Finite element modeling of the WC–10 wt.% Co thermal stresses: Build-up and phase specific strain response during cyclic loading
Source abstract
Abstract
Several finite element models of the morphology of WC-10 wt.% Co were employed to reproduce the build-up of thermal residual stresses as well as the phase specific strain during loading-unloading in compression. The different models differ only in their geometry of the interpenetrating skeletons of WC and Co. They all respect the given volume proportion of each phase. Thermoelasticity is considered for the brittle WC, while also plasticity is included to model the Co binder phase. We compare the predictions of our FEM models with phase specific strain measurements performed by in-situ neutron diffraction and discuss the model validation. (C) 2014 Elsevier Ltd. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
References (15)
Show source-provided references
1. Mechanical behaviour of WC–11wt.% Co studied by bending tests, internal friction and electron microscopy
2. High temperature behaviour WC–Co hard metal studied by internal friction
3. Temperature and stresses in the two-phase alloy WC–Co
4. Studies of residual stresses in WC–Co systems
5. X-ray stress analysis of WC–Co cermet10.1111/j.1151-2916.1969.tb09181.x ↗
6. Residual stress in WC–Co measured by neutron diffraction10.1016/0921-5093(95)10147-0 ↗
7. Effect of particle size on thermal residual stress in WC–Co composites10.1016/S0921-5093(03)00379-4 ↗
8. Measurement of residual thermal stress in WC–Co by neutron diffraction10.1016/j.ijrmhm.2008.11.015 ↗
9. Measurement and modeling of room temperature co-deformation in WC–10wt.% Co10.1016/j.msea.2005.02.024 ↗
10. In-situ response of WC–Ni composites under compressive load10.1007/s11661-007-9196-4 ↗
11. Thermal residual stress distribution in WC–Ni composites10.1016/0921-5093(95)10107-1 ↗
12. Larson · 2000
13. Assessment of the constitutive properties from small ball punch test: experiment and modeling10.1016/j.jnucmat.2004.07.052 ↗
14. The dependence of the contiguity of WC on Co content and its independence from WC grain size in WC–Co alloys10.1016/j.ijrmhm.2005.04.012 ↗
15. Residual stresses