Effect of Nb low-alloying on the microstructure, corrosion and wear performance of a Co-28Cr-6Mo alloy fabricated by Vacuum Arc Melting
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Biomedical alloys and physical surface modifications: a mini-review10.3390/ma15010066 ↗
2. Toxicological risks of the cobalt–chromium alloys in dentistry: a systematic review10.3390/ma15175801 ↗
3. Effect of processing parameters on the microstructure and mechanical properties of Co–Cr–Mo alloy fabricated by selective laser melting10.1016/j.msea.2020.139456 ↗
4. Microstructural, mechanical, ionic release and tarnish resistance characterization of porcelain fused to metal Co–Cr alloys manufactured via casting and three different CAD/CAM techniques10.1016/j.jpor.2018.10.008 ↗
5. Analysis of microstructure evolution of Co-Cr-Mo alloy during isothermal forging10.3390/met13091583 ↗
6. Heat treatment of laser powder-bed-fused Co–28Cr–6Mo alloy to remove its microstructural instability by massive FCC→HCP transformation
7. Micromechanical, corrosion and wet sliding wear behaviours of Co-28Cr-6Mo alloy: Wrought vs. LPBF
8. Comparative study of the microstructures and mechanical properties of laser metal deposited and vacuum arc melted refractory NbMoTa medium entropy alloy10.1016/j.ijrmhm.2020.105195 ↗
9. Comparison of microstructures and mechanical properties of 3 cobalt-chromium alloys fabricated with soft metal milling technology10.1016/j.prosdent.2020.07.037 ↗
10. Simulating porcelain firing effect on the microstructure, corrosion and mechanical properties of Co-Cr-Mo dental alloy fabricated by soft milling10.1007/s10266-023-00849-2 ↗
11. Microstructural, mechanical, and tribological characterization of selective laser melted CoCrMo alloy under different heat treatment conditions and hot isostatic pressing10.1002/adem.202100928 ↗
12. Al-Co alloys prepared by Vacuum Arc Melting: correlating microstructure evolution and aqueous corrosion behavior with Co content10.3390/met6030046 ↗
13. Microstructure, mechanical properties, and strain rate sensitivity of vacuum arc melted CoCrNi medium entropy alloy
14. Effects of Ni and Mo on the microstructure and some other properties of Co–Cr dental alloys10.1016/j.jallcom.2003.07.004 ↗
15. The microstructure, mechanical compression, and electrochemical behaviour of novel equiatomic CoCrMoNiW and Co-rich Co50Cr12.5Mo12.5Ni12.5W12.5 high-entropy alloys fabricated by vacuum arc remelting10.1016/j.ijrmhm.2024.106576 ↗
16. Research progress of titanium-based high entropy alloy: methods, properties, and applications10.3389/fbioe.2020.603522 ↗
17. Thermodynamic parameters, microstructure, and electrochemical properties of equiatomic TiMoVWCr and TiMoVNbZr high-entropy alloys prepared by vacuum arc remelting10.1016/j.ijrmhm.2021.105595 ↗
18. Ong · 2014 · 281
19. Corrosion of metallic biomaterials: a review10.3390/ma12030407 ↗
20. Cobalt-based alloys for orthopaedic applications studied by electrochemical and XPS analysis10.1023/B:JMSM.0000030204.08616.3d ↗
21. Electrochemical characterization of some cobalt base alloys in Ringer solution10.1016/j.matchemphys.2020.124164 ↗
22. Electrochemical behavior of CoCrMo alloy in the active state in acidic and alkaline buffered solutions10.1149/1.1595660 ↗
23. Influence of microstructure on corrosion behavior of biomedical Co-Cr-Mo-W alloy fabricated by selective laser melting10.1016/j.corsci.2020.108688 ↗
24. Cobalt-chromium alloys in dentistry: an evaluation of metal ion release10.1016/j.prosdent.2015.03.002 ↗
25. A comparative analysis of the corrosive effect of artificial saliva of variable pH on DMLS and cast Co-Cr-Mo dental alloy10.3390/ma7096486 ↗
26. Corrosion properties of low carbon CoCrMo and additively manufactured CoCr alloys for dental applications10.1016/j.dental.2022.06.021 ↗
27. Surface properties and corrosion behavior of Co–Cr alloy fabricated with selective laser melting technique10.1007/s12013-013-9593-9 ↗
28. Study of the electrochemical behaviour of SLM and traditional CoCrMo alloys in simulated body fluids
29. Single asperity sub-nano to nanoscale wear and tribocorrosion of wrought CoCrMo and additively manufactured CoCrMoW alloys10.1016/j.triboint.2022.107770 ↗
30. Cobalt–chromium alloys fabricated with four different techniques: ion release, toxicity of released elements and surface roughness10.1016/j.dental.2020.08.012 ↗
