Effects of micro/nano CeO2 on the microstructure and properties of WC-10Co cemented carbides
Source abstract
Abstract
Abstract WC-10Co cemented carbide with micro/nano CeO2 additives was obtained through powder metallurgy technology. The effects of CeO2 grain size on the structure and performances were investigated by scanning electron microscope, X-ray diffraction, mechanical properties testers and friction testing machine. The results showed that the grain size of WC decreased after adding micro/nano CeO2, and the refining effect of nano CeO2 was better than that of micro CeO2. The properties of alloys such as Vickers hardness, TRS and fracture toughness increased with the increase of CeO2 additives, and then followed a decrease trend when the content of CeO2 exceeded 0.8%. Furthermore, the content of nano CeO2 greatly affected the cemented carbide and 0.4% of nano CeO2 revealed the strongest improvement on the structure and performances of WC-10Co cemented carbide.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Grain size effect on wear resistance of WC-co cemented carbides under different tribological conditions10.1016/j.jmst.2019.07.016 ↗
2. Effect of carbon addition on microstructure and properties of WC–co cemented carbides10.1016/S1005-0302(12)60140-6 ↗
3. Brazing of WC–8Co cemented carbide to steel using cu–Ni–Al alloys as filler metal: microstructures and joint mechanical behavior10.1016/j.jmst.2017.11.040 ↗
4. Effect of SiC nanowhisker addition on WC-Ni based cemented carbides fabricated by hot-press sintering10.1016/j.ijrmhm.2012.10.009 ↗
5. The role of Y2O3, Cu, Mo and Mo2C additives on optimizing the corrosion resistance of WC-6Co cemented carbide in HCl and NaOH solutions10.1016/j.jallcom.2020.154269 ↗
6. Cemented carbides with highly oriented WC grains and formation mechanisms10.1016/j.msea.2016.02.021 ↗
7. Electrochemical corrosion behaviors of straight WC-co alloys: exclusive variation in grain sizes and aggressive media10.1016/j.ijrmhm.2016.02.009 ↗
8. Influence of NbC and VC on microstructures and mechanical properties of WC–co functionally graded cemented carbides10.1016/j.matdes.2015.10.156 ↗
9. The effects of fine WC contents and temperature on the microstructure and mechanical properties of inhomogeneous WC-(fine WCCo) cemented carbides10.1016/j.ceramint.2016.08.119 ↗
10. Effect of Mo and Y2O3 additions on the microstructure and properties of fine WC-co cemented carbides fabricated by spark plasma sintering10.1016/j.ijrmhm.2017.07.010 ↗
11. Effects of Y2O3 addition on microstructures and mechanical properties of WC–co functionally graded cemented carbides10.1016/j.ijrmhm.2014.11.004 ↗
12. Tungsten carbide platelet-containing cemented carbide with yttrium containing dispersed phase10.1016/S1003-6326(08)60019-9 ↗
13. Rare earth Y, Ce and their additions to cemented carbides microstructure and properties
14. El-Kady, effect of nano-yttria addition on the properties of WC/co composites10.1016/j.matdes.2013.05.034 ↗
15. Effect of cu on the microstructures and properties of WC-6Co cemented carbides fabricated by SPS10.1016/j.ijrmhm.2016.06.007 ↗
16. Effects of Ni and cu additions on microstructures, mechanical properties and wear resistances of ultra-coarse grained WC-6Co cemented carbides10.1016/j.ijrmhm.2017.10.009 ↗
17. Influence of copper content on the microstructure and hardness of copper-doped tungsten carbide-cobalt bulk at the elevated temperature10.1016/j.ijrmhm.2013.01.010 ↗
18. Effect of cu, Ni on the property and microstructure of ultrafine WC-10Co alloys by sinter-hipping10.1016/j.ijrmhm.2011.02.012 ↗
19. Synthesis and characterization of WC-6Co nanocrystalline composite powder10.1016/S1875-5372(18)30169-3 ↗
20. Y2O3-and NbC-doped ultrafine WC–10Co alloys by low pressure sintering10.1016/j.ijrmhm.2009.12.008 ↗
21. Influence of Ce-co pre-alloyed powder addition on the microstructure and mechanical properties of Ti(C, N)-based cermet10.1016/j.ijrmhm.2012.11.008 ↗
22. Characterization and preparation of ultra-fine grained WC–co alloys with minor La-additions10.1016/j.ijrmhm.2011.12.011 ↗
23. Influencing mechanism of rare earth La on the nanocrystalline (W, Ni, Fe, La) composite powders during sintering
24. Superior corrosion resistance and self-healable epoxy coating pigmented with silanzied trianiline-intercalated graphene10.1016/j.carbon.2018.10.050 ↗
25. POSS-tetraaniline modified graphene for active corrosion protection of epoxy-based organic coating10.1016/j.cej.2019.123160 ↗
26. Improvement of anticorrosion ability of epoxy matrix in simulate marine environment by filled with superhydrophobic POSS-GO nanosheets10.1016/j.jhazmat.2018.10.040 ↗
27. An effective corrosion inhibitor of N doped carbon dots for Q235 steel in 1 M HCl solution10.1016/j.jallcom.2019.152338 ↗
28. Effects of LaB6 addition on the microstructure and mechanical properties of ultrafine grained WC–10Co alloys10.1016/j.jallcom.2010.09.202 ↗
29. Three-point bending fatigue behavior of WC-co cemented carbides10.1016/j.matdes.2012.08.075 ↗
30. An analysis on tribological performance of CrCN coatings with different carbon contents in seawater10.1016/j.triboint.2015.07.002 ↗
31. Structure, mechanical and tribological properties in seawater of multilayer TiSiN/Ni coatings prepared by cathodic arc method10.1016/j.apsusc.2019.07.140 ↗
32. Comparison of WC/C nanocomposite films in load-bearing capacity via interface micro-cracks during tribology behavior: a feasible judgment mechanism10.1016/j.ceramint.2019.08.054 ↗
33. The optimization of mechanical property and corrosion resistance of WC-6Co cemented carbide by Mo2C content10.1016/j.ceramint.2020.04.011 ↗
34. Mechanical and tribological haracteristics of tungsten cermet composites sintered with co-based and zirconia mixed binders10.1016/j.ijrmhm.2015.01.001 ↗
35. Influences of bias voltage on the microstructures and tribological performances of Cr–C–N coatings in seawater10.1016/j.surfcoat.2015.02.016 ↗
36. Doping carbon to improve the tribological performance of CrN coatings in seawater10.1016/j.triboint.2015.04.008 ↗
37. One-step synthesis of superhydrophobic polyhedral oligomeric silsesquioxane-graphene oxide and its application in anti-corrosion and anti-wear fields10.1016/j.corsci.2018.10.034 ↗
38. In situ scratch testing and abrasion simulation of WC/co10.1016/j.ijrmhm.2016.06.004 ↗
39. Simulation of abrasion to WC/co hardmetals using a micro-tribology test system10.1016/j.wear.2012.11.057 ↗
40. A new concept in liquid jet erosion: commissioning and proving trials10.1016/j.wear.2007.01.096 ↗
41. A review of micro-scale abrasion testing10.1088/0022-3727/44/7/073001 ↗
42. Abrasion and toughness property maps for WC/co hardmetals10.1179/174329007X211526 ↗