Microstructure and performance of diamond composites fabricated by self-propagating high-temperature synthesis using high-frequency induction as a heat source
Source abstract
Abstract
Abstract A mixture of Al, Ti, Cu, Ni, and Sn was used as the matrix material to fabricate diamond composites and grinding heads through self-propagating high-temperature synthesis (SHS). High-frequency induction was used as a heat source for preheating to ignite SHS. The SHS was examined, and the microstructure of the reaction products was analyzed by scanning electron microscopy and X-ray diffraction. As a comparison, diamond composites and grinding heads were fabricated by hot pressed sintering (HPS) using Cu-based matrix. The grinding performance of heads was tested in the grinding of Zirconia ceramics. Results showed that ferromagnetic Ni was a key element without which SHS could not start. Increasing frequency prolonged preheating time and decreased combustion temperature. The increasement of Al + Ti content in the matrix aggravated the combustion temperature and thereby aggravated the porosity. The optimal grinding ratios of SHS grinding heads was reached when Al + Ti weight content was 30% and was only 4% lower than that of HPS ones. The grinding forces of SHS grinding heads was lower than that of HPS ones. Carbides Ti 3 AlC and Ti 3 AlC 2 formed on the diamond surface during SHS.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Self–propagating high–temperature synthesis of zirconolite using CuO and MoO3 as the oxidants10.1111/ijac.12382 ↗
2. Applying FeAl coating on the low carbon steel substrate through self-propagation high temperature synthesis (SHS) process10.1016/j.surfcoat.2015.12.029 ↗
3. Self-propagating high temperature synthesis of SiAlON10.1016/j.ijrmhm.2015.11.010 ↗
4. Self-propagating high-temperature synthesis: a new method for the production of diamond-containing materials10.1016/0925-9635(93)90054-6 ↗
5. SHS—a new technological approach for creation of novel multilayered diamond-containing materials with graded structure
6. Structural view study on diamond and copper bonding with AlNi micro/nano multilayers10.1016/S1875-5372(15)60009-1 ↗
7. Effect of c-BN size and content on the self-propagating high-temperature synthesis of c-BN composites bonded with Ti-Al-C system multiphase products10.1515/htmp-2014-0151 ↗
8. Self-propagation high-temperature sintering of the Ti–Al–C-diamond/BN system10.3139/146.111039 ↗
9. Ni3Al/diamond composites produced by pulse plasma sintering (PPS) with the participation of the SHS reaction10.1016/j.jallcom.2015.02.174 ↗
10. Microstructure of Ni-Al-diamond composite fabricated by self-propagating high temperature synthesis10.4028/www.scientific.net/KEM.291-292.531 ↗
11. Fabrication of grinding tool material by the SHS of Ni-Al/diamond/dilute10.1016/j.ijrmhm.2010.12.013 ↗
12. Effect of Ni-Al SHS reaction on diamond grit for fabrication of diamond tool material10.1016/j.ijrmhm.2010.01.002 ↗
13. Effects of Fe additions on self-propagating high temperature synthesis characteristics of TiO2–Al–C system10.1016/j.ijrmhm.2014.07.006 ↗
14. Synthesis of WSi2 and W2B intermetallic compound by in-situ self-propagating high-temperature synthesis reaction10.2109/jcersj2.122.496 ↗
15. Laser ignition in self-propagating high temperature synthesis of porous NiTinol shape memory alloy10.1016/j.matlet.2017.01.097 ↗
16. Effect of Ti/Si ratio on the synthesized products of laser ignited Self-propagating High-temperature Synthesis (SHS) in an Al-Ti-Si system
17. Finding the energy source for self-propagating high-temperature synthesis production of NiTi shape memory alloy10.1016/j.matchemphys.2016.06.062 ↗
18. Production of nanocrystalline TiB2 powder through self-propagating high temperature synthesis (SHS) of TiO2–H3BO3–Mg mixture10.1179/1743676114Y.0000000188 ↗
19. Innovative technology for preparation of seamless nitinol tubes using SHS without forming10.1007/s11661-017-3974-4 ↗
20. Fabrication of Ni-Ti alloy by self-propagating high-temperature synthesis and spark plasma sintering technique10.1007/s11663-016-0894-4 ↗
21. Microwave ignition of the combustion synthesis of aluminides and field-related effects10.1016/j.jallcom.2015.10.044 ↗
22. Microwave assisted combustion synthesis in the system Ti–Si–C for the joining of SiC: experimental and numerical simulation results10.1016/j.jeurceramsoc.2013.03.005 ↗
23. Synthesis and assembly of nanomaterials under magnetic fields
24. The effect of graphene reinforcement on the mechanical properties of Al2O3 ceramics rapidly sintered by high-frequency induction heating10.1016/j.ijrmhm.2014.10.011 ↗
25. Enhanced properties of nanostructured ZrO2–graphene composites rapidly sintered via high-frequency induction heating10.1016/j.ceramint.2014.08.042 ↗
26. Interfacial microstructure and residual stress of continuously brazed diamond with Ag-Cu-Ti using ultra-high frequency induction
27. Induction brazing diamond grinding wheel with Ni-Cr filler alloy10.4028/www.scientific.net/MSF.532-533.377 ↗
28. Experimental investigation of surface quality for minimum quantity oil-water lubrication grinding10.1007/s00170-011-3491-3 ↗
29. Combustion synthesis of Ni3Al by SHS with boron additions10.1016/j.jallcom.2004.08.025 ↗
30. Electrodeposited anisotropic NiFe 45/55 thin films for high-frequency micro-inductor applications10.1016/j.jmmm.2009.01.038 ↗
31. Die life considering the deviation of the preheating billet temperature in hot forging process10.1016/j.finel.2004.11.005 ↗
32. The effect of spray parameters on the properties of high velocity oxy-fuel NiAl intermetallic coatings10.1016/S0257-8972(99)00511-3 ↗
33. Study of specific energy and friction coefficient in minimum quantity lubrication grinding using oil-based nanolubricants10.1016/j.jmapro.2012.01.001 ↗
34. Porous NiTi by thermal explosion mode of SHS: processing, mechanism and generation of single phase microstructure10.1016/j.actamat.2004.11.036 ↗
35. Synthesis and characterization of W–Cu nanocomposites developed by mechanical alloying10.1016/j.msea.2006.06.049 ↗
36. Effect of surfactant on the electrodeposition and wear resistance of Ni–Al2O3 composite coatings10.1016/j.msea.2006.06.098 ↗