journal article·2001-07

Microstructure and properties of CVD γ-Al2O3 coatings

A. Larsson, S. Ruppi

Publisher page

Abstract

This work deals with the microstructures and wear properties of chemical vapour deposited γ-Al 2 O 3 . The γ-Al 2 O 3 coatings were deposited at 800 °C on TiN and Ti(C,N) pre-coated cemented carbide substrates. The microstructures developed in the γ-Al 2 O 3 coatings and the influence of the nucleation surface on the growth of γ-Al 2 O 3 were characterised using transmission electron microscopy, electron energy-loss spectroscopy and X-ray diffraction. The γ-Al 2 O 3 coatings were fine-grained with a high density of {111} growth twins and contained some residual sulphur. γ-Al 2 O 3 was found to grow epitaxially on the investigated substrates. The mechanical properties were evaluated in metal cutting and were compared with those of κ-Al 2 O 3 coated tools. As compared with the κ-Al 2 O 3 coatings, the γ-Al 2 O 3 coatings exhibited slightly worse adhesion and tendency for edge chipping. However, the γ-Al 2 O 3 coatings showed better crater wear resistance on the rake face than κ-Al 2 O 3 coatings.
Source: openaire · Quality: candidate unverified · Source record ↗

References (30)

Show source-provided references
1. Preparation of alumina coatings by chemical vapour deposition10.1016/0040-6090(86)90214-2 ↗
2. Microstructure of CVD Al2O3
3. Crystallographic orientation and surface morphology of chemical vapor deposited Al2O310.1149/1.2120043 ↗
4. Characterization of α-Al2O3, κ-Al2O3 and α-κ multioxide coatings on cemented carbide10.1016/S0040-6090(05)80063-X ↗
5. Microstructure and performance of CVD κ-Al2O3 multilayers10.1016/0921-5093(95)10108-X ↗
6. Plasma chemical vapour deposition of aluminium oxide on hardmetal10.1016/0263-4368(96)83420-2 ↗
7. Deposition of hard crystalline coatings by bipolar pulsed d.c. PACVD10.1016/S0257-8972(98)00561-1 ↗
8. Influence of coating parameters on the structure and properties of Al2O3 layers reactively sputtered by means of pulsed magnetron sputtering10.1016/S0257-8972(96)02992-1 ↗
9. The deposition of hard crystalline Al2O3 layers by means of bipolar pulsed magnetron sputtering10.1016/S0257-8972(96)03075-7 ↗
10. Chemical vapour deposition of κ-Al2O310.1016/S0040-6090(01)00814-8 ↗
11. The crystal structures of hematite an corundum10.1021/ja01680a027 ↗
12. Refinement of the structures α-Al2O3, Ti2O3, V2O3, and Cr2O310.1524/zkri.1962.117.2-3.235 ↗
13. Space-group determination and structure model for κ-Al2O3 by convergent-beam electron diffraction10.1107/S010876819100071X ↗
14. On the crystal structure of κ-alumina
15. Crystal structure of κ-alumina: an X-ray powder diffraction, TEM and NMR study10.1039/a700054e ↗
16. Theoretical structure determination of a complex material10.1111/j.1151-2916.1999.tb01926.x ↗
17. Study of the phase transformation during calcination of aluminium hydroxides by selected area electron diffraction10.1107/S0365110X64003267 ↗
18. Structures and transformation mechanisms of the η, γ, and θ transition aluminas10.1107/S0108768191002719 ↗
19. Electronic and crystallographic structure of γ-alumina thin films10.1016/0040-6090(94)90171-6 ↗
20. Metastable alumina plymorphs: crystal structures and transition sequences10.1111/j.1151-2916.1998.tb02581.x ↗
21. Larsson A, Zackrisson J, Ruppi S. EELS investigation of structural and dielectrical properties of α-Al2O3, κ-Al2O3 and γ-Al2O3. J Am Ceram Soc (submitted)
22. Phase transformation in chemical vapour-deposited κ-alumina10.1016/0040-6090(92)90761-Y ↗
23. Microstructural changes in CVD κ-Al2O3 coated cutting tools during turning operations10.1016/S0257-8972(98)00734-8 ↗
24. Microstructural investigation of the κ-Al2O3→α-Al2O3 transformation in multilayer coatings of chemically vapour deposited κ-Al2O310.1016/0040-6090(94)90340-9 ↗
25. Characterisation of the κ-Al2O3→α-Al2O3 transformation in different single layer coatings of CVD κ-Al2O310.1016/0257-8972(95)02580-4 ↗
26. Transitions in vapor-deposited alumina from 300 to 1200 °C
27. High pressure and sintering of nano-size gamma Al2O3 powder10.1080/10426919608947544 ↗
28. A comparison between quantitative EELS and APFIM microanalysis of carbonitride grains in cermets10.1016/S0304-3991(99)00054-6 ↗
29. Microstructural characterization of wear resistant coatings
30. Larsson A, Ruppi S, Microstructure and properties of MTCVD Ti(C,N) coatings. Thin Solid Films (accepted for publication)