journal article·2009-03

Dependence of splat remelt and stress evolution on surface roughness length scales in plasma sprayed thermal barrier coatings

S.N. Basu, G. Ye, R. Khare, B. McCandless, M. Gevelber, D. Wroblewski

Publisher page

Abstract

Abstract Analysis of real surfaces in plasma sprayed thermal barrier coatings showed roughness features at different length scales. It was found that the basic physics of the underlying splat remelt process can be characterized using a single non-dimensional temperature. Significantly different levels of remelt were calculated for the different surface roughness wavelengths, highlighting the importance of multiple length scales. A fully coupled thermo-mechanical finite element model was used to study the buildup of stresses during splat solidification. It was found that only roughness features on the scale of splat thickness are important in providing locations of maximum stress concentrations. It was found that the surface roughness features in real coatings are not sinusoidal. Instead, a more realistic ‘ideal’ surface roughness geometry is proposed, with periodic regions of stress concentration defined as small concave arcs with large curvatures surrounded by large convex arcs of smaller curvature on either side.
Source: openaire · Quality: candidate unverified · Source record ↗

References (16)

Show source-provided references
1. Characterization of microstructure defects in plasma sprayed thermal barrier coating10.1007/BF02646967 ↗
2. The relationship between the mechanism of formation, microstructure and properties of plasma-sprayed coatings10.1016/0040-6090(81)90633-7 ↗
3. Modeling of the anisotropic elastic properties of plasma-sprayed coatings in relation to their microstructure10.1016/S1359-6454(99)00384-5 ↗
4. Bengtsson P. Segmentation cracks in plasma sprayed thick thermal barrier coatings. PhD Dissertation, Linkoeping University, Linkoeping, Sweden, 1997.
5. Modeling oxidation induced stresses in thermal barrier coatings10.1016/S0921-5093(97)00849-6 ↗
6. Modeling of particles impacting on a rigid substrate under plasma spraying conditions10.1007/BF02648527 ↗
7. Sikka M. Modeling for control of plasma deposition: plasma particle interactions and solidification process. M.S. Thesis, Boston University, College of Engineering, 1997.
8. Mathematical modeling of a melt pool driven by an electron beam10.1007/s11663-999-0085-7 ↗
9. Watkins TR, Hubbard CR, Bjerke JL. Measuremnt of elastic constants in plasma-sprayed zirconia coatings using X-ray diffraction. Proceedings of the 96th annual meeting of the American Ceramic Society, April 24–28, 1994, Indianapolis, IN: American Ceramic Society; 1994.
10. Rao Y. Numerical simulation of effective thermal conductivity for plasma sprayed coatings. M.S. Thesis, Boston University, College of Engineering, 1999.
11. Material property evaluation of thick thermal barrier coating system10.1115/1.3240292 ↗
12. Effects of thermal coefficient and lattice constant mismatch on mosaic dispersion of heteroepitaxial YSZ/Si(001) thin films10.1088/0022-3727/35/2/307 ↗
13. Solidification modeling of plasma sprayed TBC: analysis of remelt and multiple length scales of rough substrates10.1361/105996302770348934 ↗
14. ABAQUS is licensed by Abacus Inc., Pawtucket, RI.
15. Microcrack formation in plasma sprayed thermal barrier coatings10.1016/j.ijrmhm.2005.05.005 ↗
16. Ye G. Understanding crack formation in plasma sprayed thermal barrier coatings and their effects on coating properties. PhD Dissertation, Boston University, Boston, USA, 2004.