journal article·2017-08

Effect of ball milling treatment on the microstructure and microhardness of Nb-25Cr alloy

Haizhong Zheng, Shiping Cheng, Xiaoyong Shu, Guifa Li

Publisher page

Abstract

Abstract Samples of Nb-25Cr alloy were ball milled for durations of 12 h, 24 h, 36 h and 48 h. The effect of processing time on the microstructure and microhardness of Nb-25Cr alloy was investigated. The experimental results show that a deformation layer is obtained on the surface of the treated Nb-25Cr alloy samples. The deformation layer thickness correlates directly with the processing time. The ball milling treatment led to the emergence of cracks on the surface of the 48 h treated specimen due to strain and strain rate. Broad width XRD (X-ray diffraction) peaks with weak intensity and FWHM (full width at half-maximum) increasement indicate that the surface microstructure of Nb-25Cr alloy is refined. A gradual microstructure refinement on the surface of Nb-25Cr alloy is observed, corresponding to the higher strain energy introduced into the surface layer with extended processing times. Improvement in microhardness of Nb-25Cr alloy is due to microstructure refinement and work hardening effects. The microhardness of the 48 h treated specimen fell abruptly due to the cracks on the sample surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. The fracture resistance and crack-tip micromechanics of in-situ intermetallic composites
2. Microstructure and mechanical properties of Laves-phase alloys based on Cr2Nb10.1016/0921-5093(91)90361-P ↗
3. The effect of alloying on the properties of (Nb, Ti) Cr2 C15 Laves phases10.1016/S0921-5093(01)01614-8 ↗
4. High temperature mechanical properties of C15 Laves phase Cr2Nb intermetallics10.1016/0921-5093(94)03319-6 ↗
5. Influence of grain size on the oxidation behavior of NbCr2 alloys at 950–1200°C10.1016/j.corsci.2008.11.014 ↗
6. Effects of alloy additions on the microstructure and properties of Cr-Cr2Nb alloys10.1016/0921-5093(96)10197-0 ↗
7. Effect of Al additions on the oxidation behavior of Laves phase NbCr2 alloys at 1373K and 1473K10.1016/j.ijrmhm.2008.09.007 ↗
8. Microstructure and oxidation behavior of modified aluminide coating on Ni3Al-based single crystal superalloy10.1016/S1000-9361(11)60451-2 ↗
9. Sealing role of B2O3 in MoSi2–CrSi2–Si/B-modified SiC coating for C/C composites10.1016/j.corsci.2012.04.018 ↗
10. Oxidation-resistant Ge-doped silicide coating on Cr-Cr2Nb alloys by pack cementation10.1016/S0921-5093(96)10516-5 ↗
11. Diffusion of chromium in nanocrystalline iron produced by means of surface mechanical attrition treatment10.1016/S1359-6454(03)00260-X ↗
12. Influence of the surface nanocrystallization on the gas nitriding of Ti–6Al–4V alloy10.1016/j.apsusc.2013.09.105 ↗
13. Nitriding iron at lower temperatures10.1126/science.1080216 ↗
14. Surface nanocrystallization (SNC) of metallic materials-presentation of the concept behind a new approach
15. Nanostructuring of metals by severe plastic deformation for advanced properties10.1038/nmat1180 ↗
16. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
17. Formation mechanism and annealing behavior of nanocrystalline ferrite in pure Fe fabricated by ball milling10.2355/isijinternational.41.1389 ↗
18. Synthesis of Fe-Cu nanoparticles by mechanochemical processing using a ball mill10.2320/matertrans.43.667 ↗
19. Role of strain gradient on grain refinement by severe plastic deformation10.1016/j.msea.2006.03.150 ↗
20. Nanocrystalline metals prepared by high-energy ball milling10.1007/BF02646980 ↗
21. Effects of annealing temperature on Laves phase Cr2Nb synthesizing by solid phase thermal reaction
22. Investigation on microstructures and properties of NbCr2 Laves Phase alloys prepared by mechanical alloying followed by hot pressing
23. Low cycle fatigue of as-HIP and HIP+ forged René 9510.1007/BF02812013 ↗
24. Effects of fine porosity on the fatigue behavior of a powder metallurgy superalloy10.1007/BF02655199 ↗
25. Effect of thermally induced porosity on an as-HIP powder metallurgy superalloy
26. Microstructure and mechanical properties of two-phase Cr–Cr2Nb, Cr–Cr2Zr and Cr–Cr2(Nb, Zr) alloys10.1016/S0921-5093(98)00981-2 ↗
27. Cold deformation microstructures10.1179/mst.1990.6.11.1039 ↗
28. Microstructure and thermal stability of bulk nanocrystalline alloys produced by surface mechanical attrition treatment10.1016/j.apsusc.2013.12.008 ↗
29. Plastic strain-induced grain refinement at the nanometer scale in copper10.1016/j.actamat.2006.07.013 ↗
30. An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment10.1016/S1359-6454(02)00310-5 ↗
31. Formation of short crack and its effect on fatigue properties of ultrasonic peening treatment S355 steel10.1016/j.matdes.2015.10.009 ↗
32. Almen intensity effect on microstructure and mechanical properties of low carbon steel subjected to severe shot peening10.1016/j.apsusc.2013.10.184 ↗
33. Physical metallurgy and mechanical properties of transition-metal laves phase alloys10.1016/S0966-9795(00)00109-6 ↗
34. Grain size effects on the austenitization process in a nanostructured ferritic steel10.1016/j.actamat.2011.03.006 ↗
35. Strain-induced refinement in a steel with spheroidal cementite subjected to surface mechanical attrition treatment10.1016/j.actamat.2007.09.003 ↗
36. X-ray diffraction in crystals, imperfect crystals, and amorphous bodies10.1021/ja01079a041 ↗
37. The theory of X-ray diffraction in crystals10.1021/j150447a024 ↗
38. X-ray diffraction procedures for polycrystalline and amorphous materials10.1021/ed032p228.2 ↗
39. Size strain VI: diffraction analysis of the microstructure of materials10.1017/S0885715612000589 ↗
40. Microstructural parameters from X-ray diffraction peak broadening10.1016/j.scriptamat.2004.05.007 ↗
41. Analytical formulation of the variance method of line-broadening analysis for Voigtian X-ray diffraction peaks10.1107/S0021889806017122 ↗
42. Scherrer after sixty years: a survey and some new results in the determination of crystallite size10.1107/S0021889878012844 ↗
43. Novel analytical model for the determination of grain size distributions in nanocrystalline materials with low lattice microstrains by X-ray diffractometry10.1016/j.actamat.2005.08.018 ↗
44. Interrogation of the microstructure and residual stress of a nickel-base alloy subjected to surface severe plastic deformation10.1016/j.actamat.2007.10.003 ↗
45. Micro-structure and surface layer properties of 18CrNiMo7-6 steel after multistep shot peening10.1016/j.matdes.2013.04.011 ↗
46. Maltose-assisted sol–gel synthesis, structural, magnetic and optical properties of multiferroic BiFeO3 nanopowders