journal article·2017-06

Effect of ball-milling time on structural characteristics and densification behavior of W-Cu composite powder produced from WO 3 -CuO powder mixtures

Sung-Soo Ryu, Hae-Ryong Park, Young Do Kim, Hyun Seon Hong

Publisher page

Abstract

Abstract Understanding the microstructure of W–Cu nanocomposite powder is essential for elucidating its sintering mechanism. In this study, the effect of milling time on the structural characteristics and densification behavior of W-Cu composite powders synthesized from WO3-CuO powder mixtures was investigated. The mixture of WO3 and CuO powders was ball-milled in a bead mill for 1 h and 10 h followed by reduction by heat-treating the mixture at 800 °C in H2 atmosphere with a heating rate of 2 °C/min to produce W-Cu composite powder. The microstructure analysis of the reduced powder obtained by milling for 1 h revealed the formation of W–Cu powder consisting of W nanoparticle-attached Cu microparticles. However, Cu-coated W nanocomposite powder consisting of W nanoparticles coated with a Cu layer was formed when the mixture was milled for 10 h. Cu-coated W nanopowder exhibited an excellent sinterability not only in the solid-phase sintering stage (SPS) but also in the liquid-phase sintering stage (LPS). A high relative sintered density of 96.0% was obtained at 1050 °C with a full densification occurring on sintering the sample at 1100 °C. The 1 h-milled W-Cu powder exhibited a high sinterability only in the LPS stage to achieve a nearly full densification at 1200 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Properties of sintered and infiltrated tungsten-copper electrical contact material
2. Effect of tungsten content on the properties and structure of cold extruded Cu-W composite materials
3. Powder metallurgy processing of thermal management materials for microelectronic applications
4. Massalski · 1990 · 1503
5. Densification during sintering in the presence of a liquid phase10.1063/1.1735155 ↗
6. Characterization of the degree of mixing in liquid-phase sintering experiments10.1179/pom.1975.18.36.001 ↗
7. Activated sintering of tungsten-copper contact materials10.1179/pom.1979.22.1.5 ↗
8. A theory of activated liquid phase sintering and its application to the W–Cu system
9. Densification and microstructure of the nanocomposite W-Cu powders densification and microstructure of the nanocomposite W-Cu powdersDensification and microstructure of the nanocomposite W–Cu powders10.1016/0965-9773(95)00152-2 ↗
10. Full densification of loosely packed W–Cu composite powders10.1179/pom.1998.41.1.51 ↗
11. Fabrication of W–20wt% Cu composite nano powder and sintered composite with high thermal conductivity10.1016/S0167-577X(03)00071-5 ↗
12. Fabrication and characterization of W–15Cu composite powders by a novel mechano-chemical process10.1016/j.msea.2007.11.022 ↗
13. Thermochemical preparation of W–25%Cu nanocomposite powder through a CVT mechanism10.1016/j.matchar.2009.05.001 ↗
14. Sintering of nanostructured W–Cu alloys prepared by mechanical alloying10.1016/S0965-9773(98)00065-8 ↗
15. Mechanical alloying of the immiscible system W–Cu10.1016/0965-9773(95)00082-8 ↗
16. Structural changes during synthesizing of nanostructured W–20wt% Cu composite powder by mechanical alloying10.1016/j.msea.2006.09.005 ↗
17. Preparation of W–Cu nanocomposite powder by hydrogen-reduction of ball-milled W and CuO powder mixture10.1016/j.matlet.2003.08.035 ↗
18. W–15wt%Cu nano-composite produced by hydrogen-reduction/sintering of WO3–CuO nano-powder10.1016/j.ijrmhm.2010.02.002 ↗
19. Synthesis and characterization of W–Cu nanopowders by a wet-chemical method10.1016/j.ijrmhm.2011.01.006 ↗
20. Synthesis, characterization and densification of W–Cu nanocomposite powders10.1016/j.ijrmhm.2011.03.011 ↗
21. Synthesis of ultrafine/nanocrystalline W–(30–50)Cu composite powders and microstructure characteristics of the sintered alloys10.1016/j.ijrmhm.2011.06.011 ↗
22. On sinterability of Cu-coated W nanocomposite powder prepared by a hydrogen reduction of a high-energy ball-milled WO3–CuO mixture10.1007/s10853-012-6557-1 ↗
23. Effect of pre-reduced Cu particles on hydrogen-reduction of W-oxide in WO3–CuO powder mixtures10.1016/j.msea.2005.04.010 ↗
24. Solid-state spreading and sintering of multiphase materials10.1016/j.msea.2007.01.160 ↗
25. Effects of tungsten particle size and copper content on densification of liquid-phase-sintered W–Cu10.1007/s11661-005-0277-y ↗