Corrosion resistance of WC hardmetals with different Co and Ni-based binders
Source abstract
Abstract
In this work, industrially relevant WC composites with alternative binders (Ni, CoNi, NiCr, CoCr, CoNiCr and NiCrMo) were produced and their corrosion resistance in 0.5 M NaCl was compared to conventional WC-Co system. The main objective is to develop hardmetals with higher corrosion resistance to extend the lifetime of tools and equipment, reducing the demand for new parts and maintenance, thus decreasing the total cost of the operation. The study includes different electrochemical techniques, namely corrosion potential monitoring, Electrochemical Impedance Spectroscopy (EIS) and polarization curves. The purpose is to evaluate the influence of each element on the corrosion resistance of the composites produced.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Fundamentals and general applications of hardmetals10.1016/B978-0-08-096527-7.00002-7 ↗
2. Physical and chemical nature of cemented carbides
3. Corrosion of WC-VC-Co hardmetal in neutral chloride containing media
4. Corrosion behaviour of WC-Co based hardmetal in neutral chloride and acid sulphate media10.1002/1521-4176(200205)53:5<328::AID-MACO328>3.0.CO;2-G ↗
5. Corrosion behavior of WC–co hardmetals in the oil-in-water emulsions containing sulfate reducing Citrobacter sp10.1016/j.corsci.2015.01.036 ↗
6. Corrosion of cemented carbide grades in petrochemical slurries. Part I-electrochemical adsorption of CN¯, SCN¯ and MBT: a study based on in situ SFG10.1016/j.ijrmhm.2016.06.010 ↗
7. Influence of the microstructure on corrosion induced damage of WC-Co cemented carbides
8. Microstructural influence on tolerance to corrosion-induced damage in hardmetals10.1016/j.matdes.2016.08.066 ↗
9. Surface damage on cemented carbide rock-drill buttons10.1016/S0043-1648(01)00553-1 ↗
10. The influence of a corrosive wood-cutting environment on the mechanical properties of hardmetal tools10.1016/S0263-4368(01)00059-2 ↗
11. Anodic polarization and corrosion of cemented carbides with cobalt and nickel binders10.1007/BF01153988 ↗
12. Failure mechanism of cemented tungsten carbide dies in wet drawing process of steel cord filament10.1016/j.ijrmhm.2008.01.009 ↗
13. Corrosion-induced damage and residual strength of WC-Co, Ni cemented carbides: influence of microstructure and corrosion medium10.3390/met9091018 ↗
14. Electrochemical behaviour of tungsten-carbide hardmetals10.1016/0921-5093(95)10137-3 ↗
15. The relationship between electrochemical behaviour and in-service corrosion of WC based cemented carbides10.1016/S0263-4368(96)00014-5 ↗
16. Reduction of environmental impact in hardmetal technologies10.1016/j.mprp.2016.02.052 ↗
17. I. T. I. Association
18. Mortality among hardmetal production workers: occupational exposures10.1097/JOM.0000000000001068 ↗
19. The corrosion behaviour of WC-VC-Co hardmetals in acidic media10.1016/j.corsci.2010.05.033 ↗
20. Effect of WC grain size on the corrosion behavior of WC-Co based hardmetals in alkaline solutions10.1016/j.ijrmhm.2009.02.004 ↗
21. Influence of binder metal and surface treatment on the corrosion resistance of (W,Ti)C-based hardmetals10.1016/j.surfcoat.2006.07.135 ↗
22. Corrosion properties of Co-based cemented carbides in acidic solutions10.1016/S0263-4368(03)00027-1 ↗
23. Investigation of the electrochemical behaviour of WC–Co hardmetal with electrochemical and surface analytical methods10.1016/j.susc.2004.06.102 ↗
24. Microabrasion of WC–Co hardmetals in corrosive media10.1016/j.wear.2003.09.003 ↗
25. Model scratch corrosion studies for WC/Co hardmetals10.1016/j.wear.2010.01.004 ↗
26. Corrosion behaviour of WC hardmetals with nickel-based binders10.1016/j.corsci.2018.11.015 ↗
27. Abrasive wear resistance of WC-based composites, produced with Co or Ni-rich binders10.1016/j.wear.2021.203924 ↗
28. Impermeable sintered metal materials and hardmetals - determination of density
29. Microstructure and anodic dissolution mechanism of brazed WC–Ni composite coatings10.1179/1743278213Y.0000000124 ↗
30. Micro-abrasion–corrosion interactions of Ni–Cr/WC based coatings: approaches to construction of tribo-corrosion maps for the abrasion–corrosion synergism10.1016/j.electacta.2011.06.064 ↗
31. The anodic dissolution of a Ni-base superalloy10.5006/1.3580829 ↗
32. Microstructural characterization and corrosion resistance of WC-Ni-Cr-Mo composite – the effect of Mo10.1016/j.ijrmhm.2019.105090 ↗
33. Corrosion behaviour of WC-10% AISI 304 cemented carbides10.1016/j.corsci.2015.08.006 ↗
34. Kurlov · 2013
35. Hardness to toughness relationship of fine-grained WC-Co hardmetals10.1016/S0263-4368(98)00028-6 ↗
36. Anodic polarization and corrosion of WC-Co hardmetals containing small amounts of Cr3C2 and/or VC10.1007/BF01174495 ↗
37. Passivity and pseudopassivity of cemented carbides10.1016/j.ijrmhm.2004.11.006 ↗
38. ICP-MS, SKPFM, XPS, and microcapillary investigation of the local corrosion mechanisms of WC–Co hardmetal10.1149/1.2929822 ↗
39. Effects of Cr concentration on the microstructure and properties of WC-Ni cemented carbides10.1016/j.jmrt.2019.11.030 ↗
40. The effect of Cr content on the corrosion resistance of WC-Ni-Cr-Mo composites10.1016/j.ijrmhm.2020.105434 ↗
41. Orazem · 2017 · 395
42. The analysis of electrode impedances complicated by the presence of a constant phase element10.1016/S0022-0728(84)80324-1 ↗
43. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