Investigation of the wear pattern of the Ti-TiN-(Ti,Al,Cr)N nanostructured coating with a varying modulation period
Source abstract
Abstract
The paper describes the results of the study of Ti-TiN-(Ti,Al,Cr)N nanostructured coatings with varying modulation period λ. The study was focused on the coatings with the modulation period λ, increasing from 20 to 300 nm and decreasing from 300 to 20 nm. A sample with the constant modulation period λ = 50 nm was assumed as an object of comparison. The hardness of the coatings and their resistance to fracture during scratch testing were found. The structure of the coatings was studied using scanning (SEM) and transmission (TEM) electron microscopy. The data on the elemental and phase composition of the coatings were compared. It has been found that a coating with an increasing modulation period λ provides higher tool wear resistance during the turning of steel. The studies reveal differences in the patterns of cracking in the coatings under consideration. The crystalline structure of the coatings was studied. It has been found that, with identical grain sizes, the coatings have noticeable differences in terms of texture severity.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Cutting with coated tools: coating technologies, characterization methods and performance optimization10.1016/j.cirp.2012.05.006 ↗
2. Advanced characterization methods for wear resistant hard coatings: A review on recent progress10.1016/j.surfcoat.2015.11.016 ↗
3. Recent progress in large scale manufacturing of multilayer/superlattice hard coatings10.1016/S0257-8972(00)00959-2 ↗
4. Nano-and Micro-scale impact testing of hard coatings: a review10.3390/coatings12060793 ↗
5. Evaluating the microstructure and performance of nanocomposite PVD TiAlBN coatings10.1016/S0257-8972(01)01657-7 ↗
6. Nanostructured component fabrication by electron beam-physical vapor deposition10.1361/105994905X56223 ↗
7. Brittleness and fatigue effect of mono- and multi-layer PVD films on the cutting performance of coated cemented carbide inserts10.1016/j.cirp.2014.03.081 ↗
8. Investigation of wear mechanisms for the rake face of a cutting tool with a multilayer composite nanostructured Cr–CrN-(Ti,Cr,Al,Si)N coating in high-speed steel turning10.1016/j.wear.2019.203069 ↗
9. On the significance of the H/E ratio in wear control: a nano-composite coating approach to optimized tribological behavior10.1016/S0043-1648(00)00488-9 ↗
10. Plastic deformation behavior of nanostructured CrN/AlN multilayer coatings deposited by hybrid dcMS/HPPMS10.1016/j.surfcoat.2017.06.092 ↗
11. Recent advances of superhard nanocomposite coatings: a review10.1016/S0257-8972(02)00903-9 ↗
12. Influence of the nanostructure of Ti-TiN-(Ti,Al,Cr)N multilayer composite coating on tribological properties and cutting tool life10.1016/j.triboint.2020.106388 ↗
13. TiAlN based nanoscale multilayer coatings designed to adapt their tribological properties at elevated temperatures10.1016/j.tsf.2005.03.048 ↗
14. Investigation of wear mechanisms of multilayer nanostructured wear-resistant coatings during turning of steel. Part 2: diffusion, oxidation processes and cracking in Ti-TiN-(Ti,Cr,Mo,Al)N coating10.1016/j.wear.2021.204096 ↗
15. Development and research of nanostructured multilayer composite coatings for tungsten-free carbides with extended area of technological applications10.1007/s00170-016-8739-5 ↗
16. Study of properties of nanostructured multilayer composite coatings of Ti-TiN-(TiCrAl)N and Zr-ZrN-(ZrNbCrAl)N10.4028/www.scientific.net/JNanoR.40.90 ↗
17. Structure, wear and corrosion behaviours of Cr–Al–C and multilayer [Cr–Al–C/a-C]n coatings fabricated by physical vapour deposition and plasma-assisted chemical vapour deposition techniques10.1016/j.surfcoat.2019.124912 ↗
18. CrVN/TiN nanoscale multilayer coatings deposited by DC unbalanced magnetron sputtering10.1016/j.surfcoat.2017.07.086 ↗
19. Novel TiAlCN/VCN nanoscale multilayer PVD coatings deposited by the combined high-power impulse magnetron sputtering/unbalanced magnetron sputtering (HIPIMS/UBM) technology10.1016/j.vacuum.2008.03.064 ↗
20. Microstructures and tribological properties of CrN/ZrN nanoscale multilayer coatings10.1016/j.apsusc.2008.10.075 ↗
21. Effect of periodicity on hardness and scratch resistance of CrN/NbN nanoscale multilayer coating deposited by cathodic arc technique10.1016/j.wear.2015.01.051 ↗
22. Tribological and oxidation behaviour of TiAlCN/VCN nanoscale multilayer coating deposited by the combined HIPIMS/(HIPIMS-UBM) technique10.1016/j.surfcoat.2010.10.049 ↗
23. Novel CrAlYN/CrN nanoscale multilayer PVD coatings produced by the combined high power impulse magnetron sputtering/unbalanced magnetron sputtering technique for environmental protection of γ-TiAl alloys10.1016/j.surfcoat.2010.02.021 ↗
24. Tribological and mechanical properties of Ti/TiAlN/TiAlCN nanoscalemultilayer PVD coatings deposited on AISI H11 hot work tool steel10.1016/j.apsusc.2014.03.026 ↗
