Vacuum heat treatment induced excellent low-temperature tensile performance of EAM fabricated 96 W alloys
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Standardization Administration of China · 2023
2. Microstructure and mechanical properties of a hot-hydrostatically extruded 93W–4.9Ni–2.1Fe alloy10.1016/j.msea.2006.07.074 ↗
3. Thermomechanical behavior and constitutive modeling of tungsten-based composite over wide temperature and strain rate ranges10.1016/j.ijplas.2012.08.004 ↗
4. Investigation of mechanical characteristics of hot-pressed sintered tungsten based advanced shielding materials
5. A boundary-based approach to the multiscale microstructural characterization of a W-Ni-Fe tungsten heavy alloy10.1016/j.scriptamat.2022.114587 ↗
6. Mechanical properties, characterization and wear behavior of powder metallurgy composites - a review10.1016/j.matpr.2020.03.389 ↗
7. Analysis of laser-induced microcracking in tungsten under additive manufacturing conditions: experiment and simulation10.1016/j.actamat.2020.04.060 ↗
8. Selective electron beam melting (SEBM) of pure tungsten: metallurgical defects, microstructure, texture and mechanical properties10.3390/ma15031172 ↗
9. Effect of processing parameters on the densification, microstructure and crystallographic texture during the laser powder bed fusion of pure tungsten10.1016/j.ijrmhm.2018.10.004 ↗
10. Achieving high-performance pure tungsten by additive manufacturing: processing, microstructural evolution and mechanical properties10.1016/j.ijrmhm.2023.106211 ↗
11. Processing of tungsten heavy alloy by extrusion-based additive manufacturing10.1016/j.ijrmhm.2022.106021 ↗
12. Traditional and additive manufacturing of a new Tungsten heavy alloy alternative10.1016/j.ijrmhm.2018.01.019 ↗
13. Powder extrusion printing and sintering densification behaviors of ultrafine 98W-1Ni-1Fe alloy powder10.3390/cryst12060875 ↗
14. Mechanical properties of a novel tungsten fiber-reinforced tungsten composite prepared through powder extrusion printing and high-pressure high-temperature sintering
15. The preparation of high-performance 96W-2.7Ni-1.3Fe alloy parts by powder extrusion 3D printing10.1016/j.msea.2021.141417 ↗
16. The simultaneous improvement of strength and ductility of the 93W-4.6Ni-2.4Fe prepared by additive manufacturing via optimizing sintering post-treatment
17. Revealing the powder size-sintering temperature synergistic effect in microstructure transformation of 97 W alloy from extrusion-based additive manufacturing process10.1016/j.jallcom.2024.178122 ↗
18. On the effect of high-temperature annealing on the microstructure and mechanical properties of a hot-rolled 90W7Ni3Fe tungsten heavy alloy10.1016/j.msea.2024.146200 ↗
19. Effect of composition, heat treatment and deformation on mechanical properties of tungsten heavy alloys10.1016/j.msea.2018.07.070 ↗
20. Combination of mechanical alloying and two-stage sintering of a 93W–5.6Ni–1.4Fe tungsten heavy alloy10.1016/S0921-5093(02)00410-0 ↗
21. Udulation of W/matrix interface by resintering of cyclically heat-treated WNiFe heavy alloys10.1016/S0924-0136(96)02695-7 ↗
22. On the remarkable fracture toughness of 90 to 97W-NiFe alloys revealing powerful new ductile phase toughening mechanisms10.1016/j.actamat.2020.01.012 ↗
23. Effect of quenching temperature on the microstructure evolutions and strength-ductility of W-Ni-Cu alloy at room-temperature and cryogenic10.1016/j.ijrmhm.2024.106697 ↗
24. Quenching-induced γ phase spinodal decomposition and interface strengthening in W-Ni-cu-co alloy10.1016/j.jallcom.2025.178460 ↗
25. Effect of cyclic heat treatment and swaging on mechanical properties of the tungsten heavy alloys10.1016/j.msea.2016.01.024 ↗
26. Impact of heat treatment on tensile properties of 97W2Ni1Fe heavy alloy10.1016/j.jnucmat.2018.09.055 ↗
27. Effect of annealing temperature on microstructure and mechanical properties of W-Ni-Fe-co alloy10.1016/j.msea.2024.147688 ↗
28. The contiguity of liquid phase sintered microstructures10.1007/BF02670329 ↗
29. Fabrication, characterization, and mechanical properties of 93W–4.9Ni–2.1Fe/95W–2.8Ni–1.2Fe–1Al2O3 heavy alloy composites10.1016/j.msea.2015.04.026 ↗
30. Synergistic effects of multi-strengthening mechanisms in exceptionally high-strength W-Ni-Fe composites10.1016/j.jallcom.2023.172361 ↗
31. Fine-grained 93W-4.9Ni-2.1Fe alloy with ultrahigh yield strength prepared via low temperature sintering of W nanocomposite powder10.1016/j.msea.2023.145298 ↗
32. The comparative strength and fracture toughness properties of commercial 95W-3.5Ni1.5Fe and 95W-3.5Ni1.5Cu tungsten heavy alloys
33. Microwave sintering of W–Ni–Fe alloy10.1016/j.scriptamat.2006.09.010 ↗
34. Effect of vacuum heat treatment on microstructure evolution and mechanical properties of 93W-4.9Ni-2.1Fe-(ZrB2) alloys10.1016/j.powtec.2022.117276 ↗
35. Structure and orientation of an intermetallic phase in a W-Ni-Co alloy10.1080/14786435.2019.1579376 ↗
36. Effect of cobalt addition on microstructure and mechanical properties of tungsten heavy alloys10.1007/s12666-017-1074-1 ↗
37. Thermo-mechanical processing, microstructure and tensile properties of a tungsten heavy alloy10.1016/j.msea.2014.06.072 ↗
38. Precipitate dissolution during deformation induced twin thickening in a CoNi-base superalloy subject to creep10.1016/j.actamat.2022.117936 ↗
39. Characterizing the boundary lateral to the shear direction of deformation twins in magnesium
40. The effect of heat treatment on phase structure and mechanical and corrosion resistance properties of high tungsten Ni-W alloy coating10.3390/coatings13091651 ↗
41. Twinning effects on strength and plasticity of metallic materials10.1557/mrs.2016.67 ↗
42. On the strengthening effects of interfaces in multilayer fee metallic composites
43. Effects of pouring temperature on microstructure, mechanical properties, and fracture behavior of Al/Mg bimetallic composites produced by lost foam casting process10.1007/s00170-016-9810-y ↗
44. Effect of Sintering Temperature on High-Entropy Alloy Particle Reinforced Aluminum Matrix Composites via Vacuum Hot-Pressing Sintering10.3390/coatings14010016 ↗
45. Effect of vacuum heat treatment on NiCrAlY coating/titanium alloy substrate system