Dynamic recrystallization behavior of a Mo-2.0%ZrO2 alloy during hot deformation
Source abstract
Abstract
The high-temperature deformation process of molybdenum alloy reinforced by 2.0%ZrO 2 was tested in the temperature range of 1100–1400 °C and strain rate range of 0.005–1 s −1 in a vacuum environment, and the microstructure evolution during the high-temperature deformation process was investigated. Based on the Arrhenius model, the transient equation of the Mo-2.0%ZrO 2 alloy was established, and the relationship between deformation temperature, strain rate and flow stresses was described. The flow stresses of the Mo-2.0%ZrO 2 alloy were characterized by dynamic recovery and recrystallization in the deformation process. Dynamic recrystallization of the Mo-2.0%ZrO 2 alloy mostly occurs at high temperatures and low strain rates. At higher strain rates (0.1–1 s −1 ) and low temperatures (1100–1200 °C), chain-like fine crystals and fine equiaxed grains were found, indicating that partial dynamic recrystallization occurred. At low strain (0.005 s −1) and low temperatures (1100–1200 °C), equiaxed grains were found to demonstrate continuous dynamic recrystallization. Coarse equiaxed grains were found at low strain (0.005–0.1 s −1) and high temperature (1300–1400 °C), indicating a dominance of grain growth. The Mo-2.0%ZrO 2 alloy have low activation energy compared with Mo-Al 2O 3 alloy, which is beneficial to hot working. The Mo-2.0%ZrO 2 alloy has two typical textures, 〈100〉//ND and 〈111〉//ND, after high temperature deformation. As the strain decreases, there is enough kinetic energy to reduce the basal plane deviation in TD and RD directions, and the texture of Mo-2.0%ZrO 2 alloy is dominated by 〈100〉//ND.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Microstructure and high temperature deformation behavior of the Mo-ZrO2 alloys10.1016/j.jallcom.2017.05.013 ↗
2. Creep microstructures and creep behaviors of pure molybdenum sheet at 0.7 tm10.1016/j.ijrmhm.2016.06.021 ↗
3. Evaluating compressive property and hot deformation behavior of molybdenum alloy reinforced by nanoscale zirconia particles10.1016/j.jallcom.2020.158289 ↗
4. The role of stress state on the fracture toughness and toughening mechanisms of wrought molybdenum and molybdenum alloys10.1016/j.msea.2010.09.009 ↗
5. La2O3 effects on TZM alloy recovery, recrystallization and mechanical properties10.1016/j.msea.2015.03.114 ↗
6. Mechanical properties and strengthening mechanism of the hydrothermal synthesis of nano-sized α-Al2O3 ceramic particle reinforced molybdenum alloy10.1016/j.ceramint.2020.01.038 ↗
7. Influences of annealing temperature on microstructure and mechanical properties of Mo–La2O310.1016/j.ijrmhm.2011.03.003 ↗
8. Achieving an unprecedented strength-ductility balance of molybdenum alloy by homogeneously distributing yttrium-cerium oxide10.1016/j.jallcom.2021.163110 ↗
9. Investigation of stress-strain response, microstructure and texture of hot deformed pure molybdenum10.1016/j.ijrmhm.2018.02.011 ↗
10. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
11. Preparation and characterization of Mo/ZrO2–Y2O3 composites10.1016/j.ijrmhm.2018.04.018 ↗
12. High temperature mechanical properties of TZM alloys under different lanthanum doping treatments10.1016/j.jallcom.2017.03.346 ↗
13. Preparation, microstructure and properties of molybdenum alloys reinforced by in-situ Al2O3 particles10.1016/j.ijrmhm.2011.08.012 ↗
14. Modeling of flow stress of 42CrMo steel under hot compression10.1016/j.msea.2007.11.119 ↗
15. A study of hot deformation behavior and microstructural characterization of Mo–TZM alloy10.1016/j.jnucmat.2008.12.049 ↗
16. Characterization of strengthening mechanism and hot deformation behavior of powder metallurgy molybdenum10.1016/j.matdes.2011.07.065 ↗
17. Effects of strain rate on tensile properties of TZM and Moe5% re10.1016/S0022-3115(02)01191-1 ↗
18. Tensile and impact properties of TZM and Mo-5% re10.1016/0022-3115(94)91037-5 ↗
19. Microstructure and texture evolution of pure molybdenum during hot deformation10.1016/j.matchar.2019.110010 ↗
20. Constitutive modeling for high-temperature tensile deformation behavior of pure molybdenum considering strain effects10.1016/j.ijrmhm.2014.03.005 ↗
21. Effect of zirconia on low cycle fatigue and energy absorption of molybdenum alloy10.1016/j.jallcom.2021.159118 ↗
22. Effects of temperature and strain rate on the dynamic recrystallization of a medium-high-carbon high-silicon bainitic steel during hot deformation10.1016/j.vacuum.2017.11.007 ↗
23. Hot deformation behaviour of Mo-TZM and understanding the restoration processes involved10.1016/j.actamat.2018.10.037 ↗
24. Flow behavior and processing map for hot deformation of W-1.5ZrO2 alloy10.1016/j.jallcom.2019.06.179 ↗
25. A new dynamic recrystallization kinetics model for a Nb containing Ni-Fe-Cr-base superalloy considering influences of initial δ phase10.1016/j.vacuum.2017.04.030 ↗
26. Influence of nitrogen on kinetics of dynamic recrystallization in Fe-Cr-Ni-Mo steel10.1016/j.vacuum.2018.07.010 ↗
27. Effects of precipitates on microstructure evolution and texture in Mg-Zn alloy during hot deformation10.1016/j.vacuum.2017.11.002 ↗
28. Microstructure evolution of Cu-1.0Co-0.65Si-0.1Ti alloy during hot deformation10.1016/j.vacuum.2020.109376 ↗
29. Constitutive modeling of dynamic flow behavior of Ti-5553 alloy10.1016/j.jallcom.2019.02.101 ↗
30. On the mechanism of hot deformation10.1016/0001-6160(66)90207-0 ↗
31. Effect of strain rate upon plasticflow of steel10.1063/1.1707363 ↗
32. Hot compression mechanism and comparative study on constitutive models of Mo–3 vol%Al2O3 alloys10.1007/s12540-020-00831-5 ↗
33. Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK6010.1016/S1359-6454(01)00020-9 ↗
34. Hot deformation behaviors and optimization of processing parameters for Alloy 602 CA10.1016/j.jallcom.2018.08.144 ↗
35. Effect of Sn addition on the deformation behavior and microstructural evolution of Mg-Gd-Y-Zr alloy during hot compression10.1016/j.msea.2021.142026 ↗
36. Constitutive modeling for the dynamic recrystallization evolution of AZ80 magnesium alloy based on stress–strain data10.1016/j.msea.2011.07.064 ↗
37. Deformation behaviors and cyclic strength assessment of AZ31B magnesium alloy based on steady ratcheting effect10.1016/j.msea.2018.03.023 ↗
38. The microstructure and texture evolution of pure molybdenum sheets under various rolling reductions10.1016/j.matchar.2020.110357 ↗
39. Investigation on compression behavior of TZM and La2O3 doped TZM Alloys at high temperature10.1016/j.msea.2017.01.059 ↗