Substrate effect on the mechanical and tribological properties of arc plasma physical vapour deposition coatings
Source abstract
Abstract
Abstract The present study describes and compares the mechanical and tribological properties of CrN coatings deposited by PVD/CAPD (Cathodic Arc Plasma Deposition) on three different substrates: steel, aluminium alloy and reinforced aluminium alloy. The coating-substrate interfaces were analysed by scanning electron microscopy (SEM). The ultra-microindentation technique was applied to measure coating hardness. Experiments using a tribometer (pin on disc configuration) under lubricated conditions have been performed in order to evaluate the friction and wear properties of the different systems. The measured coating hardness depends on the indentation depth reached in the ultra-microindentation tests. In this study the coating-substrate system has been characterized, analyzing the hardness variation from the coating to the substrate by different indentation depths, and modelling the experimental curve with a universally approved mathematical model. The CrN–steel system exhibits the best performance, in which the system hardness is close to the CrN coating hardness. The CrN–AMC system performs better than CrN–aluminium but worse than CrN–steel system.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Comparison of the corrosion behaviour and hardness of steel samples (100Cr6) coated with titanium nitride and chromium nitride by different institutions using different deposition techniques10.1016/0921-5093(91)90487-8 ↗
2. Corrosion behaviour of hybrid coatings10.1016/S0040-6090(96)09183-3 ↗
3. Structure and mechanical properties of reactively sputtered chromium nitrides10.1016/0257-8972(91)90206-C ↗
4. The influence of substrate hardness on the response of TiN-coated steels to surface deformation10.1016/0040-6090(89)90561-0 ↗
5. Bhushan · 1997
6. Hardness measurements of thin films10.1016/0040-6090(84)90123-8 ↗
7. Absolute hardness of films and coatings10.1016/0040-6090(94)06239-H ↗
8. On the hardness of coated systems10.1016/S0257-8972(97)00522-7 ↗
9. Indentation hardness evaluation of cathodic arc deposited thin hard coatings10.1016/S0257-8972(00)01116-6 ↗
10. Vickers indentation curves of elastoplastic materials