Understanding the wettability and solubility properties of TiCx-steel systems
Source abstract
Abstract
Dense non-stoichiometric TiC x ceramics (TiC 0.8, TiC 0.73, TiC 0.7 and TiC 0.58) had been fabricated by Spark Plasma Sintering (SPS) at elevated temperature and pressure. High temperature contact angle tests were performed on TiC x-45 steel/brake disc (BD) materials using a sessile drop technique. The influence of temperature, ceramic and steel composition on wetting behavior was examined, and the interfacial reactions during liquid penetration were explored. The results had established that increased temperatures and decreased ceramic x values enhanced the wetting of TiC x-steel systems. The wetting mechanisms of TiC 0.8–45 steel, TiC 0.73–45 steel, and TiC 0.7–45 steel systems were driven by dissolution effects with the formation of TiC and Fe. Conversely, wetting of TiC 0.58–45 steel was driven by reaction that resulted in the formation of brittle Fe 2Ti. Careful control of the C/Ti ratio was essential to prevent Fe 2Ti formation where the optimum TiC x composition was identified (x = 0.7). At high temperatures, Ti atoms in TiC x were more likely to combine with C atoms from Cr and Mo carbides, promoting BD material diffusion in TiC x.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. The reciprocating wear behaviour of TiC-304L stainless steel composites prepared by melt infiltration10.1016/j.wear.2013.03.040 ↗
2. The effects of TiC grain size and steel binder content on the reciprocating wear behaviour of TiC-316L stainless steel cermets10.1016/j.wear.2016.01.008 ↗
3. Chemical composition, microstructure and sintering temperature modifications on mechanical properties of TiC-based cermet - a review10.1016/j.matdes.2014.10.081 ↗
4. Reacting and stability of carbide and solid lubricant additions to PM high speed steel10.1179/pom.1993.36.4.267 ↗
5. Microstructural development and sintering kinetics in ceramic reinforced high speed steel metal matrix composites10.1179/pom.1997.40.2.143 ↗
6. The study of wear characteristics of sintered high speed steels containing CaF2, MnS and TiC additives at elevated temperature10.1016/j.wear.2004.01.016 ↗
7. Microstructure and mechanical properties of lightweight TiC-steel composite prepared by liquid pressing infiltration process10.1016/j.matchar.2020.110202 ↗
8. Microstructural damage following reciprocating wear of TiC-stainless steel cermets10.1016/j.triboint.2016.10.011 ↗
9. Characterization of microstructure and tensile fracture behavior in a novel infiltrated TiC-steel composite10.1016/j.scriptamat.2015.09.028 ↗
10. Microstructure and properties of TiC-high manganese steel cermet prepared by different sintering processes10.1016/j.jallcom.2015.08.047 ↗
11. Microstructure and mechanical properties of TiC-Fe surface gradient coating on a pure titanium substrate prepared in situ10.1016/j.jallcom.2018.08.316 ↗
12. Effect of Mo addition mode on the microstructure and mechanical properties of TiC-high Mn steel cermets10.1016/j.ceramint.2019.11.023 ↗
13. Effect of Fe-Mo-Cr pre-alloyed powder on the microstructure and mechanical properties of TiC-high-Mn-steel cermet10.1016/j.ijrmhm.2019.105031 ↗
14. Microstructure and mechanical properties of TiC0.5 reinforced copper matrix composites10.1016/j.msea.2013.09.054 ↗
15. Tensile behavior and strengthening mechanism in ultrafine TiC0.5 particle reinforced Cu-Al matrix composites10.1016/j.jallcom.2014.10.123 ↗
16. Microstructure evolution of Cu-TiC composites with the change of Ti/C ratio10.1016/j.rinp.2019.102369 ↗
17. Study of the synthesis process of non-stoichiometric TiC in Cu-Ti melts10.1016/j.rinp.2018.05.011 ↗
18. In-situ synthesis of TiC/Fe alloy composites with high strength and hardness by reactive sintering10.1016/j.jmst.2017.03.006 ↗
19. Effect of C/Ti ratio on densification, microstructure and mechanical properties of TiCx prepared by reactive spark plasma sintering10.1016/j.ceramint.2017.09.202 ↗
20. Ni bonded TiC cermet pyramidal lattice structures10.1016/j.eml.2016.11.004 ↗
21. Microstructural characterization and compression properties of TiC0.61/cu(Al) composite synthesized from Cu and Ti3AlC2 powders10.1016/j.jallcom.2014.02.159 ↗
22. Mechanical properties of polycrystalline TiC
23. Synthesis of TiC by controlled ball milling of titanium and carbon10.1007/s10853-006-0291-5 ↗
24. Interface structure and wetting behaviour of Cu/Ti3SiC2 system10.1179/1743676114Y.0000000185 ↗
25. Microstructure and properties of Ti(C,N)-Mo2C-Fe cermets10.1016/j.ijrmhm.2009.01.003 ↗
26. Liang · 1994
27. Performance analysis of Fe-N compounds based on valence electron structure10.1016/j.jallcom.2018.11.293 ↗