31. Study of mechanical characteristics of additively manufactured Co-Cr-Mo-2/4/6Ti alloys for knee implant material10.1016/j.jmrt.2022.09.033 ↗
32. Cobalt-based orthopaedic alloys: relationship between forming route, microstructure and tribological performance10.1016/j.msec.2012.03.012 ↗
33. Surface modification of Co–Cr–Mo implant alloy by laser interference lithography10.1016/j.triboint.2016.01.039 ↗
34. Mechanisms of adverse local tissue reactions to hip implants10.3389/fbioe.2019.00176 ↗
35. Release of metal ions from nano CoCrMo wear debris generated from tribo-corrosion processes in artificial hip implants10.1016/j.jmbbm.2017.01.041 ↗
36. The effect of nano- and micron-sized particles of cobalt–chromium alloy on human fibroblasts in vitro10.1016/j.biomaterials.2007.02.034 ↗
37. Sliding wear performances of 316 L, Ti6Al4V, and CoCrMo alloys10.4149/km_2013_3_183 ↗
38. Wear resistance and biocompatibility of Co-Cr dental alloys fabricated with cast and SLM techniques10.3390/ma15093263 ↗
39. Influence of microstructure of HC CoCrMo biomedical alloys on the corrosion and wear behaviour in simulated body fluids10.1016/j.triboint.2010.10.033 ↗
40. Characterization of wear particles generated from CoCrMo alloy under sliding wear conditions10.1016/j.wear.2010.12.045 ↗
41. Effects of microstructures on the sliding behavior of hot-pressed CoCrMo alloys10.1016/j.wear.2014.07.022 ↗
42. Microstructural effects on the wear behavior of a biomedical as-cast Co-27Cr-5Mo-0.25C alloy exposed to pulsed laser melting10.1002/jbm.a.34864 ↗
43. Ti based biomaterials, the ultimate choice for orthopaedic implants- a review10.1016/j.pmatsci.2008.06.004 ↗
44. The effect of niobium on the corrosion resistance of nickel-base alloys, niobium for high temperature applications
45. The role of niobium in wrought precipitation-hardened nickel-base alloys
46. Vanadium, niobium, and tantalum10.1002/0471435139.tox037.pub2 ↗
47. Effects of Nb and Mo alloying elements on the corrosion characteristics of sintered cobalt-chromium alloys in Hank solution for biomedical application
48. New Co-Cr-Mo-Nb-Cu alloy for implant applications: properties
49. The effect of Nb content on microstructure and properties of laser cladding 316L SS coating10.1016/j.surfcoat.2021.127684 ↗
50. Electrochemical comparison and biological performance of a new CoCrNbMoZr alloy with commercial CoCrMo alloy10.1016/j.msec.2015.10.031 ↗
51. Influence of alloying elements on the mechanical properties of a cobalt-based alloy produced with powder metallurgy
52. High-temperature wear behavior of CoCr matrix coatings reinforced by niobium element from room temperature to 1000 °C10.1115/1.4054591 ↗
53. Friction and wear behavior of niobium alloyed medium chromium wear-resistant cast steel
54. Méthode d’analyse quantitative des variétés allotropiques du cobalt pre les Rayons X10.1051/metal/195047020139 ↗
55. An in-situ gelling system for bone regeneration of osteochondral defects10.1016/j.eurpolymj.2015.02.043 ↗
56. Cyclic polarization of corrugated austenitic stainless steel rebars in acid rain: effect of fly ash, pH and steel type10.3390/cmd3010005 ↗
57. Corrosion and wear of coatings fabricated by HVOF-spraying of nanostructured and conventional WC–10Co-4Cr powders on Al7075-T610.1016/j.ijrmhm.2023.106164 ↗
58. Sliding wear performance of Al–Co alloys fabricated by vacuum arc melting and correlation with their microstructure10.1016/j.matchemphys.2021.125411 ↗
59. CoCrMo-base alloys for dental applications obtained by selective laser melting (SLM) and CAD/CAM milling
60. A study on tribological properties of textured Co-Cr-Mo alloy for artificial hip joints10.1016/j.ijrmhm.2020.105463 ↗
61. Analysis of microstructure and sliding wear behavior of Co1.5CrFeNi1.5Ti0.5 high-entropy alloy10.1007/s11665-018-3374-y ↗
62. Effect of heat-treatment temperature on microstructures and mechanical properties of Co–Cr–Mo alloys fabricated by selective laser melting10.1016/j.msea.2018.04.048 ↗
63. Microstructural evolution during isothermal aging and strain-induced transformation followed by isothermal aging in Co–Cr–Mo-C alloy: a comparative study10.1016/j.msea.2010.03.018 ↗
64. Determination of residual stress on TIG-treated surface via nanoindentation technique in Co–Cr–Mo-C alloy10.1016/j.surfcoat.2019.125020 ↗
