Tungsten (111) crystal strain hardening in nano-indentations
Source abstract
Abstract
Abstract Plastic stress-strain calculations are presented for a substantial range in load versus displacement measurements made with rounded tips of Berkovich nano-indentations on tungsten (111) crystal surfaces. The computed hardness stresses are shown to be comparable to hardness measurements obtained on [111]-axis micro-whiskers; and, the subsequent indentation strain hardening is greater than, but compares favorably with, compression stress measurements made on tungsten [111]-axis micro-pillars. The indentation strain hardening is attributed to the small spacing of nucleated dislocations that proceed to form reacted 〈010〉 dislocation obstacles within the nano-scale deformation zones. The strain hardening is a larger effect than the Indentation Size Effect (ISE) measured for deeper polygonal (or conical) indentations.
Source: openaire · Quality: candidate unverified · Source record ↗
References (23)
Show source-provided references
1. Exceptional crystal strain hardening determined over macro- to micro- to nano-size scales in continuous spherical indentation tests10.1016/j.msea.2019.04.090 ↗
2. Tabor · 1951
3. Nanoindentation size effect of tungsten single crystal10.1016/S1875-5372(18)30048-1 ↗
4. Importance of surface preparation on the nano-indentation stress-strain curves measured in metals10.1557/jmr.2009.0137 ↗
5. Incipient plasticity in tungsten during nano-indentation: dependence on surface roughness, probe radius and crystal orientation10.1016/j.ijrmhm.2018.03.020 ↗
6. Critical comments to the Oliver-Pharr measurement technique of hardness and elastic modulus by instrumented indentations and refinement of its basic relations10.3103/S1063457617060016 ↗
7. Review of nanoindentation size effect: Experiments and atomistic simulation
8. Lattice misorientation and displaced volume for microhardness indentations in MgO crystals10.1111/j.1151-2916.1978.tb09248.x ↗
9. Plastic deformation of tungsten due to deuterium plasma exposure: insights from micro-compression tests10.1016/j.scriptamat.2018.10.052 ↗
10. Mechanical properties of single crystal tungsten microwhiskers characterized by nanoindentation10.1016/j.msea.2009.05.060 ↗
11. The thermoviscoplastic response of polycrystalline tungsten in compression10.1016/S0921-5093(99)00517-1 ↗
12. Theory of brittle fracture in steel and similar metals
13. A minimal gradient-enhancement of the classical continuum theory of crystal plasticity
14. Slip-induced cleavage in polycrystalline tungsten10.1016/0022-5088(64)90086-4 ↗
15. Fracture studies of tungsten single crystals10.1016/0167-577X(94)90036-1 ↗
16. Crack propagation in single crystals of tungsten10.1080/14786436508228132 ↗
17. Dislocation-driven stable crack growth by micro-cleavage in semi-brittle crystals10.1016/0956-716X(92)90009-4 ↗
18. Brittle fracture and the brittle-to-ductile transition in tungsten10.1016/j.jnucmat.2003.08.009 ↗
19. A new look at attractive/repulsive junctions and cleavage crack formation in bcc metals10.1016/j.engfracmech.2009.04.018 ↗
20. Crystal engineering for mechanical strength at nano-scale dimensions10.3390/cryst7100315 ↗
21. Microstructure and mechanical properties of super-strong nanocrystalline tungsten processed by high-pressure torsion10.1016/j.actamat.2006.05.005 ↗
22. Rate limiting deformation mechanisms of bcc metals in confined volumes10.1016/j.actamat.2019.01.020 ↗
23. Microindentations on W and Mo oriented single crystals: an STM study10.1016/0956-7151(93)90100-7 ↗