An inorganic–organic hybrid precursor strategy for the synthesis of zirconium diboride powders
Source abstract
Abstract
Abstract An inorganic–organic hybrid precursor strategy was used to synthesize zirconium diboride. Firstly, a zirconium-containing polymer was synthesized by condensation polymerization of zirconium oxychloride, salicyl alcohol and acetylacetone in the presence of triethylamine at room temperature. And then the hybrid precursor was prepared via blending the zirconium-containing polymer and boric acid in solution. Finally, zirconium diboride powders were obtained by pyrolyzing the hybrid precursor at high temperature. The zirconium-containing polymer was characterized by FTIR, NMR and GPC. The pyrolysis behavior of the precursor was also investigated by XRD and SEM. It was found that the zirconium-containing polymer is composed of Zr O Zr as the main chain and the ligands (salicyl alcohol and acetylacetone) as the side chain. It exhibits excellent solubility, and can be blended with boric acid in solution to form a hybrid precursor. Pyrolyzing the precursor above 1300°C can produce zirconium diboride powders.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Microstructure and ablation properties of zirconium carbide doped carbon/carbon composites10.1016/j.carbon.2009.09.035 ↗
2. Improved ablation resistance of C-C composites using zirconium diboride and boron carbide10.1016/j.jeurceramsoc.2010.02.025 ↗
3. Reaction kinetics and ablation properties of C/CZrC composites fabricated by reactive melt infiltration10.1016/j.ceramint.2010.12.002 ↗
4. The effect of zirconium carbide on ablation of carbon/carbon composites under an oxyacetylene flame10.1016/j.corsci.2010.09.028 ↗
5. Preparation and characterization of C/SiCZrB2 composites by precursor infiltration and pyrolysis process10.1016/j.ceramint.2009.11.015 ↗
6. Microstructure observation and analysis of 3D carbon fiber reinforced SiC-based composites fabricated through filler enhanced polymer infiltration and pyrolysis10.1016/j.ceramint.2011.07.039 ↗
7. Microstructural characterization on ZrC doped carbon/carbon composites10.1016/j.ceramint.2011.08.002 ↗
8. Preparation and characterization of three-dimensional carbon fiber reinforced zirconium carbide composite by precursor infiltration and pyrolysis process10.1016/j.ceramint.2011.02.024 ↗
9. Synthesis of ultrafine ZrB2 powders by sol–gel process10.1007/s11706-010-0094-0 ↗
10. Synthesis of ZrB2 nanoparticles by sol–gel method10.1007/s10971-011-2430-y ↗
11. Morphologyevolutionof ZrB2 nanoparticlessynthesized by sol–gel method10.1016/j.jssc.2011.05.040 ↗
12. New route to synthesize ultra-Fine zirconium diboride powders using inorganic–organic hybrid precursors10.1111/j.1551-2916.2006.01269.x ↗
13. Solution-Based Synthesis of Submicrometer ZrB2 and ZrB2TaB210.1111/j.1551-2916.2008.02288.x ↗
14. Polymeric precursors to refractory metal borides10.1023/B:JMSC.0000041701.01103.41 ↗
15. Preparation of continuous zirconia fibres from polyzirconoxane synthesized by the facile one-pot reaction10.1023/A:1004357405815 ↗
16. Preparation of zirconia xerogels and ceramics by sol–gel method and the analysis of their thermal behavior10.1016/S0040-6031(01)00536-6 ↗
17. Preparation of polyzirconoxane from zirconium oxychloride octahydrate and ethylene glycol as a precursor for zirconia ceramics10.1002/(SICI)1099-0739(200002)14:2<119::AID-AOC964>3.0.CO;2-Y ↗
18. Synthesis and characterization of SiZrCO ceramics from polymer precursors10.1016/0955-2219(91)90089-I ↗
19. Synthesis of polymeric titanium and zirconium precursors and preparation of carbide fibres and films10.1023/A:1004428818457 ↗
20. Corrosion protection of AA 2024-T3 aluminium alloys using 3, 4-diaminobenzoic acid chelated zirconium-silane hybrid sol–gels10.1016/j.tsf.2010.05.088 ↗
21. The role of complexing ligands in the formation of non-aggregated nanoparticles of zirconia10.1007/BF00486166 ↗
22. On the synthesis and crystallization process of nanocrystalline PZT powders obtained by a hybrid sol–gel alkoxides route10.1016/j.jallcom.2006.10.143 ↗
23. Synthesis and characterization of pure cubic zirconium oxide nanocrystals by decomposition of bis-aqua, tris-acetylacetonato zirconium(IV) nitrate as new precursor complex10.1016/j.ica.2009.05.036 ↗
24. Synthesis and properties of benzanthrone derivatives as luminophore dyes for liquid crystals10.1016/S0143-7208(97)00050-8 ↗
25. Structure of a boron-containing bisphenol-F formaldehyde resin and kinetics of its thermal degradation10.1016/S0141-3910(03)00225-8 ↗
26. Thermal stability of boron-containing phenol formaldehyde resin10.1016/S0141-3910(98)00056-1 ↗
27. Thermal treatment of rice bran by portion-wise addition in the presence of an organo-iron catalyst10.1007/s10163-012-0049-x ↗
28. DFT modeling, UV–vis and IR spectroscopic study of acetylacetone-modified zirconia sol–gel materials10.1007/s00894-011-1257-3 ↗
29. Enzymatic synthesis of two salicin analogues by reaction of salicyl alcohol with Bacillus macerans cyclomaltodextrin glucanyltransferase and Leuconostoc mesenteroides B-742CB dextransucrase10.1016/j.carres.2004.03.018 ↗
30. New metal alkoxides: synthesis and hydrolysis-condensation reactions; some adsorption features of the hydrolysis-condensation products10.1023/A:1004701105573 ↗
31. Synthesis and characterization of titanium and zirconium complexes with silicone-bridged phenoxycyclopentadienyl ligands10.1016/j.jorganchem.2007.06.006 ↗
32. Formation and structural properties of salicylaldiminato complexes of zirconium and titanium10.1016/S0020-1693(99)00573-3 ↗
33. The mechanism of asymmetric reduction catalyzed by a C2 symmetric bis-amino alcohol catalyst10.1007/BF03028848 ↗
34. The ZrB2 volatility diagram10.1111/j.1551-2916.2005.00599.x ↗