journal article·2017-06

Tantalum foams prepared by the thermal dealloying process

Grzegorz Adamek

Publisher page

Abstract

Abstract The paper presents a promising method of Ta–based foams preparation by the thermal dealloying method. The concept of the foams formation was to remove one of the alloying elements from the tantalum alloy under high temperature. This element was magnesium that has a relatively low boiling temperature (1090 °C). Ta-20 wt%Ti and Ta-30 wt%Ti alloys, of the melting temperatures of approx. 2400 °C and 2200 °C respectively were investigated. The first step of this study was the Ta-Ti-Mg alloys preparation using the mechanical alloying process. The next step was forming the green compacts by cold pressing and then sintering and dealloying at the same time. The influence of the sintering/dealloying parameters on the porous structure formation was investigated. The sintering stage was done in vacuum at 1500 °C. During the dealloying process, the magnesium diffuses from the middle to the surface of the sample, leaving open spaces surrounded by a metallic scaffold. The tantalum foam with high porosity and wide pore size distribution was successfully prepared. The above results clearly show a great potential of thermal dealloying in metallic foam formation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Davies · 2003
2. The effect of structural design on mechanical properties and cellular response of additive manufactured titanium scaffolds10.3390/ma5081336 ↗
3. Niinomi · 2010
4. Processing of biomedical porous foam of Ti and Mg10.1016/S1359-6462(01)01132-0 ↗
5. Compression temperature and binder ratio on a process for fabrication of open-celled porous Ti10.1016/j.materresbull.2009.12.002 ↗
6. Recent advances in bone tissue engineering scaffolds10.1016/j.tibtech.2012.07.005 ↗
7. Qualitative interfacial study between bone and tantalum, niobium or commercially pure titanium10.1016/0142-9612(90)90010-N ↗
8. Biocompatibility and osteogenesis of refractory metal implants, titanium, hafnium, niobium, tantalum and rhenium10.1016/S0142-9612(00)00275-1 ↗
9. Erosion–corrosion of stainless steels, titanium, tantalum and zirconium10.1016/j.wear.2004.09.023 ↗
10. Bonding of alkali- and heat-treated tantalum implants to bone10.1002/(SICI)1097-4636(2000)53:1<28::AID-JBM4>3.0.CO;2-F ↗
11. Manufacture, characterisation and application of cellular metals and metal foams10.1016/S0079-6425(00)00002-5 ↗
12. Characterization of Ti-6Al-4V alloy foams synthesized by space holder technique10.1016/j.msea.2011.01.008 ↗
13. Porous Ti6Al4V scaffold directly fabricating by rapid prototyping: preparation and in vitro experiment10.1016/j.biomaterials.2005.08.033 ↗
14. Processing of titanium foams using magnesium spacer particles10.1016/j.scriptamat.2006.11.010 ↗
15. Tantalum foam made with sucrose as a space holder10.1016/j.ijrmhm.2015.04.012 ↗
16. Characteristics of bone ingrowth and interface mechanics of a new porous tantalum biomaterial10.1302/0301-620X.81B5.9283 ↗
17. Fibrous tissue ingrowth and attachment to porous tantalum10.1002/1097-4636(20001215)52:4<631::AID-JBM7>3.0.CO;2-6 ↗
18. Tissue response to porous tantalum acetabular cups: a canine model10.1016/S0883-5403(99)90062-1 ↗
19. Experimental and clinical performance of porous tantalum in orthopedic surgery10.1016/j.biomaterials.2006.04.041 ↗
20. Porous tantalum structures for bone implants: fabrication, mechanical and in vitro biological properties10.1016/j.actbio.2010.01.046 ↗
21. Mechanical alloying of Ti-20Ta-20Nb-(10-20)Mg alloys10.12693/APhysPolA.126.871 ↗