journal article·2024-02

Microstructure, mechanical properties, and corrosion behavior of TiVNbZrHf high entropy alloys fabricated by multi-step spark plasma sintering

Luong Van Duong, Nguyen Quoc Thinh, Nguyen Ngoc Linh, Dang Quoc Khanh, Hyoseop Kim, Jun Woo Song, Doan Dinh Phuong

Publisher page

Abstract

The primary objective of this study was to produce a TiVNbZrHf high-entropy alloy through powder metallurgy process and characterize its properties. The effect of sintering temperature on the microstructure and mechanical properties of bulk TiVNbZrHf samples was investigated. The resulting microstructure of the bulk samples included two different phase structures: a body-centered cubic (BCC) phase with a composition rich in (Ti-V-Nb)-Hf and a hexagonal close-packed (HCP) phase with a composition rich in (Hf-Zr)-Ti. The particle size and relative density of the bulk sample increased with the rising sintering temperature. The bulk TiVNbZrHf sample exhibited the highest hardness and the lowest wear rate when sintered at 1400 °C. The corrosion resistance of the bulk samples submerged in a 3.5 wt% NaCl solution steadily improved with increasing sintering temperatures. This improvement is attributed to the increased relative density and diminished grain boundaries. Our research highlights the crucial role of precise temperature control during the sintering process to achieve the desired material properties of high-entropy alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Mechanical behavior of high-entropy alloys10.1016/j.pmatsci.2021.100777 ↗
2. High entropy materials: challenges and prospects10.3390/met11101643 ↗
3. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
4. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
5. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
6. Contrasting mechanical behavior in precipitation hardenable AlXCoCrFeNi high entropy alloy microstructures: single phase FCC vs. dual phase FCC-BCC10.1016/j.msea.2018.10.021 ↗
7. High-entropy alloys in hexagonal close-packed structure10.1007/s11661-015-3091-1 ↗
8. AlNiCrFexMo0.2CoCu high entropy alloys prepared by powder metallurgy10.1016/S1875-5372(13)60074-0 ↗
9. Effects of milling time, sintering temperature, Al content on the chemical nature, microhardness and microstructure of mechanochemically synthesized FeCoNiCrMn high entropy alloy10.1016/j.jallcom.2018.03.358 ↗
10. Microstructure and mechanical properties of sintered and heat-treated HfNbTaTiZr high entropy alloy10.3390/met9121324 ↗
11. A new type of high entropy alloy composite Fe18Ni23Co25Cr21Mo8WNb3C2 prepared by mechanical alloying and hot pressing sintering10.1016/j.msea.2018.05.022 ↗
12. Effect of hot isostatic pressing on the microstructure and mechanical properties of additive manufactured AlxCoCrFeNi high entropy alloys10.1016/j.msea.2018.07.036 ↗
13. Tailoring a refractory high entropy alloy by powder metallurgy process optimization10.3390/ma14195796 ↗
14. A novel and sustainable method to develop non-equiatomic CoCrFeNiMox high entropy alloys via spark plasma sintering using commercial commodity powders and evaluation of its mechanical behavior
15. Microstructure and mechanical properties of the TiZrNbMoTa refractory high-entropy alloy produced by mechanical alloying and spark plasma sintering10.1016/j.ijrmhm.2020.105357 ↗
16. Elucidating the effects of the composition on hydrogen sorption in TiVZrNbHf based high-entropy alloys10.1021/acs.inorgchem.0c03270 ↗
17. Thermal stability of the HfNbTiVZr high-entropy alloy10.1021/acs.inorgchem.8b02957 ↗
18. A single-phase bcc high-entropy alloy in the refractory Zr-Nb-Ti-V-Hf system10.1016/j.scriptamat.2018.04.009 ↗
19. High-entropy alloys: emerging materials for advanced functional applications10.1039/D0TA09601F ↗
20. High-strength Al0.2Co1.5CrFeNi1.5Ti high-entropy alloy produced by powder metallurgy and casting: a comparison of microstructures, mechanical and tribological properties10.1016/j.matchar.2019.110046 ↗
21. Impact of Hf content on the microstructure and mechanical properties of bulk NiCoCrAlYMoHf alloys10.1007/s10853-023-08633-x ↗
