Effects of laser hatch spacing and post-processing atmosphere on the microstructure and mechanical properties of TiC-CoCrNi cermets fabricated by selective laser melting
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (55)
Show source-provided references
1. On the toughening of ceramics by strong reinforcements10.1016/0001-6160(86)90146-X ↗
2. A review on the microstructure and properties of TiC and Ti(C,N) based cermets10.1016/j.ijrmhm.2023.106320 ↗
3. Additive manufacturing of WC-Co cemented carbides: process, microstructure, and mechanical properties
4. A review of additive manufacturing of cermets
5. Microstructure characteristics and formation mechanisms of in situ WC cemented carbide based hardmetals prepared by selective laser melting10.1016/j.msea.2010.08.075 ↗
6. Additive manufacturing technologies: 3D printing, rapid prototyping, and direct digital manufacturing
7. EBSD investigation of microstructure and microtexture evolution on additively manufactured TiC-Fe based cermets—influence of multiple laser scanning10.1016/j.micron.2024.103613 ↗
8. Process chain development for additive manufacturing of cemented carbide10.1016/j.jmapro.2018.05.036 ↗
9. Manufacturing of carbide tools by selective laser melting10.1016/j.promfg.2018.02.182 ↗
10. Effects of different post-processing temperatures on the microstructure and mechanical properties of TiC-Ni cermets fabricated by selective laser melting10.1016/j.ijrmhm.2025.107097 ↗
11. Fabrication and properties of Ti(C,N)-based cermets with multi-component AlCoCrFeNi high-entropy alloys binder10.1016/j.matlet.2013.08.087 ↗
12. The microstructure and properties of novel Ti(C,N)-based cermets with multi-component CoCrFeNiCu high-entropy alloy binders10.1016/j.msea.2019.138345 ↗
13. Effects of binders on the microstructures and mechanical properties of ultrafine WC-10%AlxCoCrCuFeNi composites by spark plasma sintering10.1016/j.jallcom.2019.03.328 ↗
14. Enhancement effects of FeCoNiCrMn high-entropy alloy doping on the Ti(C, n)-based cermets: microstructure and mechanical properties10.1016/j.ijrmhm.2024.106695 ↗
15. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
16. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
17. Nano-twin mediated plasticity in carbon-containing FeNiCoCrMn high entropy alloys10.1016/j.jallcom.2015.05.224 ↗
18. Wetting behaviors of TiC0.4N0.6 and CoCrNi medium-entropy alloy system10.1016/j.ijrmhm.2021.105502 ↗
19. Ti(C,N)-based cermets with fine grains and uniformly dispersed binders: effect of the Ni–Co based binders10.1016/j.ceramint.2019.11.102 ↗
20. Improvement of high temperature oxidation behavior of Cr3C2-20 wt % Ni cermets by adding 1 wt % Mo10.1016/j.jallcom.2017.10.012 ↗
21. Effect of precipitation behavior on mechanical properties of a Nb-containing CoCrNi-based high-entropy alloy10.1007/s12540-022-01265-x ↗
22. The effect of annealing on mechanical properties of selective laser melted CoCrNi medium-entropy alloy10.1016/j.matlet.2023.134353 ↗
23. Microstructure and mechanical properties of additive manufactured TiC-reinforced Fe55Cr25Co10Ni10 high-entropy alloy composites10.1016/j.optlastec.2025.112870 ↗
24. Laser additive manufacturing of CoCrNi medium entropy alloy composites reinforced by in-situ nanoprecipitations: microstructure formation and mechanical properties10.1016/j.matchar.2023.113500 ↗
25. Effect of high-temperature heat treatment on mechanical properties and microstructure of CoCrNi medium-entropy alloy formed by laser powder bed fusion10.1016/j.jmrt.2024.12.263 ↗
26. Surface energy of arbitrary crystal plane of BCC and FCC metals10.1016/S0022-3697(99)00415-1 ↗
27. Microstructural evolution of quaternary AlCoCrNi high-entropy alloys during heat treatment10.3390/ma17143617 ↗
