Ultrafine-grained surface layer of tungsten via a simple two-step microstructure modulation
Source abstract
Abstract
Surface nanocrystallization , which involves the generation of ultrafine or nanosized grains on the surface layer, presents attractive potential to improve the properties of metallic materials. Here, we report a simple two-step microstructure modulation strategy to achieve an ultrafine-grained surface layer on pure tungsten (W). Abundant deformation embryos of dislocations among the W surface layer are firstly created by mechanical grinding and then evolve into ultrafine grains with representative low-angle grain boundaries by subsequently annealing or electron beam bombardments. This leads to uniform and ubiquitous ultrafine grains with the size <500 nm and covering a thickness of 1–2 ultrafine grains on the surface layer. Importantly, these ultrafine-grained structure exhibits outstanding creep resistances, as evidenced by reduced creep displacement and strain rate sensitivity when compared to the coarse-grained W matrix. The present study demonstrates a practical route to achieving surface nanocrystallization by combining surface mechanical attrition with surface heat treatments, and it opens up significant potential for the development of high-performance metallic metals and alloys through surface engineering.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Enhanced fatigue endurance limit of cu through low-angle dislocation boundary10.1016/j.actamat.2022.118542 ↗
2. Fabrication and microstructure characterization of W-La2O3-Y2O3 composites by spark plasma sintering and hot isostatic pressing10.1016/j.ijrmhm.2023.106533 ↗
3. Microstructural evolution and thermal fatigue damage mechanism of second-phase dispersion strengthened tungsten composites under repetitive thermal loads10.1016/j.jmst.2022.09.007 ↗
4. Effect of Y2O3 nanoparticles on enhancing microstructure and mechanical properties of oxide dispersion strengthened W alloy10.1016/j.ijrmhm.2023.106534 ↗
5. Stabilizing nanostructures in metals using grain and twin boundary architectures10.1038/natrevmats.2016.19 ↗
6. Ultrafine-grained W alloy prepared by spark plasma sintering with high thermal stability and excellent irradiation resistance10.1088/1741-4326/ab6306 ↗
7. Controlling radiation damage10.1126/science.1188088 ↗
8. Manufacturing of tungsten and tungsten composites for fusion application via different routes10.1007/s42864-019-00011-y ↗
9. Room temperature ductile W-Y2O3 alloy with high thermal shock resistance10.1016/j.ijrmhm.2023.106261 ↗
10. Characterization of W-Er2O3 alloy prepared by co-deposition method and spark plasma sintering10.1016/j.ijrmhm.2023.106253 ↗
11. Fabrication and characterization of nanocrystalline ODS-W via a dissolution-precipitation process10.1016/j.ijrmhm.2019.01.002 ↗
12. Accelerated sintering in phase-separating nanostructured alloys10.1038/ncomms7858 ↗
13. Microstructure and mechanical properties of super-strong nanocrystalline tungsten processed by high-pressure torsion10.1016/j.actamat.2006.05.005 ↗
14. Precision-improving manufacturing produces ordered ultra-fine grained surface layer of tungsten heavy alloy through ultrasonic elliptical vibration cutting
15. Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment10.1016/j.msea.2003.10.261 ↗
16. An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment10.1016/S1359-6454(02)00310-5 ↗
17. Enhancing mechanical properties of ultrafine-grained tungsten for fusion applications10.1016/j.ijrmhm.2023.106125 ↗
18. Effect of He content on microstructure, mechanical properties and He thermal desorption behavior of W film fabricated by RF magnetron sputtering10.1016/j.jnucmat.2020.152151 ↗
19. Grain structure and magnetism of nanocrystalline ferromagnets10.1109/20.42292 ↗
20. Grain size engineering of bcc refractory metals: top-down and bottom-up–application to tungsten10.1016/j.msea.2007.02.099 ↗
21. Interfacial diffusion in cu with a gradient nanostructured surface layer10.1016/j.actamat.2009.12.024 ↗
22. Nanostructure formation mechanism of α-titanium using SMAT10.1016/j.actamat.2004.05.023 ↗
23. Formation of nanostructured surface layer on AISI 304 stainless steel by means of surface mechanical attrition treatment10.1016/S1359-6454(02)00594-3 ↗
24. Use of tungsten material for the ITER divertor10.1016/j.nme.2016.07.003 ↗
25. Microstructure and nanoindentation creep behavior of TiC reinforced steel matrix composite after stabilizing heat treatments10.1016/j.ceramint.2022.05.122 ↗
26. Deuterium trapping by deformation-induced defects in tungsten
27. In situ measurements of low energy D plasma-driven permeation through He pre-damaged W10.1088/1741-4326/ac4716 ↗
28. Greater tolerance for nuclear materials10.1038/nmat2266 ↗
29. Recent progress of radiation response in nanostructured tungsten for nuclear application10.1007/s42864-021-00075-9 ↗
30. HELCZA-high heat flux test facility for testing ITER EU first wall components10.1016/j.fusengdes.2017.03.059 ↗
31. Heat loads and shape design of the ITER first wall10.1016/j.fusengdes.2010.07.022 ↗
32. Development of tungsten armored high heat flux plasma facing components for ITER like divertor application10.1016/j.fusengdes.2019.03.170 ↗
33. Post examination of tungsten monoblocks subjected to high heat flux tests of ITER full-tungsten divertor qualification program10.1016/j.fusengdes.2017.06.009 ↗
34. Hierarchical microstructures enabled excellent low-temperature strength-ductility synergy in bulk pure tungsten10.1016/j.actamat.2022.117765 ↗
35. Achieving high strength/ductility in bulk W-Zr-Y2O3 alloy plate with hybrid microstructure10.1016/j.matdes.2016.06.012 ↗
36. An investigation of the microstructure and ductility of annealed cold-rolled tungsten10.1016/j.actamat.2018.10.002 ↗
37. Formation of nano-laminated structure in nickel by means of surface mechanical grinding treatment10.1016/j.actamat.2015.06.014 ↗
38. Creep feed grinding induced gradient microstructures in the superficial layer of turbine blade root of single crystal nickel-based superalloy
39. Plastic strain-induced grain refinement at the nanometer scale in copper10.1016/j.actamat.2006.07.013 ↗
40. Mechanisms of deformation and ductility in tungsten - a review10.1016/j.ijrmhm.2018.04.021 ↗
41. Effect of strain rate on deformation behavior of AlCoCrFeNi high-entropy alloy by nanoindentation10.1007/s11665-016-2082-8 ↗
42. Nanoindentation characterized initial creep behavior of a high-entropy-based alloy CoFeNi10.1016/j.intermet.2014.05.007 ↗
43. A review of nanoindentation continuous stiffness measurement technique and its applications10.1016/S1044-5803(02)00192-4 ↗