journal article·2018-09

Ternary W-Ni-Fe tungsten heavy alloys: A first principles and experimental investigations

Ashish Pathak, Ashutosh Panchal, T.K. Nandy, A.K. Singh

Publisher page

Abstract

Abstract Present work describes the mechanical behaviour of three virtual alloy systems comprising of matrix phase and W grains with fcc-bcc interface. The properties are evaluated for a composite tungsten heavy alloy. The compositions of the matrix phase have been considered similar to different tungsten heavy alloys (WHAs). The energy of the alloy systems decreases with increase in W contents. The lattice parameters of the matrix phase of WHAs are good agreement with those of the matrix phase of the virtual systems. The values of lattice constant, strength parameters (0.2 and 9% strain) and modulus increase with increase in W content. The nature of theoretical stress – strain curves of systems are similar to typical experimental ones. The addition of W increases the strength values and also shifts flow behaviour with higher strengths as function of strain. The yielding starts in typical WHAs in matrix phase only.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Brandes · 1992
2. Reactive sintering of porous tungsten: a cost effective sustainable technique for the manufacturing of high current density cathodes to be used in flash lamps10.1016/j.jmatprotec.2005.05.037 ↗
3. Tensile and impact behaviour of swaged tungsten heavy alloys processed by liquid phase sintering10.1016/j.ijrmhm.2012.10.002 ↗
4. Processing strategy for consolidating tungsten heavy alloys for ordnance applications10.1016/S0254-0584(00)00426-0 ↗
5. Microstructure and mechanical properties of mechanically alloyed and solid-state sintered tungsten heavy alloys10.1016/S0921-5093(00)00968-0 ↗
6. Heating rate effects on microstructural properties of liquid phase sintered tungsten heavy alloys10.1016/j.ijrmhm.2004.01.006 ↗
8. M. A. Janney, O. O. Omatete, Method for moulding ceramic powders using a water-based gelcasting, US pat. No. 5 028 362, July 2, 1991.
9. M.A. Janney, Method for moulding ceramic powder, USPat.No.4,894,194,Jan 16, 1990.
10. Gelcasting: a new ceramic forming process
11. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗
12. S. H. Hong, H. J. Ryu, Combination of mechanical alloying and two-stage sintering of a 93W−5.6Ni−1.4Fe tungsten heavy alloy, Mater. Sci. Eng. A, 344 (2003) 253–260.10.1016/S0921-5093(02)00410-0 ↗
13. Fracture behaviour of W-Ni-Fe alloys10.1007/BF02645119 ↗
14. Inhomogeneous Electron gas10.1103/PhysRev.136.B864 ↗
15. Self-consistent equations including exchange and correlation effects10.1103/PhysRev.140.A1133 ↗
16. QUANTUM ESPRESSO: a modular and open-source software project for quantum simulations of materials10.1088/0953-8984/21/39/395502 ↗
17. Soft self-consistent pseudopotentials in a generalized Eigen value formalism10.1103/PhysRevB.41.7892 ↗
18. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
19. Fast radix 2, 3, 4 and 5 kernels for fast Fourier transformations on computers with overlapping multiply – add instructions10.1137/S1064827595281940 ↗
20. Iterative minimization techniques for ab initio total-energy calculations:molecular dynamics and conjugate gradients10.1103/RevModPhys.64.1045 ↗
21. Towards a potential-based conjugate gradient algorithm for order-N self-consistent total energy calculations10.1103/PhysRevB.54.4383 ↗
22. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
23. Quantum–mechanical theory of stress and force10.1103/PhysRevB.32.3780 ↗
24. Erratum: Quantum–mechanical theory of stress and force10.1103/PhysRevB.35.9308 ↗
25. The effect of managanese addition on the microstructure of W–Ni–Fe heavy alloy10.1007/s11661-999-0054-4 ↗
26. Fe–Ni–W Iron–Nickel–Tungsten10.1007/BF02647634 ↗
27. Tensile flow behaviour of tungsten heavy alloys produced by CIPing and gelcasting routes10.1007/s11661-018-4590-7 ↗
28. Deshmukh · 2017
29. Effect of tungsten content on microstructure and mechanical properties of swaged tungsten heavy alloys10.1016/j.msea.2013.06.041 ↗
30. Tensile behaviour change depending on the varying tungsten content of W-Ni-Fe alloys10.1016/j.ijrmhm.2006.12.003 ↗
31. Analysis of high tungsten content heavy alloys, powder metallurgy in