journal article·2011-05

Compressive strength, hardness and fracture toughness of Al2O3 whiskers reinforced ZTA and ATZ nanocomposites: Weibull analysis

A. Nevarez-Rascon, A. Aguilar-Elguezabal, E. Orrantia, M.H. Bocanegra-Bernal

Publisher page

Abstract

Abstract The aim of this investigation was to study the variability in compressive strength, fracture toughness and microhardness applying the well-known Weibull statistics and to be able to provide a wide spectrum of mechanical properties in Al2O3 whisker reinforced alumina toughened zirconia (ATZ) and zirconia toughened alumina (ZTA) nanocomposites for possible dental applications. Uniaxial compression tests at room temperature of samples 6.35 ± 0.03 mm in diameter and 12.50 ± 0.63 mm in length and Vickers hardness measurements on polished surfaces were carried out. The indentation fracture toughness (KIC) was derived from the average crack length. Weibull analysis was performed on the data. The ATZ2 (18.0 wt.% Al2O3 + 2.0 wt.%(w) + 80.0 wt.% ZrO2 (TZ-3Y)) nanocomposite reported the highest average compressive load of 1200 MPa, the highest value of characteristic strength, σo, of 1340 MPa with Weibull modulus of 3.25 and relatively high fracture toughness (4.7 ± 0.7 MPa m1/2), suggesting that with the wide range of mechanical properties obtained in our work, different dental applications could be offered without lead to premature failure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. A comparison of all-ceramic restorative systems, Part I
2. Restorations with extensive dentin/enamel bonded coverage. A 5-year follow-up10.1034/j.1600-0722.2001.00063.x ↗
3. In vitro mechanical test for modern dental ceramics
4. Mechanical properties of alumina–zirconia composites for ceramic abutments10.1590/S1516-14392004000400021 ↗
5. Mechanical and fracture behavior of veneer-framework composites for all-ceramic dental bridges10.1016/j.dental.2005.12.009 ↗
6. Materials design in the performance of all-ceramic crowns10.1016/j.biomaterials.2003.09.050 ↗
7. Strength and reliability of four-unit all-ceramic posterior britges10.1016/j.dental.2004.11.012 ↗
8. Development and testing of ceramic for dental applications
9. Fatigue of zirconia under cyclic loading in water and its implications for the design of dental bridges10.1016/j.dental.2005.12.008 ↗
10. Knee arthroplasty: recently developed ceramics offer new solutions10.1016/S0142-9612(01)00262-9 ↗
11. Manufacturing and properties of ZTA ceramics with nanoscaled ZrO2
12. Oxide fiber reinforced glass: a challenge to new composites10.1002/(SICI)1527-2648(200003)2:3<93::AID-ADEM93>3.0.CO;2-3 ↗
13. Fabrication and mechanical properties of ZrB2–SiCw ceramic matrix composite10.1016/j.matlet.2007.07.044 ↗
14. Crack-healing behavior of zirconium diboride composite reinforced with silicon carbide whiskers10.1016/j.scriptamat.2008.08.013 ↗
15. Mirostructure and properties of silicon carbide whisker reinforced diboride ultra-high temperature ceramics10.1016/j.solidstatesciences.2008.05.010 ↗
16. Ceramic whisker reinforcement of dental resin composites10.1177/00220345990780021101 ↗
17. High toughness ceramics
18. Toughening behavior in ceramics associated with the deformation of tetragonal zirconia10.1016/0001-6160(86)90246-4 ↗
19. Some considerations of evaluation of interfacial frictional stress from the indentation technique for fibre-reinforced ceramic composites10.1007/BF01730461 ↗
20. Crack growth resistance of alumina, zirconia and zirconia toughened alumina ceramics for joint prostheses10.1016/S0142-9612(01)00206-X ↗
21. In situ observations of stress-induced phase transformation in ZrO2 containing ceramics
22. Piezo-spectroscopic analysis of the residual stress in zirconia-toughened alumina ceramics: the influence of the tetragonal-to-monoclinic transformation10.1016/S0921-5093(99)00383-4 ↗
23. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics10.1016/j.dental.2003.05.002 ↗
24. Mechanical properties of commercial high strength ceramic core materials10.1016/S0109-5641(03)00093-9 ↗
