Comparative studies on densification behavior, microstructure, mechanical properties and oxidation resistance of Mo-12Si-10B and Mo3Si-free Mo-26Nb-12Si-10B alloys
Source abstract
Abstract
Abstract Two bulk Mo-Si-B based alloys (Mo-12Si-10B and Mo-26Nb-12Si-10B (at.%), abbreviated as 0Nb and 26Nb alloy respectively) were fabricated by mechanical alloying and then hot pressing. Comparative studies were carried out on the densification behavior, microstructure, room-temperature fracture toughness, elevated temperature compression and oxidation resistance of these two alloys. The results showed that alloy 0Nb was composed of (Mo), Mo3Si and Mo5SiB2, while alloy 26Nb was free of Mo3Si and had higher (Mo) content and a little γNb5Si3. Compared to the alloy 0Nb, alloy 26Nb presented better compactibility, higher room-temperature fracture toughness (8.84 ± 0.17 vs. 6.77 ± 0.20 MPa·m1/2) and elevated temperature compression strength (851.7 ± 11.7 vs. 644.2 ± 10.2 MPa) but worse oxidation resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. The hotter the engine, the better10.1126/science.1179327 ↗
2. Mo-Si-B alloys: developing a revolutionary turbine-engine material10.1557/mrs2003.191 ↗
3. Assessment of a powder metallurgical processing route for refractory metal silicide alloys10.1007/s11661-005-0165-5 ↗
4. Mo-Si-B alloys for ultrahigh-temperature structural applications10.1002/adma.201200764 ↗
5. Improvement of the oxidation-proof property and the scale structure of Mo3Si intermetallic alloy through the addition of chromium and aluminum elements10.1016/j.intermet.2006.01.059 ↗
6. Transient oxidation of Mo-Si-B alloys: effect of the microstructure size scale10.1016/j.actamat.2009.06.036 ↗
7. Oxidation performance of Mo3Si with Al additions10.1016/j.corsci.2008.12.004 ↗
8. Boron-doped molybdenum silicides for structural applications10.1016/S0921-5093(98)01045-4 ↗
9. Deformation of a multiphase Mo-9.4Si-13.8B alloy at elevated temperatures10.1016/S0966-9795(00)00098-4 ↗
10. Phase stability and structural defects in high-temperature Mo-Si-B alloys10.1016/j.actamat.2008.07.015 ↗
11. Effect of Nb and W substitutions on the stability of the A15 Mo3Si phase10.1016/j.jallcom.2012.04.109 ↗
12. Microstructure and oxidation behavior of Nb-Mo-Si-B alloys10.1016/j.intermet.2005.03.007 ↗
13. Oxidation behavior of multiphase Nb-Mo-Si-B intermetallics10.1007/s11661-005-0175-3 ↗
14. Effects of Nb content on the mechanical alloying behavior and sintered microstructure of Mo-Nb-Si-B alloys10.3390/met9060653 ↗
15. Spark plasma sintering of a commercially available granulated zirconia powder: I. sintering path and hypotheses about the mechanism(s) controlling densification10.1016/j.actamat.2007.01.048 ↗
16. Processing and mechanical properties of a molybdenum silicide with the composition Mo-12Si-8.5B (at.%)10.1016/S0966-9795(00)00093-5 ↗
17. Comparisons of the densification, microstructure and mechanical properties of boron carbide sintered by hot pressing and spark plasma sintering10.1016/j.ceramint.2017.10.230 ↗
18. Effects of pressure on densification behaviour, microstructures and mechanical properties of boron carbide ceramics fabricated by hot pressing10.1016/j.ceramint.2017.02.043 ↗
19. Densification and grain growth behaviour of high-purity MgO ceramics by hot-pressing10.1016/j.ceramint.2016.10.129 ↗
20. Hot-pressing kinetics and densification mechanisms of boron carbide10.1111/jace.13483 ↗
21. Densification of nanocrystalline MgO ceramics by hot-pressing10.1016/j.jeurceramsoc.2004.09.023 ↗
22. Solidification of Bcc/T1/T2 three-phase microstructure in Mo-Nb-Si-B alloys10.1016/j.intermet.2016.01.001 ↗
23. Improvement in the ductility of molybdenum alloys due to grain boundary segregation10.1016/S1359-6462(01)01242-8 ↗
24. Optimization of Mo-Si-B intermetallic alloys10.1007/s11661-005-0166-4 ↗
25. Mechanically alloyed Mo-Si-B alloys with a continuous α-Mo matrix and improved mechanical properties10.1016/j.intermet.2008.04.015 ↗
26. The influence of silicon on the strength and fracture toughness of molybdenum10.1016/j.msea.2006.07.153 ↗
27. High temperature deformation of A15 Mo3Si single crystals10.1016/S1359-6462(02)00360-3 ↗
28. Mechanical properties of Mo5SiB2 single crystals10.1016/S0921-5093(01)01575-1 ↗
29. Improving the fracture toughness of constituent phases and Nb-based in-situ composites by a computational alloy design approach10.1007/s11661-003-0149-2 ↗
30. Oxidation behaviour of the Mo-Si-B and Mo-Si-B-Al alloys in the temperature range of 700-1300 °C10.1016/j.intermet.2007.02.012 ↗
31. The development of protective borosilicate layers on a Mo-3Si-1B (weight percent) alloy10.1007/s11661-005-0011-9 ↗
32. Oxidation mechanisms in Mo-reinforced Mo5SiB2(T2)-Mo3Si alloys10.1016/S1359-6454(02)00039-3 ↗
33. Mechanisms of oxide scale formation on yttrium-alloyed Mo-Si-B containing fine-grained microstructure10.1016/j.corsci.2014.09.017 ↗
34. Oxidation mechanisms of lanthanum-alloyed Mo-Si-B10.1016/j.corsci.2014.07.058 ↗