65. Influence of heat-treatment cycles on the microstructure, mechanical properties, and corrosion resistance of Co-Cr dental alloys fabricated by selective laser melting10.1007/s11665-021-05738-9 ↗
66. Understanding the effect of refractory metal chemistry on the stacking fault energy and mechanical property of Cantor-based multi-principal element alloys10.1016/j.ijplas.2024.104020 ↗
67. Microstructure evolution, martensite transformation and mechanical properties of heat treated Co-Cr-Mo-W alloys by selective laser melting10.1016/j.ijrmhm.2023.106170 ↗
68. J. Phys. Chem. Ref. Data Monogr. · 1998 · 9
69. High-temperature phase stability and phase transformations of Niobium-Chromium Laves phase: experimental and first-principles calculation10.1016/j.matdes.2024.113373 ↗
70. The Co-Cr-Nb (cobalt-chromium-niobium) system
71. Thermodynamic assessment of the Co-Cr-Nb system10.1007/s11669-021-00875-z ↗
72. Site occupation reversal in the C14 Laves phase Nb(Cr1-xCox)210.1002/zaac.200801411 ↗
73. Consequences of crystal structure differences between C14, C15, and C36 Laves phase polytypes for their coexistence in transition-metal-based systems10.1557/opl.2011.211 ↗
74. A thermodynamic evaluation of the C–Cr–Nb system
75. The thermodynamics of multicomponent high-entropy materials10.1007/s10853-024-10385-1 ↗
76. From simple binary to complex multicomponent eutectic alloys10.1016/j.pmatsci.2021.100779 ↗
77. Solidification and segregation behaviors of superalloy IN718 at a slow cooling rate10.3390/ma11122398 ↗
78. Element segregation and solidification behavior of a Nb, Ti, Al Co-strengthened superalloy ЭК15110.1007/s40195-019-00894-3 ↗
79. Co–Cr–Mo alloy fabricated by laser powder bed fusion process: grain structure, defect formation, and mechanical properties10.1007/s00170-021-07570-w ↗
80. A review on manufacturing processes of cobalt-chromium alloy implants and its impact on corrosion resistance and biocompatibility10.1002/jbm.b.35431 ↗
81. Scratch and wear behaviour of Co-Cr-Mo alloy in Ringer’s lactate solution10.3390/ma16072923 ↗
82. Primary microstructure, microsegregation and precipitates characterization of an as-cast new type γ-γ΄ Co-Al-Mo-Nb cobalt based superalloy10.1016/j.jallcom.2018.03.397 ↗
83. Evolution of microsegregation-induced precipitations and bending fracture mechanisms of 9% Ni steel weldments filled with nickel-based alloys10.1016/j.jmrt.2023.07.178 ↗
84. Elemental mapping and quantitative characterization of dendrite structure in IN718 superalloy based on micro beam X-ray fluorescence and EPMA10.1016/j.vacuum.2021.110859 ↗
85. Effect of micro-segregation of alloying elements on the precipitation behaviour in laser surface engineered Alloy 71810.1016/j.actamat.2021.116844 ↗
86. Solute redistribution during planar and dendritic growth of directionally solidified Ni-base superalloy CMSX-10
87. A study of HAZ microfissuring in a newly developed ALLVAC® 718 PLUS™ superalloy
88. Effect of Ni and Nb on phase stability, mechanical properties, and corrosion characteristics of CoCrMo-based high entropy alloys
89. Partition coefficients of alloying and eutectic phases of chromium elements to primary austenite lrons for rolls10.2355/isijinternational.32.1150 ↗
90. Numerical modeling and experimental investigation of Co-Cr-Mo alloys solidification
91. Diffusion of solutes in fcc cobalt investigated by diffusion couples and first principles kinetic Monte Carlo10.1016/j.actamat.2016.01.028 ↗
92. Thermodynamic assessment of the C–Nb–Mo system over the entire composition and temperature ranges10.1016/j.calphad.2015.09.001 ↗
93. Yttrium addition to heat-resistant cast stainless steel10.1016/j.scriptamat.2006.01.024 ↗
94. Diffusion of carbon in cobalt10.2320/matertrans1989.30.984 ↗
95. Kubaschewski · 1979
96. Solidification observations of dendritic cast Al alloys reinforced with TiC particles10.1007/s11665-010-9636-y ↗
97. Solidification observations of vacuum arc melting processed Fe-Al-TiC composites: TiC precipitation mechanisms10.1016/j.matchar.2011.10.009 ↗
98. Corrosion in Cr-Fe-Co-Ni-Nb hypoeutectic and hypereutectic high entropy alloys
99. Corrosion and passivation behavior of FeCoCrNiNbx eutectic high-entropy alloys in H2SO4 solution10.1016/j.jmrt.2023.10.313 ↗
100. Corrosion behaviour of CoCrMo alloys in 2 wt% sulphuric acid solution10.1016/j.electacta.2014.01.143 ↗