Abnormal grain growth in cemented carbides — Experiments and simulations
Source abstract
Abstract
The grain size and the grain size distribution are two of the most important factors when tailoring the mechanical properties of cemented carbides. In the present work the effect on the growth behavior when adding some abnormal grains in an initial fine grained powder is studied. It is clearly seen that abnormal grains in a fine grained matrix lead to faster grain growth and a higher average grain size.
Source: openaire · Quality: candidate unverified · Source record ↗
References (10)
Show source-provided references
1. The kinetics of precipitation from supersaturated solid solutions10.1016/0022-3697(61)90054-3 ↗
2. Theorie der aeterung von niederschlägen durch umlösen
3. Carbide grain growth in cemented carbides10.1016/j.actamat.2010.11.056 ↗
4. Analysis of WC grain growth during sintering using electron backscatter diffraction and image analysis10.1016/j.ijrmhm.2007.10.004 ↗
5. Comparison of EBSD and conventional methods of grain size measurements of hardmetals10.1016/j.ijrmhm.2008.06.009 ↗
6. Weidow J. Effect of metal and cubic carbide additions on interface chemistry, phase composition and grain growth in WC-Co based cemented carbides. PhD Thesis. Department of Applied Physics, Chalmers University of Technology, Gothenburg, Sweden; 2010.10.1016/j.scriptamat.2010.08.025 ↗
7. Thermo-calc and DICTRA, computational tools for material science
8. CCC1 · 2005 · 48 · 28
9. Inverse saltykov analysis for particle-size distributions and their time evolution10.1016/j.actamat.2010.09.046 ↗
10. Abnormal growth of faceted (WC) grains in a (Co) liquid matrix10.1007/BF02652373 ↗