Electron beam welding–brazing of hard alloy to steel with Ni–Fe intermediate
Source abstract
Abstract
Abstract The direct welding of hard alloy to steel by electron beam was carried out. The weld was mainly composed of molten steel. The microstructure of joint mainly consisted of the cellular dendrites and the eutectic phases. A transition layer enriched with large amounts of carbides formed at the interface of hard alloy. Finite element analysis of the welding sequence indicated that the maximum residual stress distributed at the weld or the hard alloy base metal where the macroscopic cracks tended to generate. According to the metallurgical compatibility principle, the cracks can be avoided by a powder metallurgy Ni–Fe intermediate during electron beam welding–brazing of hard alloy to steel. The microstructure of the joint was composed of (Fe,Ni) solid solution and carbides. The transition layer enriched with brittle phases did not form at the interface in the hard alloy side. Therefore, the microhardness of the weld was reduced and the compatible deformation ability of the weld was improved, and thus macroscopic cracks could be avoided.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Progress in research on welding of cemented carbide with steel
2. Research progress on brazing of cemented carbides to steels
3. Research on stress relief in the brazed YG6 cemented carbide to 40Cr steel joint
4. High-frequency induction brazing of YG8 sintered-carbide to mild steel
5. Effect of brazing temperature on the microstructure and property of vacuum brazed WC–Co and carbon steel joint
6. Effects of Cr3C2 on the microstructure and mechanical properties of the brazed joints between WC–Co and carbon steel10.1016/j.ijrmhm.2005.04.003 ↗
7. Active transient liquid phase bonding of YG6X cemented carbide to 45-Steel
8. Microstructure analysis of the TIG interface of YG30 cemented carbide and steel 45
9. Interfacial analysis of welding joint formed during TIG welding of WC–Co and carbon steel
10. On mechanism of laser welding of cemented carbides and steel
11. Research on laser welding capable of YG18 cemented carbide
12. Microstructure of electron beam weld joints between cemented carbide YG30 and carbon steel
13. Laser beam welding hard metals to steel10.1016/S0924-0136(02)00954-8 ↗
14. Analysis of formation and interfacial WC dissolution behavior of WC–Co/invar laser-TIG welded joints10.1007/s11665-012-0279-z ↗