journal article·2025-01

Effect of 1.5TiC/1.5TiC + 0.6 Ce2O3 addition on the oxidation behavior of WC-Cu-10Ni-5Mn-3Sn cemented carbides

Xiulan Li, Xiao Jiang, Xinjun Zhou, Xuan Li, Xudong Zhang

Publisher page

Abstract

The oxidation experiments on WC-Cu-10Ni-5Mn-3Sn-1.5TiC and WC-Cu-10Ni-5Mn-3Sn-1.5TiC-0.6Ce 2O 3 materials were carried out for 2 h, 4 h, 6 h, 8 h, and 10 h in the temperature range of 500–800 °C, respectively, to elucidate the effects of oxidation temperatures and times on the properties of cemented carbides. The evolution laws of oxidation products and oxide layer microstructure of WC-Cu-10Ni-5Mn-3Sn-1.5TiC-0.6 Ce 2O 3 cemented carbide material with the change of temperature and time were mainly investigated. The oxidation behavior and oxidation mechanism were analyzed in combination with the oxidation kinetics and thermodynamics of the formation of oxidation products. The results revealed that the addition of Ce 2O 3 improved the oxidation resistance of the cemented carbide material at 500–800 °C after 2–10 h of heat treatment. With the increase of oxidation temperature or the prolongation of oxidation time at the same temperature, the oxidation resistance of the cemented carbide material decreased. The cemented carbides were shown to withstand a long-term oxidation at 500 °C. However, the surface of the material was completely oxidized even after 2 h of oxidation at the temperature of 800 °C. The products of the interaction between O 2− and metal ions appeared in the following order: Cu 2O, WO 2, WO 3 + Mn 3O 4 + MnO, CuO, W 18O 49, and Mn 2O 3 + MnO 2. Moreover, the oxidation products of the same element changed from low to high valence. However, the high-valence oxidation was also reduced to a low-valence state in the complex oxidation process involving many elements. Meanwhile, the oxidation products with greater thermodynamic driving force were not detected in the oxide layer due to the influence of element diffusion, the ionization energy and the competition with O 2 during the formation and growth of oxides.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (74)

