journal article·2024-11

High temperature tensile properties and deformation behavior of CoCrFeNiW0.2 high entropy alloy

Pei Wang, Weichao Wu, Aigang Pan, Zhiming Guo, Liu Xia, Fei Cui, Xiaojun Yang, Guanyu Yang

Publisher page

Abstract

High entropy alloys (HEAs) have been a new-type of structural materials, which show good performance in various extreme conditions. In the present study, we systematically investigated the high temperature deformation behavior of as-cast CoCrFeNiW 0.2 HEA under different temperatures from 298 to 1173 K and various strain rate of 1 × 10 −4 s −1 to 5 × 10 −3 s −1 . An obvious temperature dependence of yield strength can be found with a remarkable decrease from 362 MPa at 298 K to 119 MPa at 1173 K. The normal Portevin–Le Chatelier (PLC) effect was presented in the intermediate temperature range of 673 K to 1073 K, the serrated flow transformed in the sequence of A → A + B → A + C → B + C → C with the increasing temperature, which is caused by dynamic strain aging (DSA). W atoms played an important role in the interaction between solute atoms and dislocations. Fractography analysis suggests the failure mode transition from transgranular fracture to intergranular fracture. Electron backscatter diffraction (EBSD) demonstrates that the high temperature deformation mechanism of the HEA is dominated by dynamic recovery (DRV). Additionally, transmission electron microscopy (TEM) was performed to observe the dislocation configurations and the interaction between dislocations and μ phase precipitates at various temperatures, and these results further identify the high temperature deformation mechanism. To summarize, this study indicates the proposed HEA has excellent high temperature mechanical properties and a wide range of potential applications in many fields.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Confusion by design10.1038/366303a0 ↗
2. A crucial review on recent updates of oxidation behavior in high entropy alloys10.1007/s42452-021-04374-1 ↗
3. Low-density, refractory multi-principal element alloys of the Cr–Nb–Ti–V–Zr system: microstructure and phase analysis10.1016/j.actamat.2012.11.032 ↗
4. Effect of Ti additions on mechanical properties of NbMoTaW and VNbMoTaW refractory high entropy alloys10.1016/j.intermet.2017.01.007 ↗
5. Wear and oxidation resistances of AlCrFeNiTi-based high entropy alloys10.1016/j.intermet.2018.07.017 ↗
6. Ductile W0.4MoNbxTaTi refractory high-entropy alloys with excellent elevated temperature strength10.1016/j.matlet.2021.129753 ↗
7. Enhancing high temperature mechanical properties via modulating B2 phase with Al contents in FeCrNiAlx(x=0.63,0.71,0.77) high entropy alloys10.1016/j.jallcom.2022.163883 ↗
8. Exceptional resistance to grain growth in nanocrystalline CoCrFeNi high entropy alloy at high homologous temperatures10.1016/j.jallcom.2015.12.020 ↗
9. Two mechanisms for the normal and inverse behaviors of the critical strain for the Portevin–Le Chatelier effect10.1016/j.actamat.2012.08.035 ↗
10. Effect of temperature and strain rate on serrated flow behaviour of Hastelloy X10.1016/j.msea.2011.12.011 ↗
11. Effects of temperature on serrated flows of Al0.5CoCrCuFeNi high-entropy alloy10.1007/s11837-015-1580-8 ↗
12. Temperature effects on the serrated behavior of an Al0.5CoCrCuFeNi high-entropy alloy10.1016/j.matchemphys.2017.09.004 ↗
13. Experiments and model for serration statistics in low-entropy, medium-entropy, and high-entropy alloys10.1038/srep16997 ↗
14. Temperature effects on deformation and serration behavior of high-entropy alloys (HEAs)10.1007/s11837-014-1130-9 ↗
15. Mechanical properties and deformation mechanisms of a Ni2Co1Fe1V0.5Mo0.2 medium-entropy alloy at elevated temperatures10.1016/j.actamat.2021.116982 ↗
16. Dynamic strain ageing in iron alloys: the shielding effect of carbon10.1016/j.actamat.2016.04.018 ↗
17. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
18. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
19. The tensile properties and serrated flow behavior of a thermomechanically treated CoCrFeNiMn high-entropy alloy10.1016/j.msea.2017.03.031 ↗
20. High-temperature tensile deformation behavior of hot rolled CrMnFeCoNi high-entropy alloy10.1016/j.jallcom.2017.09.293 ↗
21. High temperature tensile properties of as-cast and forged CrMnFeCoNi high entropy alloy10.1016/j.msea.2022.143570 ↗
22. Development of MoNbVTax refractory high entropy alloy with high strength at elevated temperature10.1016/j.msea.2022.143554 ↗
23. Effect of Al on microstructure and mechanical properties of lightweight AlxNb0.5TiV2Zr0.5 refractory high entropy alloys10.1016/j.msea.2023.144628 ↗
24. Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy10.1016/j.jallcom.2011.02.171 ↗
25. Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy10.1007/s10853-012-6260-2 ↗
