journal article·2023-12

Phase transformations in WC-Cr3C2-Ni thermal spray coatings under low, medium and high thermal input: Part 2 – DSC analysis and heat-treated coating characterisation

Steven Matthews, Prenha Prasad

Publisher page

Abstract

Conventionally, bulk WC and Cr 3C 2-based carbide compositions have been used independently of each other. However, recent investigations have begun to explore combining these carbides together within the same composite/hard metal coating system. This work explored the diversity of phases produced in the coatings from a 42 wt% WC-42 wt% Cr 3C 2–16 wt% Ni powder sprayed under “low”, “medium” and “high” thermal input conditions using high velocity oxygen-fuel (HVOF), an argon‑helium (Ar He) plasma and an argon‑hydrogen (Ar H 2) plasma respectively. The thermally driven solid-state transformations in the coatings were investigated as a function of carbide dissolution/decomposition, using differential scanning calorimetry (DSC). All coatings exhibited a well defined exothermic peak attributed to the transformation of the metastable supersaturated Ni-alloy and WC 1-X phases in the as-sprayed coatings, into the equilibrium Ni alloy and a mix of the intermediate metastable carbide phases β-W 2C and Cr 3C 2- Y. At higher temperatures the metastable compounds transformed to the equilibrium phases of ε-W 2C and Cr 3C 2. A defining feature of the XRD analysis was the significant shift in lattice positions of all phases, indicating substitutional alloying. The mechanisms of phase formation are discussed.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Hardmetals as thermal spray coatings10.1179/174329007X246078 ↗
2. Application of hardmetals as thermal spray coatings10.1016/j.ijrmhm.2014.09.029 ↗
3. Fauchais · 2014
4. Robert · 2013
5. Tribological properties of HVOF sprayed WC-Cr3C2-Ni coating
6. Carbide dissolution in WC-17Co thermal spray coatings: Part 1-project concept and as-sprayed coatings10.1016/j.jallcom.2020.157464 ↗
7. Thermally induced metallurgical processes in Cr3C2-NiCr thermal spray coatings as a function of carbide dissolution10.1016/j.jallcom.2017.08.246 ↗
8. Tribo-behaviour of APS and HVOF sprayed WC–Cr3C2–Ni coatings for gears10.1080/02670844.2020.1742988 ↗
9. Effect of sulphide concentration on corrosion behaviors of HVOF-sprayed WC-Cr3C2-Ni and WC-Ni coatings10.1016/j.ijrmhm.2023.106104 ↗
10. Influence of vacuum heat treatment on wear behavior of HVAF sprayed WC-Cr3C2–Ni coatings10.1016/j.vacuum.2023.112431 ↗
11. Phase transformations in WC-Cr3C2-Ni thermal spray coatings under low, medium and high thermal input: part 1 – feedstock and as-sprayed coating characterisation
12. Tungsten carbides: Structure, properties and application in Hardmetals10.1007/978-3-319-00524-9 ↗
13. Thermally induced metallurgical transformations in WC-17Co thermal spray coatings as a function of carbide dissolution: Part 2 - Heat-treated coatings10.1016/j.ijrmhm.2021.105486 ↗
14. Development of high carbide dissolution/low carbon loss Cr3C2-NiCr coatings by shrouded plasma spraying10.1016/j.surfcoat.2014.07.062 ↗
15. Thermophysical and microstructural studies on thermally sprayed chromium carbide coatings
16. Thermal analysis in practice – collected applications
17. NaCl and filled Re3B-type structures for two metastable chromium carbides10.1080/13642819308220147 ↗
18. New metastable carbides produced by crystallization of amorphous CrC alloys10.1016/0921-5093(91)90152-D ↗
19. A metastable chromium carbide powder obtained by carburization of a metastable chromium oxide10.1016/S0925-8388(96)02384-5 ↗
20. Tungsten carbides and W-C phase diagram10.1134/S0020168506020051 ↗
21. Phase equilibria in the W-C system and tungsten carbides10.1070/RC2006v075n07ABEH003606 ↗
22. Change in lattice spacing of nickel by dissolved chromium and tungsen
23. The Cr-Ni (chromium-nickel) system10.1007/BF02867812 ↗
24. Texturing in a Ni–W/TiN thin-film system10.1134/S1063784218080200 ↗
25. Carbothermal synthesis of Cr3C2-WC-Ni nanocomposite powders10.4028/www.scientific.net/AMR.661.3 ↗
26. Thermodynamic evaluation of the C-Cr-Fe-W system10.1007/BF02645482 ↗
27. Novel binders for WC-based cemented carbides with high Cr contents10.1016/j.ijrmhm.2019.105063 ↗
28. Diffusion and solubility of Cr in WC10.1016/j.jallcom.2009.09.137 ↗
29. Upadhyaya · 1998
30. Villars · 1995
31. Creation of modified Cr3C2–NiCr hardmetal coating microstructures through novel processing10.1016/j.jallcom.2020.153868 ↗
32. Formation of W-Cr-Phases during the production of Cr-doped WC powders
33. Watson
34. Cemented carbide phase diagrams: a review10.1016/j.ijrmhm.2011.02.004 ↗
35. Data set for diffusion coefficients and relative creep rate ratios of 26 dilute Ni-X alloy systems from first-principles calculations10.1016/j.dib.2018.08.144 ↗
36. A thermodynamic evaluation of the C-Ni-W system10.1515/ijmr-1987-780212 ↗
37. Ni-W (nickel-tungsten)
38. Kurlov · 2013 · 2013
39. Chromium-nickel-carbon (Cr-Ni-C) phase diagram10.1007/s11669-999-0011-3 ↗
40. Ternary System Cr-Ni-W: Datasheet from Landolt-Börnstein - Group IV Physical Chemistry · Volume 19C2: "Ternary Steel Systems: Phase Diagrams and Phase Transition Data" in SpringerMaterials (https://doi.org/10.1007/978-3-540-88154-4_11), in: A. Watson, T. Markus (Eds.), Springer-Verlag Berlin Heidelberg.
41. The C-Ni (carbon-nickel) system10.1007/BF02881419 ↗
42. Thermodynamic properties of the Co-W-C system10.1007/BF02651660 ↗
43. A revised thermodynamic description of the Co-W-C system10.1007/s11669-005-0133-1 ↗
44. The eta carbides in the Fe-W-C and Co-W-C systems10.1007/BF02811752 ↗
45. Quantitative phase analysis by X-ray diffraction in the Co-W-C system10.1007/BF01689306 ↗
46. The C-Cr (carbon-chromium) system10.1007/BF02841701 ↗
47. Atomistic simulation of an f.c.c./b.c.c. interface in Ni-Cr alloys10.1016/S1359-6454(97)00159-6 ↗
48. A study on WC-Ni cemented carbides: constitution, alloy compositions and properties, including corrosion behaviour10.1016/j.ijrmhm.2021.105750 ↗
49. The two-phase region of WC-15%Ni alloy affected by chromium carbide addition10.2497/jjspm.36.320 ↗
50. Influence of feedstock powder characteristics and spray processes on microstructure and properties of WC-(W,Cr)2C-Ni hardmetal coatings10.1016/j.surfcoat.2010.07.032 ↗