Wear and thermal stability of nano-TiB2 modified TiCN-WC-Co-Cr3C2 cermet
Source abstract
Abstract
Abstract This work discusses the friction, wear and thermal response of TiCN-WC-Co-Cr3C2 cermet modified by the addition of TiB2 nanoparticles. The specimens were prepared by spark plasma sintering by adding different weight percentages (5, 10 and 15) of TiB2 nanoparticles in TiCN-WC-Co-Cr3C2 cermets. The sintered pieces were subjected to sliding wear under an unlubricated condition and a constant load of 20 N at sliding velocities of 0.23 m/s, 0.35 m/s and 0.47 m/s against a steel disc of 48 mm diameter. Friction was the maximum at a sliding velocity of 0.23 m/s. The wear loss decreased with increasing speed of sliding and was between 10−5 to 10−6 mm3. The wear rates and coefficient of friction were highly dependent on microstructure and mechanical properties of the cermets. Abrasion and adhesion were the active modes of wear. Heating of the samples was carried out at 600 °C, 800 °C and 1000 °C for 4 h. A substantial mass gain and decrease in hardness were observed in the specimen annealed at 1000 °C, for which Scanning Electron Microscopy revealed considerable grain growth and XRD showed oxide phases. A cermet containing 15% TiB2 nanoparticles displayed the lowest volumetric wear at room temperature, but had rather low thermal stability. Response surface methodology was used to develop models and regression equations for wear and thermal stability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Sliding wear of ceramics and cermets against steel10.1016/S0955-2219(03)00297-8 ↗
2. Ti(C, N) cermets: metallurgy and properties10.1016/0263-4368(95)00027-G ↗
3. Microstructure and mechanical properties of Ti (C, N) based cermets reinforced with different ceramic particles processed by spark plasma sintering10.1016/j.ceramint.2017.05.103 ↗
4. Tribological behavior of TiCN-based cermets at elevated temperatures10.1016/j.msea.2005.11.022 ↗
5. Effect of multi walled carbon nanotube addition on the microstructure and mechanical properties of Ti(C, N)-based cermets10.1007/s40145-017-0256-y ↗
6. Effect of SiC nano-whisker addition on TiCN-based cermets prepared by spark plasma sintering10.1016/j.ijrmhm.2012.03.008 ↗
7. Mechanical properties and microstructure of Ti(C, N)-based cermets reinforced by nano-Si3N4 particles10.1016/j.ijrmhm.2010.09.010 ↗
8. Mechanical properties and microstructures of TiCN/nano-TiB2/TiN cermets prepared by spark plasma sintering10.1016/j.ceramint.2018.02.154 ↗
9. Influence of hot pressing temperature and time on microstructure and mechanical properties of TiB2 ceramics10.1016/S0955-2219(01)00424-1 ↗
10. Effect of various carbides on the dissolution behavior of Ti (C0.7 N0.3) in a Ti(C0.7 N0.3)-30 Ni system10.1016/S0263-4368(01)00044-0 ↗
11. Effect of WC and group IV carbides on the cutting performance of Ti(C,N) cermet tools10.1016/j.ijmachtools.2003.10.023 ↗
12. Oxidation and tribological behaviour of an Fe-based MMC reinforced with TiCN particles10.1016/j.ijrmhm.2008.10.012 ↗
13. Oxidation of WC-Co, WC-Ni, and WC-Co-Ni hard metals in the temperature range 500-800 C10.1016/0263-4368(96)00009-1 ↗
14. Establishing empirical relationships to predict grain size and tensile strength of friction stir welded AA 6061-T6 aluminium alloy joints10.1016/S1003-6326(09)60387-3 ↗
15. Chawla · 1998
16. Numerical modeling, prediction of Cu–W nano powder composite in dry sliding wear condition using response surface methodology10.1016/j.matdes.2013.03.072 ↗
17. Industrial applications of superhard nanocomposite coatings10.1016/j.surfcoat.2008.05.038 ↗
18. Effect of Co3O4 doping on nonlinear coefficient in Zn-Bi-Ti-O Varistor ceramics10.4028/www.scientific.net/AMR.1107.20 ↗
19. Enhanced oxidation resistance of Ti(C, N)-based cermets containing Ta10.1016/j.corsci.2014.03.007 ↗
20. Oxidation behavior of titanium carbonitride based materials10.1016/S0010-938X(01)00142-1 ↗
21. A Systematic Methodology for Design of Experiments
22. The O−Ti (Oxygen-Titanium) system10.1007/BF02873201 ↗