Effect of Ti content on the microstructure and mechanical properties of TixZrNbMoV lightweight refractory high-entropy alloys
Source abstract
Abstract
In this study, we prepared Ti x ZrNbMoV (x = 1, 1.5, and 2) refractory high-entropy alloys (RHEAs) with varying amounts of Ti by vacuum arc melting. The microstructures of RHEAs are investigated by neutron diffraction, electron backscatter diffraction and transmission electron microscope. The results showed that the Ti x ZrNbMoV alloys mainly comprise body centered cubic phases and hexagonal close packed phases and the average grain size of alloys decreases as the Ti element content increases. Room-temperature compressive tests showed that increasing the Ti content of the alloys improved their ductility, although their strength decreased. Compared with some previously reported RHEAs, the Ti xZrNbMoV RHEAs prepared in this study possessed better comprehensive mechanical properties, with the specific yield strength of the TiZrNbMoV alloy being as high as 312 kPa·m 3/kg. Finally, the deformation behavior of Ti x ZrNbMoV RHEAs was studied by nanoindentation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Refractory high-entropy alloys [J]10.1016/j.intermet.2010.05.014 ↗
2. High strength dual fcc phase CoCuFeMnNi high-entropy alloy wires with dislocation wall boundaries stabilized by phase boundaries [J]10.1016/j.msea.2021.141875 ↗
3. Formation mechanism of hierarchical twins in the CoCrNi medium entropy alloy [J]10.1016/j.jmst.2022.08.033 ↗
4. Enhanced mechanical properties of HfMoTaTiZr and HfMoNbTaTiZr refractory high-entropy alloys [J]10.1016/j.intermet.2015.03.013 ↗
5. Microstructure and tribological properties of in-situ carbide/CoCrFeNiMn high entropy alloy composites synthesized by flake powder metallurgy [J]10.1016/j.triboint.2023.108295 ↗
6. Friction-induced rapid amorphization in a wear-resistant (CoCrNi)88Mo12 dual-phase medium-entropy alloy at cryogenic temperature [J]10.1016/j.compositesb.2023.110833 ↗
7. Design and characterization of metallic glass/graphene multilayer with excellent nanowear properties [J]10.1007/s40544-021-0581-6 ↗
8. Ion irradiation response and mechanical behavior of reduced activity high entropy alloy [J]10.1016/j.jnucmat.2019.151955 ↗
9. Microstructure and mechanical properties of VTaTiMoAlx refractory high entropy alloys [J]10.4028/www.scientific.net/MSF.898.638 ↗
10. Effects of vanadium concentration on mechanical properties of VxNbMoTa refractory high-entropy alloys [J]10.1016/j.msea.2021.140848 ↗
11. Microstructure and mechanical properties of refractory HfMo 0.5 NbTiV 0.5 Si x high-entropy composites [J]10.1016/j.jallcom.2016.10.014 ↗
12. Alloy design for intrinsically ductile refractory high-entropy alloys [J]10.1063/1.4966659 ↗
13. Effect of Ti content on microstructure and properties of Ti_xZrVNb refractory high-entropy alloys [J]10.1007/s12613-020-2040-1 ↗
14. Laser-clad FeCrAl/TiC composite coating on ferrite/martensitic steel: significant grain refinement and wear resistance enhancement induced by adding TiC [J]10.1016/j.surfcoat.2023.129272 ↗
15. Simultaneous enhancement of strength and toughness in a medium-carbon martensitic steel by Ti-Mo addition [J]10.1007/s11665-021-06537-y ↗
16. Effect of Ti-B grain refiners on wear and corrosion of the A332 alloy with Sr modification [J]10.3390/app13010430 ↗
17. Phase composition and solid solution strengthening effect in TiZrNbMoV high-entropy alloys [J]10.1016/j.matdes.2015.06.072 ↗
18. NbTaV-(Ti,W) refractory high-entropy alloys: experiments and modeling [J]10.1016/j.msea.2016.07.102 ↗
19. Interstitial strengthening of refractory ZrTiHfNb0.5Ta0.5Ox (x = 0.05, 0.1, 0.2) high-entropy alloys [J]10.1016/j.matlet.2018.05.123 ↗
20. Hexagonal closed-packed precipitation enhancement in a NbTiHfZr refractory high-entropy alloy [J]10.3390/met9050485 ↗
21. Stability of a planar interface during solidification of a dilute binary alloy [J]10.1063/1.1713333 ↗
