Impurity-induced microstructural uniformity by narrowing stored energy difference between {111} and {100} grains in rolled W
Source abstract
Abstract
Abstract Orientation-dependent phenomenon, which is ubiquitous in polycrystals and proceeds from plastically anisotropy within each grain, give rise to a non-uniform microstructure evolution. This study focuses on the microstructural evolution of two as-rolled tungsten (W) with different purity: one is technical pure and one is artificially contaminated with trace C, O, N, etc. The results show that impurities can improve the microstructural uniformity during annealing, by weakening the orientation dependence of recrystallization behavior. Local EBSD characterizations provide strong supports for this proposal: firstly, while {100} and {111} grain have disparity in their slip patterns in the pure sample, it is observed intriguing similarity in the contaminated sample; secondly, the stored energy difference between {111} and {100} grains is reduced by the introduction of impurities. Additionally, the attributes of the geometrically necessary dislocations (GNDs) of both samples were also investigated. While plastically strained {111} grain accumulates more GNDs than {100} grain in pure W, the contaminated W exhibits the reduced ratio of GND density in {111} grain to {100} grain. Overall, the impurities may play the role as homogenizer in plastic behavior and subsequent microstructural evolution of polycrystalline systems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Structural reliability:a processing-dependent phenomenon10.1111/j.1151-2916.1982.tb10380.x ↗
2. Ultra-uniform nanocrystalline materials via two-step sintering10.1002/adfm.202007750 ↗
3. Pressureless two-step sintering of ultrafine-grained tungsten10.1016/j.actamat.2020.01.001 ↗
4. Theory of orientation gradients in plastically strained crystals10.1016/S1359-6454(01)00323-8 ↗
5. Plastic deformation of tungsten single crystals at low temperatures10.1016/0001-6160(66)90165-9 ↗
6. Orientation dependence of dislocation structure in surface grain of pure copper deformed in tension10.1016/j.actamat.2020.11.016 ↗
7. Orientation-dependent grain boundary characteristics in tantalum upon the change of strain path10.1016/j.matchar.2019.05.042 ↗
8. Kocks · 1998
9. Hosford · 1974
10. Texture formation in metal alloys with cubic crystal structures10.1080/02670836.2016.1231746 ↗
11. Orientation-dependent stored energies in hot deformed Al-2.5%Mg and their influence on recrystallization10.1016/j.actamat.2004.03.037 ↗
12. Orientation dependent recovery and recrystallization behavior of hot-rolled molybdenum10.1016/j.ijrmhm.2014.09.008 ↗
13. Crystallographic analysis of nucleation for random orientations in high-purity tantalum10.1557/jmr.2018.164 ↗
14. Grain orientation dependence of microstructure in aluminium deformed in tension10.1016/S1359-6462(97)00072-9 ↗
15. New discoveries in deformed metals10.1007/s11661-001-0167-x ↗
16. Dislocation structures. Part I. Grain orientation dependence10.1080/14786430701652851 ↗
17. Effect of grain boundaries and grain orientation on structure and properties10.1007/s11661-010-0292-5 ↗
18. Grain orientation and dislocation patterns10.1080/14786430600654446 ↗
19. Microstructure evolution of hot-rolled pure and doped tungsten under various rolling reductions10.1016/j.jnucmat.2020.152074 ↗
20. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
21. X-ray peak broadening studies of nanocrystalline hydroxyapatite by Williamson–Hall analysis10.1016/j.physb.2010.07.020 ↗
22. Second paper on statistics associated with the random disorientation of cubes10.1093/biomet/45.1-2.229 ↗
23. An investigation of the microstructure and ductility of annealed cold-rolled tungsten10.1016/j.actamat.2018.10.002 ↗
24. Deformation structures developing on fine scales10.1080/14786430310001605560 ↗
25. Stored energy of a severely deformed interstitial free steel10.1016/j.msea.2009.06.033 ↗
26. Largely alleviating the orientation dependence by sequentially changing strain paths10.1016/j.matdes.2016.02.084 ↗
27. Assessment of geometrically necessary dislocation levels derived by 3D EBSD10.1016/j.actamat.2015.06.051 ↗
28. Geometrically necessary, incidental and subgrain boundaries10.1016/0956-716X(91)90451-6 ↗
29. The grain size and orientation dependence of geometrically necessary dislocations in polycrystalline aluminum during monotonic deformation: relationship to mechanical behavior10.1016/j.msea.2020.138939 ↗
30. Stacking faults on {110} planes in the B.C.C. lattice10.1002/pssb.19680280218 ↗
31. First principles determination of the effects of phosphorus and boron on iron grain boundary cohesion10.1126/science.265.5170.376 ↗
32. The nature behind the preferentially embrittling effect of impurities on the ductility of tungsten10.1016/j.commatsci.2014.06.036 ↗
33. How grain boundary chemistry controls the fracture mode of molybdenum10.1016/j.matdes.2018.01.012 ↗
34. On grain boundary segregation in molybdenum materials10.1016/j.matdes.2017.09.019 ↗
35. Effect of impurities on the electronic structure of grain boundaries and intergranular cohesion in tungsten
36. Dislocation core structures of tungsten with dilute solute hydrogen10.1016/j.jnucmat.2017.09.019 ↗
37. Screw dislocation-carbon interaction in BCC tungsten: an ab initio study10.1016/j.actamat.2020.09.014 ↗
38. Structural evolutions of metallic materials processed by severe plastic deformation10.1016/j.mser.2018.06.001 ↗