Show source-provided references
1. Preparation, properties and microstructure of high hardness WC-Co cemented carbide tool materials for ultra-precision machining10.1016/j.ijrmhm.2023.106356 ↗
2. Thermal properties of cemented carbides used for metal cutting10.1016/j.ijrmhm.2022.106097 ↗
3. Wear phenomena in different cemented carbides during rotary-percussive drilling in reinforced concrete10.1016/j.ijrmhm.2022.105941 ↗
4. Influence of tool material properties on the wear behavior of cemented carbide tools with rounded cutting edges
5. On the existence of a thermal contact resistance at the tool-chip interface in dry cutting of AISI 1045: formation mechanisms and influence on the cutting process10.1016/j.applthermaleng.2012.06.047 ↗
6. Feasibility of cobalt-free nanostructured WC cutting inserts for machining of a TiC/Fe composite10.3390/ma14123432 ↗
7. High-temperature oxidation behaviour of WC-FeAl composite fabricated by spark plasma sintering10.1016/j.ceramint.2018.06.168 ↗
8. Advances in thermally sprayed WC-based wear-resistant coatings: co-free binders, processing routes and tribological behavior10.1007/s11666-022-01358-4 ↗
9. Effects of Mo2C, Ni binder and laser surface modification on WC inserts for turning Ti-6Al-4V10.1016/j.ijrmhm.2019.105145 ↗
10. Thermal fatigue behaviour of WC-20Co and WC-30(CoNiCrFe) cemented carbide10.1016/j.ijrmhm.2016.06.014 ↗
11. Coated cemented carbide tool life extension accompanied by comb cracks: the milling case of 316L stainless steel10.1016/j.wear.2018.11.019 ↗
12. Mechanism of adhesion failure during interrupted cutting with cemented carbide tools: experimental and ab-initio perspective10.1016/j.ijrmhm.2021.105549 ↗
13. Oxidation behavior of ultrafine WC-based cemented carbides with AlxCoCrCuFeNi high-entropy alloy binders10.1016/j.ceramint.2020.11.217 ↗
14. Influence of Ru content on mechanical, corrosion and oxidation behaviors of WC-15Co cemented carbides10.1016/j.ceramint.2023.04.244 ↗
15. Effect of the additive graphene oxide on tribological properties of WC-Co cemented carbide10.1016/j.ijrmhm.2022.105962 ↗
16. The selective oxidation behaviour of WC–co cemented carbides during the early oxidation stage10.1016/j.corsci.2015.02.033 ↗
17. Effect of (Ti, W) C/TaC addition on the early oxidation behavior of surface layer of WC-Co cemented carbides10.1016/j.corsci.2020.108857 ↗
18. Effect of grain size on oxidation resistance of WC-6wt%Co cemented carbide sintered by spark plasma sintering10.1016/j.ijrmhm.2023.106108 ↗
19. High-temperature oxidation behavior of coarse-grained WC-30%(Co-Ni-Cr) cemented carbides with different binder components
20. Oxidation behavior of functionally graded cemented carbides with CoNiFeCr multi-principal-element alloy binder10.1016/j.jallcom.2023.172069 ↗
21. High temperature fracture mechanism of ultrafine WC-Co cemented carbides containing (Ti,W)C10.1016/j.ijrmhm.2020.105428 ↗
22. Influence mechanism of AlCoCrFeNi content on the wide temperature domain tribological properties of WC-based cemented carbides10.1016/j.ijrmhm.2023.106159 ↗
23. Study on the oxidation of WC-Co cemented carbide under different conditions
24. The microstrcture and high-temperature oxidation resistance of tungsten carbide with high entropy alloys as binder10.2109/jcersj2.22018 ↗
25. Effects of Y2O3 addition on microstructures and mechanical properties of WC-Co functionally graded cemented carbides10.1016/j.ijrmhm.2014.11.004 ↗
26. Effeect of TiB2/WC addition on the oxidation behavior of Ti(C,N)-304ss cermets during the early oxidation stage10.1016/j.corsci.2019.108118 ↗
27. Liquid phase sintering and oxidation resistance of WC–Ni–Co–Cr cemented carbides10.1016/j.ijrmhm.2010.02.010 ↗
28. Habainy · 2013
29. Cinetique d’oxydation sous faible pression d’oxygene d’echantillons pulverulents de monocarbures de zirconium et de tungstene etd’hemicarbure de molibdene
30. Remarkable improvement in high temperature oxidation resistance of WC-12Co by the addition of CrSi210.1016/j.ijrmhm.2021.105497 ↗
31. Thermal oxidation behavior of WC–Co hard metal machining tool tip scraps10.1016/j.jmatprotec.2012.01.009 ↗
32. Mechanism of the early stages of oxidation of WC–Co cemented carbides10.1016/j.corsci.2015.11.007 ↗
33. Oxidation behaviour and properties of carbide ceramic reinforced Ni-based composite coatings at 700 °C10.1016/j.ceramint.2024.07.234 ↗