22. The role of carbon in grain refinement of cast CrFeCoNi high-entropy alloys [J]10.1007/s11661-018-4549-8 ↗
23. Development and thermal stability of Cr10Mo25Ta25Ti15V25 refractory high entropy alloys [J]
24. Modeling of excess vacancy annihilation at different types of sinks [J]10.1016/j.actamat.2011.02.020 ↗
25. Phase stability in high entropy alloys: formation of solid-solution phase or amorphous phase [J]10.1016/S1002-0071(12)60080-X ↗
26. Solid-solution phase formation rules for multi-component alloys [J]10.1002/adem.200700240 ↗
27. Effect of Zr on the as-cast microstructure and mechanical properties of lightweight Ti2VNbMoZrx refractory high-entropy alloys [J]10.1016/j.ijrmhm.2021.105762 ↗
28. Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy [J]10.1016/j.jallcom.2011.02.171 ↗
29. Tuning ideal tensile strengths and intrinsic ductility of bcc refractory alloys [J]10.1103/PhysRevLett.112.115503 ↗
30. A lightweight Al0.8Nb0.5Ti2V2Zr0.5 refractory high entropy alloy with high specific yield strength [J]10.1016/j.matlet.2022.133144 ↗
31. Effect of Al addition on structural evolution and mechanical properties of the AlxHfNbTiZr high-entropy alloys [J]10.1016/j.mtcomm.2018.06.004 ↗
32. Structure and mechanical properties of B2 ordered refractory AlNbTiVZrx (x = 0–1.5) high-entropy alloys [J]10.1016/j.msea.2017.08.019 ↗
33. Effect of Si additions on microstructure and mechanical properties of refractory NbTaWMo high-entropy alloys [J]10.1007/s10853-018-03280-z ↗
34. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys [J]10.1016/j.intermet.2011.01.004 ↗
35. Microstructure and mechanical properties of a novel refractory high entropy alloy HfMoScTaZr [J]10.1016/j.ijrmhm.2021.105568 ↗
36. Size effects of nanoindentation creep [J]10.1557/jmr.2004.19.2.513 ↗
37. Nanoindentation creep behavior of diverse microstructures in a pre-strained interstitial high-entropy alloy by high-throughput mapping [J]10.1016/j.msea.2022.143988 ↗
38. Nanoindentation creep behavior in a CoCrFeCuNi high-entropy alloy film with two different structure states [J]10.1016/j.msea.2014.10.065 ↗
39. Nanoscale creep deformation in Zr-based metallic glass [J]10.1016/j.intermet.2013.03.006 ↗
40. Enhanced creep resistance of Ti30Al25Zr25Nb20 high-entropy alloy at room temperature [J]10.1016/j.jallcom.2021.161038 ↗
41. High-temperature nano-indentation creep of reduced activity high entropy alloys based on 4-5-6 elemental palette [J]10.3390/e22020230 ↗
42. A simple dislocation model of deformation resistance of ultrafine-grained materials explaining Hall–Petch strengthening and enhanced strain rate sensitivity [J]10.1016/j.actamat.2008.12.041 ↗
43. Room temperature creep behavior of Ti–Nb–Ta–Zr–O alloy [J]10.1016/j.matchar.2016.05.001 ↗
44. High-temperature deformation in a Ta–W alloy [J]10.1016/S1359-6454(98)00434-0 ↗
45. Tensile creep behavior of HfNbTaTiZr refractory high entropy alloy at elevated temperatures [J]10.1016/j.actamat.2022.118188 ↗
46. Creep strength of refractory high-entropy alloy TiZrHfNbTa and comparison with Ni-base superalloy CMSX-4 [J]
47. Nanoindentation study on the creep characteristics of high-entropy alloy films: fcc versus bcc structures [J]10.1016/j.ijrmhm.2015.08.010 ↗
48. Strain rate sensitivity of a novel refractory high entropy alloy: intrinsic versus extrinsic effects [J]10.1016/j.msea.2019.138326 ↗
49. Modification of cantor high entropy alloy by the addition of Mo and Nb: microstructure evaluation, nanoindentation-based mechanical properties, and sliding wear response assessment [J]
50. Creep of face-centered-cubic {111} and {100} grains in FeCoNiCrMn and FeCoNiCrMnAl alloys: orientation and solid solution effects [J]10.1016/j.intermet.2018.10.006 ↗
51. Effects of loading strain rate and stacking fault energy on nanoindentation creep behaviors of nanocrystalline Cu, Ni-20 wt.%Fe and Ni [J]10.1016/j.jallcom.2015.06.094 ↗