journal article·2017-11

Effect of impingement angle and WC content on high temperature erosion behavior of SiC-WC composites

Sandan Kumar Sharma, B. Venkata Manoj Kumar, Young-Wook Kim

Publisher page

Abstract

Abstract Hot pressed dense SiC-(0, 10, 30 or 50 wt%)WC composites were subjected to erosion against SiC particles at 800 °C. Effects of WC content and angle of impingement (30°, 60° or 90°) on the erosion performance of composites were evaluated. Erosion rate ranged from 2.1 × 102 mm3/kg to 7.7 × 102 mm3/kg with varying WC content or angle of impingement. The erosion rate of the composites increased with increasing the impingement angle from 30° to 90°, and decreased with WC content up to 30 wt%. Minimum and maximum erosion wear rates were obtained for SiC-30 wt% WC composites at 30° and for SiC-50 wt% WC composites at normal impact, respectively. Grain fracture and pull-out were observed as major mechanisms of material removal for the composites. Decreased angle of impingement led to reduced grain fracture and pull-out, and hence reduction in material removal. Owing to increased fracture toughness with incorporation of WC particles, the composites showed less fracture and removal of WC particles up to 30 wt% reinforcement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Silicon carbide: synthesis and properties
2. Silicon carbide—a survey of synthetic approaches, properties and applications10.1007/3-540-45613-9_2 ↗
3. Mechanical and tribological properties of electrically conductive SiC based cermets10.1016/j.ijrmhm.2016.12.017 ↗
4. Current status of environmental barrier coatings for Si-based ceramics
5. Development of SiC/(W, Ti) C gradient ceramic nozzle materials for sand blasting surface treatments10.1016/j.ijrmhm.2006.03.006 ↗
6. Tribological characteristics of SiC ceramics sintered with a small amount of yttria10.1016/j.ceramint.2015.07.210 ↗
7. Machining performance of silicon carbide ceramic in end electric discharge milling10.1016/j.ijrmhm.2010.09.001 ↗
8. Erosion wear of laminated ceramic nozzles10.1016/j.ijrmhm.2006.06.005 ↗
9. Tribological behavior of silicon carbide ceramics—a review10.4191/kcers.2016.53.6.581 ↗
10. Solid particle erosion
11. Hard particle erosion of silicon carbide and silicon carbide-titanium diboride from room temperature to 1000°C10.1016/S0043-1648(97)80015-4 ↗
12. Erosion behavior of SiC fiber-SiC matrix composites10.1016/0043-1648(90)90172-7 ↗
13. Solid particle erosion-wear behavior of SiC–Si3N4 composite ceramic at elevated temperature10.1016/j.ceramint.2014.07.055 ↗
14. Elevated temperature solid particle erosion of silicon carbide continuous fibre reinforced calcium aluminosilicate glass-ceramic matrix composite10.1016/S0043-1648(96)07385-1 ↗
15. Effect of temperature and particle velocity on the erosion of a silicon carbide continuous fiber reinforced calcium aluminosilicate glass–ceramic matrix composite10.1016/S0043-1648(99)00222-7 ↗
16. Erosion behavior of SiC-WC composites10.1016/j.ceramint.2013.11.146 ↗
17. Effect of WC addition on sliding wear behavior of SiC ceramics10.1016/j.ceramint.2014.10.144 ↗
18. Hutchings · 1992
19. Basu · 2011
20. Effect of material parameters on the erosion resistance of brittle materials10.1007/BF00745575 ↗
21. The brittle-to-ductile transition in pre-cleaved silicon single crystals10.1080/14786437508228099 ↗
22. Dynamic K1C and dynamic flexural strength in HS-130 Si3N410.1007/BF00738490 ↗
23. α-Sialon-Al-SiC composite refractories
24. High temperature erosion behavior of spark plasma sintered ZrB2-SiC composites10.1016/j.ceramint.2017.04.039 ↗
25. Solid particle erosion of SiC and SiC–TiB2 composite hot-pressed with Y2O310.1016/S0043-1648(98)00293-2 ↗
26. The erosion of reaction-bonded SiC10.1016/0043-1648(80)90194-5 ↗
27. Dynamic solid particle damage in brittle materials: an appraisal10.1007/BF00738475 ↗
28. Anomalous solid-particle erosion rate of hot-pressed silicon carbide10.1111/j.1151-2916.1980.tb10771.x ↗
29. High-temperature strength of silicon carbide ceramics sintered with rare-earth oxide and aluminum nitride10.1016/j.actamat.2006.08.059 ↗
30. High-temperature effects in the fracture mechanical behavior of silicon carbide liquid-phase sintered with AlN-Y2O3 additives10.1016/S0955-2219(00)00317-4 ↗
31. Microstructure and high-temperature strength of silicon carbide with 2000ppm yttria10.1016/j.jeurceramsoc.2017.07.002 ↗
32. Impact damage in brittle materials in the elastic-plastic response regime10.1098/rspa.1978.0106 ↗
33. On the correlation between solid-particle erosion and fracture parameters in SiC10.1007/BF01111969 ↗
34. Effect of material parameters on the erosion resistance of brittle materials10.1007/BF00745575 ↗
35. Effect of microstructure on erosive wear behavior of SiC ceramics10.1016/0043-1648(94)06535-7 ↗
36. Wear modes in slurry jet erosion of tungsten carbide hardmetals: their relationship with microstructure and mechanical properties10.1016/j.ijrmhm.2014.07.036 ↗