25. New nano-sized Al2O3–BN coating 3Y-TZP ceramic composite for CAD/CAM-produced all-ceramic dental restorations Part I. Fabrication of powders10.1016/j.nano.2008.10.004 ↗
26. Ceramic steel?10.1038/258703a0 ↗
27. A practical and systematic review of Weibull statistics for reporting strengths of dental materials10.1016/j.dental.2009.09.006 ↗
28. Weibull analysis of ceramics under high stress gradients10.1016/S0955-2219(03)00024-4 ↗
29. Reliability and compressive fracture strength of Mg–Zn–Ca bula metallic glasses: flaw sensivity and Weibull statistics10.1016/j.scriptamat.2007.10.052 ↗
30. Fracture statistics of ceramics — Weibull statistics and deviations from Weibull statistics10.1016/j.engfracmech.2006.05.028 ↗
31. A statistical theory of strength of materials
32. Weibull WA. A statistical distribution function of wide applicability. 1951;18:293–9710.1115/1.4010337 ↗
33. Statistical properties of Weibull stimators10.1007/BF02402669 ↗
34. Improved linear regression method for estimating Weibull parameters10.1016/j.tafmec.2009.09.007 ↗
35. Mechanical properties of In-Ceram alumina and In-Ceram zirconia
36. Structural reliability of alumina-, feldspar-, leucite-, mica-, and zirconia-based ceramics10.1016/S0300-5712(00)00030-0 ↗
37. Weibull analysis and flexural strength of hot-pressed core and veneered ceramic structures10.1016/S0109-5641(03)00010-1 ↗
38. Estimator type and population size for estimating the Weibull modulus in ceramics10.1016/S0955-2219(97)00165-9 ↗
39. Fracture of engineering brittle materials
40. On estimating the Weibull modulus for a brittle material10.1007/BF00561290 ↗
41. On the estimation of the Weibull modulus
42. Statistical distributions of fracture strengths of cast Al–7Si–Mg Alloy10.1016/0921-5093(93)90226-5 ↗
43. Statistical analysis of fracture toughness of soda-lime glass determined by indentation10.1016/S0022-3093(00)00418-X ↗
44. Clinical failure of dental ceramic structures: insights from combined fractography, in vitro testing and finite element analysis
45. Ceramics in restorative and prosthetic dentistry10.1146/annurev.matsci.27.1.443 ↗
46. ASTM C 1424-99, Standard Test Method for Compressive Strength of Advanced Ceramics at Ambient Temperature ics, 1999
47. ASTM C 1327-99, Standard Test Method for Vickers indentation hardness of advanced ceramics, 1999
48. Fracture toughness determinations by indentation10.1111/j.1151-2916.1976.tb10991.x ↗
49. A novel processing route for whisker shaped mullite–alumina composites from kaolin
50. Fracture toughness (KIC), hardness, sintering and grain growth behaviour of YSCZ/Al2O3 composites produced by colloidal processing10.1016/j.jallcom.2004.08.084 ↗
51. Whisker toughening of ceramics: toughening mechanisms, fabrication and composite properties10.1146/annurev.ms.24.080194.000503 ↗
52. Spark plasma sintering of magnesia-doped alumina with high hardness and fracture toughness10.1111/j.1551-2916.2007.02094.x ↗
53. Al2O3(w)–Al2O3(n)–ZrO2 (TZ-3Y)n multi-scale nanocomposite: an alternative for different dental applications?10.1016/j.actbio.2009.06.029 ↗
54. Effect of whisker aspect ratio on the density and fracture toughness of SiC whisker-reinforced Si3N410.1023/A:1017998503025 ↗
55. 1061 Toughening behavior of whisker-reinforced ceramic matrix composites10.1111/j.1151-2916.1988.tb05791.x ↗
56. Statistical distributions
57. On evaluation Weibull fits to mechanical testing data10.1016/j.msea.2009.08.014 ↗
58. Fracture statistics: a comparison of the normal Weibull and type I extreme value distributions10.1063/1.331731 ↗
59. http://www.sv.vt.edu/classes/MSE2094_NoteBook/97ClassProj/exper/mcmurtry/www/matt.html, accessed on May 03 2010-05-20
60. The flexural properties of endodontic post materials10.1016/j.dental.2010.03.017 ↗
61. The influence of alumina abrasion and cement lute on the strength of a porcelain laminate veneering material10.1016/j.jdent.2003.08.004 ↗
62. Analysis of tensile bond strengths using Weibull statistics10.1016/j.biomaterials.2004.01.060 ↗
63. A statistical approach to the mechanical testing of dental materials10.1016/S0109-5641(86)80021-5 ↗