26. Refractory high-entropy alloys10.1016/j.intermet.2010.05.014 ↗
27. Effects of deformation and annealing on the microstructures and properties of a nonequiatomic Co29Cr29Fe29Ni12.5W0.5 high-entropy alloy
28. Remarkable strength of a non-equiatomic Co29Cr29Fe29Ni12.5W0.5 high-entropy alloy at cryogenic temperatures10.1016/j.msea.2021.141446 ↗
29. Microstructure and mechanical properties of CoCrFeNiW high entropy alloys reinforced by μ phase particles10.1016/j.jallcom.2020.155997 ↗
30. Microstructure, mechanical properties and corrosion resistance of CoCrFeNiWx (x=0, 0.2, 0.5) high entropy alloys10.1016/j.intermet.2019.106550 ↗
31. Microstructural evolution, mechanical properties and corrosion resistance of CoCrFeNiW0.5 high entropy alloys with various annealing heat treatment10.1016/j.jallcom.2022.165602 ↗
32. Effect of atomic size difference on the type of major intermetallic phase in arc-melted CoCrFeNiX high-entropy alloys10.1016/j.jallcom.2016.10.286 ↗
33. Mechanical properties and phase stability of WTaMoNbTi refractory high-entropy alloy at elevated temperatures10.1007/s40195-021-01263-9 ↗
34. Serration and noise behaviors in materials10.1016/j.pmatsci.2017.06.004 ↗
35. Strengthening in MULTIPHASE(MP35N) alloy: part II. Elevated temperature tensile and creep deformation10.1007/BF02660874 ↗
36. Dynamic strain aging and twin formation during warm deformation of a novel medium-entropy lightweight steel10.1016/j.jmrt.2022.01.057 ↗
37. The characteristics of serrated flow in superalloy IN738LC10.1016/j.msea.2007.09.061 ↗
38. A model for the Portevin-Le Chatelier effect in substitutional alloys10.1016/0001-6160(72)90028-4 ↗
39. A study of basic processes characterizing dynamic strain ageing10.1002/(SICI)1521-396X(199811)170:1<63::AID-PSSA63>3.0.CO;2-F ↗
40. Evolution of dislocation densities and the critical conditions for the Portevin-Le Châtelier effect10.1016/0956-7151(90)90021-8 ↗
41. Three types of Portevin–Le Chatelier effects: experiment and modelling10.1016/j.actamat.2006.10.029 ↗
42. Strengthening in multi-principal element alloys with local-chemical-order roughened dislocation pathways10.1038/s41467-019-11464-7 ↗
43. Chemical short range order strengthening in a model FCC high entropy alloy10.1016/j.actamat.2020.02.041 ↗
44. Tuning element distribution, structure and properties by composition in high-entropy alloys10.1038/s41586-019-1617-1 ↗
45. Brandes · 1983
46. Dynamic strain aging of Al0.3CoCrFeNi high entropy alloy single crystals10.1016/j.scriptamat.2015.06.022 ↗
47. The characteristics of serration in Al0.5CoCrFeNi high entropy alloy10.1016/j.msea.2017.05.075 ↗
48. Grain size and temperature effect on the tensile behavior and deformation mechanisms of non-equiatomic Fe41Mn25Ni24Co8Cr2 high entropy alloy10.1016/j.jmst.2019.09.034 ↗
49. Mechanism of intermediate temperature embrittlement of Ni and Ni-based superalloys10.1080/10408436.2011.613492 ↗
50. High temperature deformation behavior of Al0.2CoCrFeNiMo0.5 high entropy alloy: dynamic strain ageing10.1016/j.jallcom.2022.167422 ↗
51. Characterization of non-metallic inclusions and their influence on the mechanical properties of a FCC single phase high-entropy alloy10.1016/j.jallcom.2018.05.339 ↗
52. Tensile properties of an AlCrCuNiFeCo high-entropy alloy in as-cast and wrought conditions10.1016/j.msea.2011.11.045 ↗
53. Dynamic recrystallization behavior of a typical nickel-based superalloy during hot deformation10.1016/j.matdes.2013.12.072 ↗
54. Transmission electron microscopy characterization of dislocation structure in a face-centered cubic high-entropy alloy Al0.1CoCrFeNi10.1016/j.actamat.2017.10.050 ↗
55. EBSD study of deformation microstructure of an as-homogenized austenitic Mn steel after hot compression10.1002/adem.201800327 ↗
56. High temperature deformation mechanism and microstructural evolution of relatively lightweight AlCoCrFeNi high entropy alloy10.1016/j.intermet.2020.106707 ↗
57. The mechanical threshold stress model for various tempers of AISI 4340 steel10.1016/j.ijsolstr.2006.05.022 ↗
58. Line tension of screw dislocations on cross-slip planes10.1080/095008396180335 ↗
59. Cross-slip in the high-temperature deformation of germanium, silicon and indium antimonide
60. Heterogeneous dislocation loop nucleation and free surface effects on plastic deformation: an in situ transmission electron microscopy study10.1016/0921-5093(93)90661-W ↗
61. Influence of γ’ precipitates on Portevine-Le Chatelier effect of NI-based superalloys10.1016/j.msea.2015.04.033 ↗
62. Hot deformation behavior and microstructural evolution of a superaustenitic stainless steel10.1016/j.msea.2009.10.051 ↗
63. Dislocation-particle interactions during high temperature deformation of two-phase aluminum alloys10.1016/0001-6160(87)90281-1 ↗
64. Microstructural evolution of indirect-extruded ZK60 alloy by adding Ce10.1016/j.jallcom.2012.08.025 ↗