TRIP behavior of non-equiatomic Co40Cr20Ni15Fe15Mo10 high entropy alloys
Source abstract
Abstract
Herein, the transformation-induced plasticity (TRIP) effect is investigated in a novel Co-rich high entropy alloy (HEA), Co 40Cr 20Ni 15Fe 15Mo 10 , by optimizing its constituent elements and processing conditions. The tensile properties of the HEA are shown to increase with strain rate, reaching a maximum tensile strength and elongation at a strain rate of 1 × 10 −3 s −1 , due to the formation of martensite. The X-ray diffraction patterns reveal that the as-annealed HEA has initially a single FCC structure, but transforms a dual FCC and HCP structure at the above-mentioned strain rate, with the main deformation mechanisms being dislocation slip and phase transformation. The tensile fracture surface of the Co-rich HEA shows a stepped interphase boundary between the FCC and HCP phases, thus suggesting failure along the brittle HCP structure.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. Mechanical properties and corrosion resistance characterization of a novel Co36Fe36Cr18Ni10 high-entropy alloy for bioimplants compared to 316L alloy10.1016/j.jallcom.2022.163947 ↗
4. Microstructure and mechanical properties of new AlCoxCrFeMo 0.5Ni high-entropy alloys10.1002/adem.200900171 ↗
5. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
6. Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution10.1016/j.corsci.2018.02.031 ↗
7. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
8. Effects of Al and Ti co-doping on the strength-ductility- corrosion resistance of CoCrFeNi-AlTi high-entropy alloys10.1016/j.jallcom.2022.166751 ↗
9. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
10. Ab initio assisted design of quinary dual-phase high-entropy alloys with transformation-induced plasticity10.1016/j.actamat.2017.07.023 ↗
11. Extremely high strength and work hardening ability in a metastable high entropy alloy10.1038/s41598-018-28383-0 ↗
12. Design and tensile properties of a bcc Ti-rich high-entropy alloy with transformation-induced plasticity10.1080/21663831.2016.1221861 ↗
13. Natural-mixing guided design of refractory high-entropy alloys with as-cast tensile ductility10.1038/s41563-020-0750-4 ↗
14. Novel Co-rich high performance twinning-induced plasticity (TWIP) and transformation-induced plasticity (TRIP) high-entropy alloys10.1016/j.scriptamat.2019.02.018 ↗
15. Break the strength-ductility trade-off in a transformation-induced plasticity high-entropy alloy reinforced with precipitation strengthening10.1016/j.jmst.2021.08.061 ↗
16. Novel Co-rich high entropy alloys with superior tensile properties10.1080/21663831.2018.1553803 ↗
17. FactSage thermochemical software and databases, 2010-2016
18. Microstructures and properties of Al0.3CoCrFeNiMnx high-entropy alloys10.1016/j.matchemphys.2017.07.085 ↗
19. Microstructure and mechanical properties of multiprincipal component CoCrFeNiMo x alloys10.1016/j.matchar.2012.05.005 ↗
20. Twinning engineering of a CoCrFeMnNi high-entropy alloy10.1016/j.scriptamat.2021.113808 ↗
21. Deformation mechanisms and work-hardening behavior of transformation-induced plasticity high entropy alloys by in -situ neutron diffraction10.1080/21663831.2018.1523239 ↗
22. Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2016.07.038 ↗
23. Modeling the work hardening behavior in metastable high entropy alloys10.1016/j.msea.2021.141778 ↗
24. Strain-rate effect upon the tensile behavior of CoCrFeNi high-entropy alloys10.1016/j.msea.2017.02.077 ↗
25. Interaction between slip and twinning systems and the influence of twinning on the mechanical behavior of FCC metals and alloys10.1007/BF02648536 ↗
26. (TiZrNbTa)90Mo10 high-entropy alloy: electrochemical behavior and passive film characterization under exposure to Ringer’s solution10.1016/j.corsci.2020.108513 ↗
27. Stacking fault energy of face-centered-cubic high entropy alloys10.1016/j.intermet.2017.10.004 ↗
28. Strain rate sensitive microstructural evolution in a TRIP assisted high entropy alloy: experiments, microstructure and modeling10.1016/j.mechmat.2021.103798 ↗
29. High strain rate compression behaviour of single phase CoCuFeMnNi high entropy alloy10.1016/j.jallcom.2020.153763 ↗
30. Evidence of FCC to HCP and BCC-martensitic transformations in a CoCrFeNiMn high-entropy alloy by severe plastic deformation10.1016/j.msea.2021.140875 ↗
31. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD10.1016/j.msea.2010.01.004 ↗
32. Exceptionally high strain-hardening and ductility due to transformation induced plasticity effect in Ti-rich high-entropy alloys10.1038/s41598-020-70298-2 ↗
33. Effects of deformation-induced martensitic transformation on cryogenic fracture toughness for metastable Si8V2Fe45Cr10Mn5Co30 high-entropy alloy10.1016/j.actamat.2021.117568 ↗