28. Strength-ductility synergy of CoCrNi medium-entropy alloy processed with laser powder bed fusion10.1016/j.matdes.2022.110774 ↗
29. Phase composition and microstructure of WC-Co alloys obtained by selective laser melting
30. Possibilities of manufacturing products from cermet compositions using nanoscale powders by additive manufacturing methods10.3390/ma12203425 ↗
31. Printability and microstructure of selective laser melting of WC/Co/Cr powder10.3390/ma12152397 ↗
32. Effect of hatch length on the development of microstructure, texture and residual stresses in selective laser melted superalloy inconel 71810.1016/j.matdes.2017.08.049 ↗
33. Heat transfer and fluid flow of molten pool during selective laser melting of AlSi10Mg powder: simulation and experiment10.1016/j.jmapro.2017.02.009 ↗
34. Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting10.1007/s00170-014-6297-2 ↗
35. The investigation of the influence of laser re-melting on density, surface quality and microstructure of selective laser melting parts10.1108/13552541111156450 ↗
36. Effect of scanning strategies on residual stress and mechanical properties of selective laser melted Ti6Al4V10.1016/j.msea.2017.11.103 ↗
37. Residual stress analysis of additive manufacturing of metallic parts using ultrasonic waves: state of the art review10.1016/j.jmrt.2020.05.092 ↗
38. Microstructure of Ti(C,N)-based cermets—Influence of sintering temperature10.1016/j.ijrmhm.2022.105897 ↗
39. Influence of sintering parameters on the grain growth and mechanical properties of Ti(C,N)-based cermets prepared via mechanical activation and in-situ carbothermal reduction
40. Mechanical and magnetic properties of (Ti,W)C–xCoCrFeNiMo cermets sintered at different sintering temperatures10.1016/j.ijrmhm.2022.105899 ↗
41. Additive manufacturing of CMCs with bimodal microstructure10.1016/j.jallcom.2022.168416 ↗
42. Effect of selective laser melting process parameters on microstructural and mechanical properties of TiC–NiCr cermet10.1016/j.ceramint.2020.08.037 ↗
43. Effects of sulfur concentration and marangoni convection on melt-pool formation in transition mode of selective laser melting process10.1016/j.matdes.2019.107866 ↗
44. Heat and convection pattern of the melt pool generated by DED on tilt surfaces10.1088/1402-4896/adc17b ↗
45. Investigation on additive manufacturing of tungsten carbide-cobalt by selective laser melting10.1016/j.procir.2015.08.060 ↗
46. Laser powder bed fusion of cemented carbides by developing a new type of co coated WC composite powder
47. Ostwald ripening in Al–Li alloys: a test of theory10.3139/146.110777 ↗
48. High-quality Ti(C,N)-based cermets via solid-state nitrogen-pressure sintering: Influence of the sintering atmosphere10.1016/j.ijrmhm.2020.105291 ↗
49. Comparison of Ti(C, n)-based cermets by vacuum and gas-pressure sintering: microstructure and mechanical properties10.1016/j.ceramint.2017.10.003 ↗
50. Electron probe microanalysis: a review of the past, present, and future10.1017/S1431927615000409 ↗
51. Design of alternative binders for hard materials10.1016/j.ijrmhm.2019.105089 ↗
52. A novel high entropy CoFeCrNiCu alloy filler to braze SiC ceramics10.1016/j.jeurceramsoc.2020.03.044 ↗
53. Selective laser melting of Ti6Al4V alloy: process parameters, defects and post-treatments10.1016/j.jmapro.2021.01.009 ↗
54. A process parameters review on selective laser melting-based additive manufacturing of single and multi-material: microstructure, physical properties, tribological, and surface roughness
55. Microstructure and mechanical properties regulation and control of in-situ TiC reinforced CoCrFeNiAl0.2 high-entropy alloy matrix composites via high-gravity combustion route10.1016/j.jallcom.2021.163221 ↗