34. High-temperature oxidation of tungsten carbide-cobalt composites in the presence of MDF
35. Kinetics inversion in isothermal oxidation of uncoated WC-based carbides between 450 and 800°C10.1016/j.corsci.2008.12.022 ↗
36. High-temperature oxidation behaviour of vacuum hot-pressed WC-15 wt% Al2O3 composites10.1016/j.ceramint.2022.01.079 ↗
37. Outstanding high-temperature oxidation and wear-resistance of WC based cermets10.1016/j.jmst.2022.12.071 ↗
38. Investigation of the oxidation behavior and high oxidation-resistant mechanism of Ti(C,N)-based cermets10.1016/j.corsci.2020.108959 ↗
39. Oxidation behavior of WC–Co cemented carbide in elevated temperature
40. A study on WC-Ni cemented carbides: constitution, alloy compositions and properties, including corrosion behavior10.1016/j.ijrmhm.2021.105750 ↗
41. Kinetics and oxidation behavior of laser clad WC-Co and Ni/WC-Co coatings10.1016/j.ceramint.2018.04.087 ↗
42. Corrosion behaviors of Ni-WC cemented carbide in high temperature molten fluoride salt and vapor10.1016/j.jnucmat.2022.153541 ↗
43. Oxidation of WC-Co, WC-Ni and WC-Co-Ni hard metals in the temperature range 500-800°C10.1016/0263-4368(96)00009-1 ↗
44. Corrosion resistance of WC hardmetals with different Co and Ni-based binders10.1016/j.ijrmhm.2022.105799 ↗
45. Effect of solute elements (Cr, Mo, Fe, Co) on the adhesion properties of WC/Ni-based binder interface: a first-principles study10.1016/j.ijrmhm.2021.105563 ↗
46. Microstructure and mechanical properties of WC-TiN-Co and WC-TiN-Mo2C-Co(Ni) cemented carbides10.1016/0272-8842(92)90082-O ↗
47. Microstructure and thermomechanical characteristics of spark plasma sintered TiC ceramics doped with nano-sized WC10.1016/j.ceramint.2018.10.125 ↗
48. WC-based cemented carbides with high entropy alloyed binders: a review10.3390/met13010171 ↗
49. Effects of NbC additions on the microstructure and properties of nonuniform structure WC-Co cemented carbides10.1016/j.msea.2017.01.077 ↗
50. Influence of WC replacement by TiC and (Ta,Nb)C on the oxidation resistance of Co-based cemented carbides10.1016/j.ijrmhm.2008.12.009 ↗
51. Effect of TiC content on oxidation behavior of sintered WC-TiC-TaC alloys10.4028/www.scientific.net/MSF.534-536.1173 ↗
52. Effect of Y2O3 addition on high-temperature oxidation of binderless tungsten carbide
53. Ablation behavior and mechanisms of ZrC-SiC-MoSi2 coated C/C-SiC-ZrC ceramic matrix composites under oxyacetylene torch10.1016/S1003-6326(22)66102-8 ↗
54. Effect of microstructure on oxidation resistance of MoSi2 fabricated by spark plasma sintering10.1016/j.vacuum.2003.12.081 ↗
55. Preparation of MoSi2-SiB6 oxidation inhibition coating on graphite by spark plasma sintering method10.1016/j.surfcoat.2020.126511 ↗
56. Microstructure and thermoelectric properties of p and n type doped β-FeSi2 fabricated by mechanical alloying and pulse plasma sintering
57. Microstructural evolution and mechanical properties of TiC-containing WC-based cemented carbides prepared by pressureless melt infiltration10.1016/j.ceramint.2022.08.107 ↗
58. Impact of Ce2O3 on microstructure and properties of matrix-body for PDC drill bits synthesized via pressureless melt infiltration10.1016/j.ceramint.2022.06.006 ↗
59. Zhang · 2005
60. Effect of grain size on the oxidation behavior of CVD tungsten at 800 °C
61. Effects of CeO2 on microstructure and properties of TiC/Ti2Ni reinforced Ti-based laser cladding composite coatings10.1016/j.optlaseng.2019.03.001 ↗
62. Long-range migration behavior of rare earth additives in WC–Co cemented carbides10.1016/j.ijrmhm.2014.04.020 ↗
63. Effect of CeO2 on microstructure and corrosive wear behavior of laser-cladded Ni/WC coating10.1016/S0040-6090(00)01536-4 ↗
64. Qu · 1980
65. Li · 1980
66. Ma · 1986
67. Shu · 1995
68. Yin · 1998
69. Ye · 2002
70. Gassik · 1994
71. Dai · 2018
72. Influences of Cr contents on oxidation behavior of WC-co-Ni-Cr cemented carbides at 900 °C10.1016/j.ijrmhm.2023.106466 ↗
73. X-ray photoelectron spectroscopic studies of nickel-oxygen surfaces using oxygen and argon ion-bombardment10.1016/0039-6028(74)90281-7 ↗
74. Early high-temperature oxidation behavior of Ti(C,N)-based cermets with multi-component AlCoCrFeNi high-entropy alloy binder10.1016/j.ijrmhm.2014.01.005 ↗