journal article·2026-11

Sustainable recycling of WC–Co grinding sludge: Compositional control, phase stability and mechanical performance of cemented carbides

Fabio Miranda, Suzilene R. Janasi, Fernando S. Ortega, Daniel Rodrigues, Jesualdo Luiz Rossi

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

References (57)

Show source-provided references
1. Physical and chemical nature of cemented carbides
2. The critical raw materials in cutting tools for machining applications: a review10.3390/ma13061377 ↗
3. Recycling of tungsten: current share, economic limitations, technologies and future potential10.1016/j.ijrmhm.2021.105546 ↗
4. Mégret A, Vitry V, Delaunois F. Impact of the Amount of recycled cemented carbide powder on the sintering behavior of WC-Co parts. In: Proceedings of the Euro PM2019 Congress & Exhibition; 2019 Oct 13–16, Maastricht. The Netherlands. 2026.
5. European Commission · 2020
6. U.S. Geological Survey · 2020
7. How companies improve critical raw material circularity: 5 use cases. Findings from the international round table on materials criticality10.1007/s13563-022-00315-5 ↗
8. Direct recycling of WC-co grinding chip10.3390/ma16041347 ↗
9. Recycling of WC-co cemented carbides by oxidation and carbothermal reduction in combination with reactive sintering10.3176/eng.2012.2.03 ↗
10. Comprehensive hard materials: cemented carbides
11. Cemented carbide microstructures: a review10.1016/j.ijrmhm.2018.12.004 ↗
12. ITIA. Recycling of Tungsten Current Share, Economic Limitations and Future Potential. International Tungsten Industry Association, 2018. Available at: https://www.itia.info/wp-content/uploads/2024/06/ITIA_ROTP1_29052024.pdf ITIA_ROTP1_29052024 [Accessed 18 February 2026].
13. Recycling of tungsten carbide scrap metal: a review of recycling methods and future prospects10.1016/j.mineng.2018.03.036 ↗
14. Reduction of environmental impact in hardmetal technologies10.1016/j.mprp.2016.02.052 ↗
15. A comprehensive review on recycling methods for cemented tungsten carbide scraps highlighting the electrochemical techniques
16. Progress in sustainable recycling and circular economy of tungsten carbide hard metal scraps for industry 5.0 and onwards
17. Critical raw materials in cutting tools for machining applications – a review
18. Study of the processing of a recycled WC–Co powder: can it compete with conventional WC–Co powders?
19. Recovery of tungsten and cobalt from cemented tungsten carbide wastes using carbonate roasting and water leaching10.1080/10962247.2021.1876780 ↗
20. Efficient separation and recovery of cobalt from grinding waste of cemented carbide
21. Recovery of tungsten from WC–Co hard metal scraps using molten salt electrolysis
22. Comparative life cycle assessment of hardmetal chemical recycling routes10.1021/acssuschemeng.2c01969 ↗
23. Brookes · 1998
24. Experimental study to assess fracture toughness in SPS sintered WC-10% Co Hardmetal by modifying the Palmqvist test10.3390/coatings12121809 ↗
25. Indentation fracture of WC-Co cemented carbides10.1007/BF00555296 ↗
26. Evaluation of KIC of brittle solids by the indentation method with low crack-to-indent ratios
27. Upadhyaya · 1998
28. Noyan · 1987
29. Smoothing and differentiation of data by simplified least squares procedures10.1021/ac60214a047 ↗
30. Analysis of the wear of a resin-bonded diamond wheel in the grinding of tungsten carbide10.1016/S0924-0136(97)00032-0 ↗
31. Study of the processing of a recycled WC–Co powder: can it compete with conventional WC–Co powders?10.1007/s40831-021-00346-2 ↗
32. Cemented carbide phase diagrams: a review10.1016/j.ijrmhm.2011.02.004 ↗
33. (2025) optimising WC-25Co feedstock and parameters for laser-directed energy deposition
34. Experimental investigation and thermodynamic assessment of the C–Co–Fe–Ni–W system10.1016/j.ijrmhm.2015.07.021 ↗
35. ASM HANDBOOK · 1990 · 7
36. Phase composition, transition and structure stability of functionally graded cemented carbide with dual phase structure10.1007/s11771-007-0030-3 ↗
37. Phase composition and microstructure of WC–Co alloys obtained by selective laser melting
38. Comparative study of corrosion behaviors of WC-NiMo and WC-Co cemented carbides10.3390/ma16124480 ↗
39. Effect of Mo and C additions on eta phase evolution of WC-13Co cemented carbides10.3390/coatings12121993 ↗
40. Influence of aqueous milling duration on the sintered WC-10Co hard metal powders10.1007/s10853-017-1701-6 ↗
41. ISO 513:2012 — International Organization for Standardization · 2012
42. Nanostructured WC/Co composite powder prepared by high energy ball milling10.1016/j.scriptamat.2003.08.009 ↗
43. Abnormal WC crystal growth from liquid Co flux occurs via eta phase decomposition10.1016/j.ijrmhm.2021.105589 ↗
44. Fundamental aspects of phase formation in WC-based cemented carbides containing FeMn-based binders10.1016/j.ijrmhm.2023.106411 ↗
45. Materials science of cemented carbides – an overview
46. Goldstein · 2018
47. Influence of eta-phase on wear behavior of WC-Co carbides10.1155/2016/5063274 ↗
48. Morphology evolution of coarse-grained WC–Co cemented carbides10.1016/j.ijrmhm.2016.01.001 ↗
49. Design of a CBN composite abrasive to improve the performance of HSG rail maintenance grinding wheel
50. Development of a brazed–resin composite CBN grinding wheel for rail maintenance: microstructure, grinding performance and service life10.3390/coatings15091083 ↗
51. Elastic/plastic indentation damage in ceramics: the median/radial crack system10.1111/j.1151-2916.1980.tb10768.x ↗
52. A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements10.1111/j.1151-2916.1981.tb10320.x ↗
53. α-SiC-induced embrittlement in WC-(Co, Ni) hardmetals: role of silicide formation and residual stress intensification10.1016/j.ijrmhm.2026.107815 ↗
54. Analysis of the tribological behavior of high carbon and high silicon steel (HC-HSi) against pins with cemented carbide substrate and cermet in pin-on-disk tests
55. Optimized recovery of cobalt and tungsten carbide from hard metal wastes via hydrometallurgical processing
56. A method for tribological measurements of coated abrasives using a rheometer10.1007/s11249-021-01425-x ↗
57. Friction and wear characteristics of WC–Co cemented carbides in dry reciprocating sliding contact10.1016/j.wear.2010.02.029 ↗