Schmid factor analysis for chip flow induced plastic deformation of textured cubic carbonitride coatings
Source abstract
Abstract
In high-speed metal machining, cutting tools in the form of cemented carbide inserts coated with thin wear-resistant coatings are commonly used. These coatings are often made of metal carbonitrides with cubic rock salt crystal structure and different growth textures. However, the influence of the crystallographic texture of the coatings on their wear by plastic deformation due to the chip flow during machining needs to be revealed further. In this work, in order to analyse the ability of polycrystalline fibre-textured coatings with a rock salt structure to undergo plastic deformation, a method was developed for calculating Schmid factors of such textured coatings as a function of the loading angle of an external force. The Schmid factors were calculated for coatings with 100 and 211 growth textures, and {100} <110>, {110}<110> and {111}<110> as possible slip systems. For the {111}<110> slip systems, the Schmid factors are not much influenced by the force angle and coating texture, which is contrary to the {100}<110> and {110}<110> slip systems. The simulations were compared to wear on the rake face of two textured Ti(C,N) coatings after short longitudinal turning tests. The variation of the degree of plastic deformation of Ti(C,N) coatings with growth texture and external force angle indicates that the dominant activated slip systems are {110}<110> using the machining conditions applied in this work.
Source: expertdata · Quality: candidate unverified · Source record ↗
References (47)
Show source-provided references
1. The history of the technological progress of hardmetals10.1016/j.ijrmhm.2013.07.014 ↗
2. Cemented carbide microstructures: a review10.1016/j.ijrmhm.2018.12.004 ↗
3. Novel aluminum-rich Ti1−xAlxN coatings by LPCVD10.1016/j.surfcoat.2008.04.098 ↗
4. Influence of process conditions on the growth and texture of CVD alpha-alumina10.3390/coatings10020158 ↗
5. TiN hard coatings deposited on high-speed steel substrates by reactive direct current magnetron sputtering10.1116/1.574949 ↗
6. Mechanical and structural properties of TiC and TiCN thin films grown by RF sputtering10.1557/PROC-778-U6.13 ↗
7. Microstructure and wear mechanisms of texture-controlled CVD α-Al2O3 coatings10.1016/j.wear.2017.01.071 ↗
8. Enhanced performance of α-Al2O3 coatings by control of crystal orientation10.1016/j.surfcoat.2008.03.021 ↗
9. Calculated and experimental Schmid factors for chip flow deformation of textured CVD α-alumina coatings10.1016/j.surfcoat.2021.126991 ↗
10. Epitaxy in multilayer coatings of κ-Al2O310.1016/0257-8972(95)02690-8 ↗
11. Deposition, microstructure and properties of texture-controlled CVD α-Al2O3 coatings10.1016/j.ijrmhm.2005.05.004 ↗
12. CVD TiAlN coatings with tunable nanolamella architectures10.1016/j.surfcoat.2021.127076 ↗
13. Effects of gas flow on detailed microstructure inhomogeneities in LPCVD TiAlN nanolamella coatings10.1016/j.mtla.2019.100546 ↗
14. Atom probe tomography investigation of 3D nanoscale compositional variations in CVD TiAlN nanolamella coatings10.1016/j.surfcoat.2021.127741 ↗
15. On the growth, orientation and hardness of chemical vapor deposited Ti(C,N)10.1016/j.tsf.2017.10.037 ↗
16. Kinetics of the low-pressure chemical vapor deposited tungsten nitride process using tungsten hexafluoride and ammonia precursors10.1116/6.0001093 ↗
17. Vacancy-dependent stability of cubic and wurtzite Ti1−xAlxN10.1016/j.surfcoat.2015.05.017 ↗
18. Al-rich cubic Al0.8Ti0.2N coating with self-organized nano-lamellar microstructure: thermal and mechanical properties10.1016/j.surfcoat.2016.02.027 ↗
19. Chemical vapor deposition of TiN on a CoCrFeNi multi-principal element alloy substrate10.1016/j.surfcoat.2020.125778 ↗
20. Crater wear mechanism of TiAlN coatings during high-speed metal turning
21. Plastic deformation and residual stress in high speed turning of AD730TM nickel-based Superalloy with PCBN and WC tools10.1016/j.procir.2018.05.051 ↗
22. Mechanical properties and machining performance of Ti1−xAlxN-coated cutting tools10.1016/j.surfcoat.2004.04.056 ↗
23. Impact of nitrogen vacancies on the high temperature behavior of (Ti1−xAlx)Ny alloys10.1016/j.actamat.2016.08.024 ↗
24. Tribological properties of highly oriented Ti(C,N) deposited by chemical vapor deposition10.1016/j.triboint.2017.11.040 ↗
25. Determination of the thermal expansion of κ-Al2O3 by high temperature XRD10.1016/0257-8972(95)02558-8 ↗
26. Surface properties of metastable alumina: a comparative study of κ - and α -Al2O310.1103/PhysRevB.67.195412 ↗
27. Theoretical structure determination of a complex material: κ-Al2O310.1111/j.1151-2916.1999.tb01926.x ↗
28. Dense fully 111-textured TiN diffusion barriers: enhanced lifetime through microstructure control during layer growth10.1063/1.371271 ↗
29. Growth model for high-Al containing CVD TiAlN coatings on cemented carbides using intermediate layers of TiN10.1016/j.surfcoat.2021.127361 ↗
30. Diffraction stress analysis in fiber-textured TiN thin films grown by ion-beam sputtering:application to (001) and mixed (001)+(111) texture10.1063/1.1646444 ↗
31. Quantification of dislocation nucleation stress in TiN through high-resolution in situ indentation experiments and first principles calculations10.1038/srep15813 ↗
32. Understanding dislocation slip in stoichiometric rocksalt transition metal carbides and nitrides10.1007/s10853-017-0857-4 ↗
33. The micro-Vickers hardness of TiC single crystals up to 1500° C10.1007/BF00540285 ↗
34. The preparation and characteristics of ZrC and TaC single crystals using an r.f. floating-zone process10.1007/BF02402865 ↗
35. Plastic flow and fracture of tantalum carbide and hafnium carbide at low temperatures10.1007/BF00552039 ↗
36. Slip systems and dislocation emission from crack tips in single crystal TiC at low temperatures10.1016/1359-6454(95)00360-6 ↗
37. Deformation behaviour of single crystals of titanium carbide10.1007/BF00688420 ↗
38. Plasticity and creep in single crystals of zirconium carbide10.1111/j.1151-2916.1969.tb16067.x ↗
39. Supertoughening in B1 transition metal nitride alloys by increased valence electron concentration10.1016/j.actamat.2010.12.013 ↗
40. Computer modelling of slip in TiC10.1080/01418619908210326 ↗
41. Texture analysis with MTEX – free and open source software toolbox10.4028/www.scientific.net/SSP.160.63 ↗
42. Schmid · 1968
43. Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B10.1016/j.ijplas.2004.05.018 ↗
44. First-principles investigation on slip systems and twinnability of TiC10.1016/j.commatsci.2016.09.028 ↗
45. Influence of temperature, strain rate, surface condition, and composition on the plasticity of transition-metal carbide crystals10.1063/1.1713614 ↗
46. Core structure and Peierls stress of edge and screw dislocations in TiN: a density functional theory study10.1016/j.actamat.2014.04.047 ↗
47. The size of a dislocation10.1088/0959-5309/52/1/305 ↗