22. Sintering, microstructure, and mechanical properties of TiTaNbZrHf high-entropy alloys prepared by cold isostatic pressing and pressure-less sintering of hydrides10.3390/ma16051759 ↗
23. Competition between elements during mechanical alloying in an octonary multi-principal-element alloy system10.1016/j.jallcom.2009.03.087 ↗
24. Refractory high-entropy HfTaTiNbZr-based alloys by combined use of ball milling and spark plasma sintering: effect of milling intensity10.3390/met10091268 ↗
25. Influence of deposition temperature on the phase evolution of HfNbTiVZr high-entropy thin films10.3390/ma12040587 ↗
26. German · 2010 · 3
27. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
28. Chang · 2010
29. Phase-transformation ductilization of brittle high-entropy alloys via metastability engineering10.1002/adma.201701678 ↗
30. Ni-Cr matrix composites reinforced with nano and micron-sized surface-modified zirconia: synthesis, microstructure and mechanical properties10.1016/j.jallcom.2019.152755 ↗
31. Optimization of process parameters for the development of Ni–Al-Ti-Mn-co-Fe–Cr high entropy alloy system via spark plasma sintering10.1007/s00170-023-11311-6 ↗
32. Influence of sintering temperature on the microstructure, mechanical and tribological properties of ZrO2 reinforced spark plasma sintered Ni–Cr
33. Development of spark plasma sintered TiAlSiMoW multicomponent alloy: microstructural evolution, corrosion and oxidation resistance10.1016/j.rinp.2019.01.098 ↗
34. Influence of grain size distribution on the hall-Petch relationship of welded structural steel10.1016/j.msea.2013.10.094 ↗
35. Mechanical behavior of high-entropy alloys: a review, springer
36. Experimental and theoretical study of Ti20Zr20Hf20Nb20X20 (X=V or Cr) refractory high-entropy alloys10.1016/j.ijrmhm.2014.07.009 ↗
37. The effect of processing route on properties of HfNbTaTiZr high entropy alloy10.3390/ma12234022 ↗
38. Spark plasma sintering of gas atomized high-entropy alloy HfNbTaTiZr10.1557/jmr.2018.320 ↗
39. Microstructure and wear properties of nitrided AlCoCrFeNi high-entropy alloy10.1016/j.matchemphys.2017.05.029 ↗
40. The friction coefficient evolution of a TiN coated contact during sliding wear10.1016/j.apsusc.2015.03.156 ↗
41. Friction and wear behavior of a single-phase equiatomic TiZrHfNb high-entropy alloy studied using a nanoscratch technique10.1016/j.actamat.2018.01.014 ↗
42. Enhancing fatigue wear resistance of a bulk metallic glass via introducing phase separation: a micro-impact test analysis
43. Adjustment of hardness of (CrFeMn)x(NiyAl)1−x, (y=1,3 and x=0.6,0.72,0.80) high entropy alloys by deliberate control of intermetallic phase formation: microstructural evolution, hardness and dry-sliding wear response10.1007/s12540-020-00754-1 ↗
44. An investigation of the microstructural effects on the mechanical and electrochemical properties of a friction stir processed equiatomic CrMnFeCoNi high entropy alloy10.1016/j.jmst.2021.01.043 ↗
45. Corrosion behavior of high entropy alloys and their application in the nuclear industry—An overview10.3390/met13020363 ↗
46. Effect of Ti content on the microstructure and corrosion resistance of CoCrFeNiTix high entropy alloys prepared by laser cladding10.3390/ma13102209 ↗
47. Design and properties of novel Ti–Zr Hf–Nb–Ta high-entropy alloys for biomedical applications10.1016/j.intermet.2021.107421 ↗
48. Synthesis and corrosion behavior of Mo15Nb20Ta10Ti35V20 refractory high entropy alloy10.1016/j.matdes.2023.111820 ↗
49. Microstructure and corrosion behavior of FeNiCoCrCu and FeNiCoCrMn high entropy alloys manufactured by powder metallurgy in different acid media10.1016/j.jmrt.2020.12.016 ↗
50. Surface degradation mechanisms in a eutectic high entropy alloy at microstructural length-scales and correlation with phase-specific work function10.1038/s41529-019-0079-0 ↗
51. Microstructural, mechanical and tribological behavior of powder metallurgy processed SiC and RHA reinforced Al-based composites10.1016/j.surfin.2019.03.002 ↗