Experimental investigation and simulation of the effect of Ti and N contents on the formation of fcc-free surface layers in WC–Ti(C,N)–Co cemented carbides
Source abstract
Abstract
Abstract The effect of Ti and N contents on the formation of fcc-free surface layers in WC–Ti(C,N)–Co cemented carbides is systematically studied by experimental investigations and DICTRA simulations. The cemented carbides with different Ti and N contents have been sintered in a nitrogen free atmosphere. The microstructure, concentration distributions and concentration profiles have been analyzed via SEM, EPMA and EDX, respectively. The thermodynamic database for multi-component cemented carbides has been developed through a combination of experimental, theoretical and assessment work. Ti and N activity profiles between the surface and bulk are thermodynamically calculated to show the influence to the gradient zone. The modified Sutherland equation is employed to construct the diffusion database. Based on the databases, the gradient zone formation of the cemented carbides is simulated by DICTRA software. The simulation results are compared with the experimental results to demonstrate the application of the established databases. Besides, the growth rate of the fcc-free surface layers and the maximum value of cobalt peak in cemented carbides as a function of nitrogen or titanium content are predicted.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Microstructures of cemented carbonitrides10.1016/S0261-3069(01)00006-1 ↗
2. Gradient zones in WC–Ti(C, N)–Co-based cemented carbides: experimental study and computer simulations10.1016/S1359-6454(00)00029-X ↗
3. Development of CVD WC–Co coatings10.1016/S0257-8972(00)01079-3 ↗
4. Effects of gradient structure on the microstructures and properties of coated cemented carbides10.1016/S1005-8850(06)60075-3 ↗
5. Effect of nitrogen introduction methods on the microstructure and properties of gradient cemented carbides10.1007/s12613-011-0501-2 ↗
6. The beta-free layer formed near the surface of vacuum-sintered WC–beta-Co alloys containing nitrogen10.2320/matertrans1960.22.758 ↗
7. Kinetics of compositional modification of (W, Ti)C–WC–Co alloy surfaces10.1016/0025-5416(88)90500-9 ↗
8. Binder-phase enrichment by dissolution of cubic carbides10.1016/0263-4368(93)90062-K ↗
9. Effect of cubic phase composition on gradient zone formation in cemented carbides10.1016/S0263-4368(01)00043-9 ↗
10. Investigations on kinetics of formation of fcc-free surface layers on cemented carbides with Fe–Ni–Co binders10.1016/j.ijrmhm.2010.12.007 ↗
11. Experimental investigations and DICTRA simulations on formation of diffusion-controlled fcc-rich surface layers on cemented carbides10.1016/j.apsusc.2011.05.024 ↗
12. A new labyrinth factor for modelling the effect of binder volume fraction on gradient sintering of cemented carbides10.1016/S1359-6454(02)00515-3 ↗
13. The influence of carbon content on formation of carbo-nitride free surface layers in cemented carbides10.1016/S0263-4368(02)00034-3 ↗
14. The Thermo-Calc databank system10.1016/0364-5916(85)90021-5 ↗
15. Computer simulation of multicomponent diffusional transformations in steel: Proc. Int. Symp
16. Assessment of the mobility of carbon in fcc C–Cr–Fe–Ni alloys
17. Models for numerical treatment of multicomponent diffusion in simple phases10.1063/1.351745 ↗
18. Development of a database for cemented carbides: thermodynamic modeling and experiments10.1007/s11669-001-0028-8 ↗
19. Development of a thermodynamic database for cemented carbides for design and processing simulations10.1007/s11663-000-0099-7 ↗
20. Kinetics of formation of graded layers on cemented carbides: experimental investigations and DICTRA simulations10.1016/j.ijrmhm.2010.11.003 ↗
21. CSUTDCC1—a thermodynamic database for multicomponent cemented carbides
22. A modified Sutherland equation for obtaining diffusivities in liquid and its effect on microstructure simulation of WC–Ti(C, N)–Co gradient cemented carbides
23. Experimental Investigation and Computer Simulation of Gradient Zone Formation in WC–Ti(C, N)–TaC–NbC–Co Cemented Carbides10.1007/s11669-013-0225-2 ↗
24. A model for accurate predictions of self-diffusivities in liquid metals, semimetals, and semiconductors10.1007/s11663-006-0039-2 ↗
25. Self diffusion in liquid titanium: quasielastic neutron scattering and molecular dynamics simulation10.4028/www.scientific.net/DDF.289-292.609 ↗
26. Improvement of computer simulation models for metallic melts via quasielastic neutron scattering: a case study of liquid titanium10.1103/PhysRevB.80.212203 ↗
27. CSUDDCC1—a diffusion database for multicomponent cemented carbides