An estimate of microstrain and dislocation density in as-built unalloyed molybdenum processed by electron beam powder bed fusion
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (35)
Show source-provided references
1. Chapter 13 - refractory alloys: vanadium, niobium, molybdenum, tungsten
2. Understanding the processability, microstructure, and mechanical properties of molybdenum processed by electron beam powder bed fusion10.1016/j.ijrmhm.2025.107091 ↗
3. Densification and crack suppression in selective laser melting of pure molybdenum10.1016/j.matdes.2017.04.094 ↗
4. Molybdenum and tungsten manufactured by selective laser melting: analysis of defect structure and solidification mechanisms10.1016/j.ijrmhm.2019.104999 ↗
5. Laser powder bed fusion additive manufacturing of molybdenum using a nitrogen build atmosphere
6. Microstructure and mechanical properties of unalloyed molybdenum fabricated via wire arc additive manufacturing10.1016/j.ijrmhm.2022.105886 ↗
7. Comparison of microstructure, crystallographic texture, and mechanical properties in Ti–15Mo–5Zr–3Al alloys fabricated via electron and laser beam powder bed fusion technologies
8. Crystallographic texture evolution in electron beam melting additive manufacturing of pure molybdenum
9. An overview of residual stresses in metal powder bed fusion
10. Residual stresses in selective laser sintering and selective laser melting10.1108/13552540610707013 ↗
11. Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L10.1016/j.actamat.2020.07.063 ↗
12. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗
13. High resolution mapping of strains and rotations using electron backscatter diffraction10.1179/174328406X130966 ↗
14. Interplay of dislocation substructure and elastic strain evolution in additively manufactured Inconel 62510.1016/j.msea.2020.139380 ↗
15. In-situ twin-wire additive manufacturing: integrated fabrication of refractory medium entropy alloy, correlation between orientation and slip systems activation
16. Correlating the evolution of spatial-resolved microscale residual stress and the associated dislocation behavior in additively manufactured 316L stainless steel upon short-term annealing
17. Evolution of intragranular stresses and dislocation densities during cyclic deformation of polycrystalline copper10.1016/j.actamat.2015.04.031 ↗
18. Electron diffraction based techniques in scanning electron microscopy of bulk materials10.1016/S0968-4328(97)00032-2 ↗
19. Simulation-based super-resolution EBSD for measurements of relative deformation gradient tensors10.1016/j.ultramic.2025.114180 ↗
20. Tailored grain morphology via a unique melting strategy in electron beam-powder bed fusion10.1016/j.msea.2021.141820 ↗
21. Recrystallization kinetics, mechanisms, and topology in alloys processed by laser powder-bed fusion: AISI 316L stainless steel as example10.1016/j.mtla.2021.101236 ↗
22. The origin of abnormal grain growth upon thermomechanical processing of laser powder-bed fusion alloys
23. Recrystallization in non-conventional microstructures of 316L stainless steel produced via laser powder-bed fusion: effect of particle coarsening kinetics10.1007/s10853-021-06859-1 ↗
24. The residual stress in as-built laser powder bed fusion IN718 alloy as a consequence of the scanning strategy induced microstructure10.1038/s41598-020-71112-9 ↗
25. Delineating dislocation structures and residual stresses in additively manufactured alloys10.1016/j.actamat.2023.119413 ↗
26. Dislocation density measurement by electron channeling contrast imaging in a scanning electron microscope10.1016/j.scriptamat.2011.11.027 ↗
27. On the recrystallization behavior of technically pure molybdenum10.1016/j.ijrmhm.2010.03.006 ↗
28. Revealing the room temperature superplasticity in bulk recrystallized molybdenum10.1038/s41467-023-44056-7 ↗
29. Resolving the geometrically necessary dislocation content by conventional electron backscattering diffraction10.1016/j.scriptamat.2008.01.050 ↗
30. Irradiationinduced microstrain and dislocation density in additively manufactured 316H stainless steel10.1016/j.jmrt.2024.11.060 ↗
31. Microstrain measurement in plastically deformed austenitic steel10.1155/TSM.33.219 ↗
32. The impact of grain-scale strain localization on strain hardening of a high-Mn steel: real-time tracking of the transition from the γ → ε → α’ transformation to twinning10.1016/j.actamat.2020.07.038 ↗
33. Microstrain and boundary misorientation evolution for recrystallized super DSS after deformation10.1016/j.matchemphys.2020.122815 ↗
34. Characterization of Al–Al4C3 nanocomposites produced by mechanical milling10.1016/j.matchar.2015.06.007 ↗
35. Atomistic origin of microstrain broadening in diffraction data of nanocrystalline solids10.1016/j.actamat.2008.12.011 ↗