25. Synthesis and microstructural characterization of nanoscale multilayer TiAlN/TaN coatings deposited by DC magnetron sputtering10.1007/s00170-018-2972-z ↗
26. Six strategies to produce application tailored nanoscale multilayer structured PVD coatings by conventional and high power impulse magnetron sputtering (HIPIMS)10.1016/j.tsf.2019.137409 ↗
27. Modeling intrinsic residual stresses built-up during growth of nanostructured multilayer NbN/CrN coatings10.1016/j.surfcoat.2016.07.108 ↗
28. Microstructure and phase forming behavior of chrome based multi-composition nitride coatings with nanolayer structures10.1016/j.ceramint.2014.03.114 ↗
29. Mechanical and tribological properties of nanostructured TiAlN/TaN coatings deposited by DC magnetron sputtering10.1016/j.surfcoat.2019.124941 ↗
30. Investigation of the influence of the thickness of nanolayers in wear-resistant layers of Ti-TiN-(Ti,Cr,Al)N coating on destruction in the cutting and wear of carbide cutting tools10.1016/j.surfcoat.2020.125402 ↗
31. Nonlinear dynamic analysis of FGM Sandwich shallow shells with variable thickness of layers10.1007/978-3-030-75890-5_4 ↗
32. Investigating geometrically nonlinear vibrations of laminated shallow shells with layers of variable thickness via the R-functions theory10.1016/j.compstruct.2015.02.054 ↗
33. Nonlinear vibrations of laminated shells with layers of variable thickness
34. Investigation of wear and diffusion processes on rake faces of carbide inserts with Ti-TiN-(Ti,Al,Si)N composite nanostructured coating10.1016/j.wear.2018.10.004 ↗
35. Properties of (Cr,Al,Si)N-(DLC-Si) composite coatings deposited on a cutting ceramic substrate10.1016/j.ceramint.2020.04.147 ↗
36. Vacuum-arc multilayer nanostructured TiN/Ti coatings: structure, stress state, properties10.1007/s11041-012-9451-1 ↗
37. Investigation of multicomponent nanolayer coatings based on nitrides of Cr, Mo, Zr, Nb, and Al10.1016/j.surfcoat.2020.126258 ↗
38. Comparative analysis of cutting properties and nature of wear of carbide cutting tools with multi-layered nano-structured and gradient coatings produced by using of various deposition methods10.1007/s00170-016-9676-z ↗
39. Development of wear-resistant complex for high-speed steel tool when using process of combined cathodic vacuum arc deposition10.1016/j.procir.2013.06.159 ↗
40. Specific features of the structure and properties of arc-PVD coatings depending on the spatial arrangement of the sample in the chamber10.1016/j.vacuum.2022.111047 ↗
41. Investigation of the influence of the features of the deposition process on the structural features of microparticles in PVD coatings10.1016/j.vacuum.2022.111144 ↗
42. ASTM C1624--05 · 2010
43. Control of parameters of the cutting process on the basis of diagnostics of the machine tool and workpiece10.1007/s11018-012-9999-6 ↗
44. Investigation of the structure and phase composition of the microdroplets formed during the deposition of PVD coatings10.1016/j.surfcoat.2022.128574 ↗
45. Microstructure and mechanical properties evaluation of cathodic arc deposited CrCN/ZrCN multilayer coatings10.1016/j.jallcom.2019.06.370 ↗
46. Suwas · 2014
47. Dislocation ordering and texture strengthening of naturally aged Al-Cu-Mg alloy10.1016/j.jmst.2021.12.011 ↗
48. Texture dependent strain hardening in additively manufactured stainless steel 316L10.1016/j.msea.2021.141483 ↗
49. Texture and cleavage in molybdenum10.1155/TSM.6.21 ↗
50. The influence of texture and grain structure on the high temperature low-cycle fatigue behaviour of the ODS nickel-based superalloy PM 100010.1016/S0921-5093(97)00264-5 ↗
51. Influence of the crystalline texture on the fatigue behavior of a 316L austenitic stainless steel10.1016/S0921-5093(00)00804-2 ↗
52. Processing titanium alloys for optimum fatigue performance10.1016/S0142-1123(99)00061-4 ↗
53. Effect of grain size, texture and density of precipitates on the hardness and tensile yield stress of Mg-14Gd-0.5Zr alloys10.1016/j.matdes.2016.10.074 ↗
54. Evolution of microstructure, texture, and hardness in an Al-Cu-Mg alloy during annealing10.1007/s11665-021-06265-3 ↗
55. Microstructure, texture, and hardness evolutions of Al-Mg-Si-Cu alloy during annealing treatment10.1007/s11595-019-2191-y ↗
56. Texture evolution and enhanced grain refinement under high-pressure-double-torsion10.1016/j.msea.2014.05.081 ↗
57. Effect of hot rolling on microstructure, crystallographic texture, and hardness of AZ31 alloy10.1016/j.matchemphys.2021.125130 ↗
58. A study of the nanostructure and hardness of electron beam evaporated TiAlBN coatings10.1016/j.tsf.2009.12.109 ↗
59. The growth and structure of gold and silver deposits formed by evaporation inside an electron microscope10.1080/14786436408224212 ↗
60. Surface energy driven secondary grain growth in thin Au films10.1063/1.96543 ↗
61. Grain growth in polycrystalline thin films of semiconductors10.1023/A:1008616620663 ↗
62. A model for development of orientation of vapour deposits10.1007/BF00544515 ↗