journal article·2013-01

Microstructure characterization and mechanical properties of a Laves-phase alloy based on Cr2Nb

Kewei Li, Shuangming Li, Yunlong Xue, Hengzhi Fu

Publisher page

Abstract

Abstract Microstructure and mechanical properties of a binary Cr 2 Nb-based alloy containing the Laves phase Cr 2 Nb and Cr phase have been studied in the arc-melted condition. Microstructure consisting of fully coupled eutectic was firstly observed in this hypereutectic alloy. The Cr 2 Nb primary phase experienced a faceted to nonfaceted transition as the solidification distance increased. Based on the maximum interface growth temperature criteria, the microstructure evolutions in this alloy were explained successfully by means of the competitive growth between the β-Cr 2 Nb phase and eutectic. Meanwhile, the yield strength and fracture toughness of the samples taken from the bottom of the ingot attained 1986 MPa and 4.3MPa⋅m 1/2 respectively, which were considerably enhanced over the monolithic Cr 2 Nb. The enhancements were explained in terms of the second Cr phase toughening and grain boundary toughening mechanisms. Furthermore, the variation of mechanical properties in different position of arc-melted ingot was proven to result in different eutectic fracture mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Study on scaling of mechanically alloyed and hot pressed NbCr2 Laves phase at 1200°C in air10.1016/j.ijrmhm.2007.04.005 ↗
2. Effect of Al additions on the oxidation behavior of Laves phase NbCr2 alloys at 1373K and 1473K10.1016/j.ijrmhm.2008.09.007 ↗
3. The mechanical properties and the deformation microstructures of the C15 Laves phase Cr2Nb at high temperatures10.1016/j.actamat.2006.10.048 ↗
4. Microstructure and mechanical properties of Laves-phase alloys based on Cr2Nb10.1016/0921-5093(91)90361-P ↗
5. High temperature mechanical properties of Cr2Nb-based intermetallics10.1557/JMR.1993.3069 ↗
6. Microstructure and mechanical properties of two-phase Cr–Cr2Nb, Cr–Cr2Zr and Cr–Cr2(Nb, Zr) alloys10.1016/S0921-5093(98)00981-2 ↗
7. Microstructural and crystallographic relationships in directionally solidified Nb–Cr2Nb and Cr–Cr2Nb eutectics10.1016/0956-7151(94)90228-3 ↗
8. Precipitation in a Cr–Cr2Nb alloy10.1016/S1359-6454(97)00050-5 ↗
9. Structure and composition of Laves phases in binary Cr–Nb, Cr–Zr and ternary Cr–(Nb, Zr) alloys10.1016/S0966-9795(03)00065-7 ↗
10. Cracking in Cr–Cr2Nb eutectic alloys due to thermal stresses10.1016/S0921-5093(99)00068-4 ↗
11. Phase field and room-temperature mechanical properties of C15 Laves phase in Nb–Hf–Cr and Nb–Ta–Cr alloy systems10.1016/j.jallcom.2005.11.087 ↗
12. Deformation behaviour of the C15 Laves phase Cr2Nb10.1016/S0921-5093(97)00047-6 ↗
13. The effects on fracture toughness of ductile-phase composition and morphology in Nb–Cr–Ti and Nb–Si In Situ composites10.1007/BF02663850 ↗
14. Phase and microstructure selection in peritectic alloys close to the limit of constitutional undercooling10.1016/S1359-6454(98)00336-X ↗
15. Theory of eutectic growth under rapid solidification conditions10.1016/0001-6160(87)90176-3 ↗
16. Lamellar and rod eutectic growth
17. Rapid Solidification Processing: Principles and Technology IV
18. The effect of alloying on the properties of (Nb, Ti)Cr2 C15 Laves phases10.1016/S0921-5093(01)01614-8 ↗
19. Microstructure evolution of laves phase Cr2Nb/Cr alloys prepared by arc melting
20. Kurz · 2005