Microstructure evolution and properties of laser cladding Nb containing eutectic high entropy alloys
Source abstract
Abstract
High entropy alloys (HEAs), as new structural alloys, are expected to achieve their breakthrough application in the field of laser additive repair. In this work, Al 0.5 CoCrFeNiNb x (x = 0, 0.2, 0.4, 0.6, 0.8, 1.0) high-entropy alloy coatings (HEAcs) were prepared on the surface of H13 (4Cr5MoSiV1) steel using laser cladding (LC) technology, and the effects of Nb content on the hardness and wear resistance of Al 0.5CoCrFeNi HEAcs were investigated. The phase composition, microstructure, and element distribution of the coatings were characterized, respectively. The results showed that the Al 0.5 CoCrFeNi HEAcs mainly consisted of the face-centered cubic (FCC) phase, and the addition of Nb promoted the generation of laves phase. The addition of Nb achieved the transformation of the internal microstructure from sub-eutectic to eutectic and then to hyper-eutectic. The coatings containing Nb show significant grain refinement, a gradual increase in hardness, and a significant improvement in wear resistance. The wear mechanism was mainly fatigue wear and abrasive wear.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Case study and design of steel set support for aged belt entry rehabilitation10.1016/j.ijmst.2017.12.025 ↗
2. Influence of deposition patterns on distortion of H13 steel by wire-arc additive manufacturing10.3390/met11030485 ↗
3. Application of nanoparticles in cast steel: an overview10.1007/s41230-020-0037-z ↗
4. Wear resistance of H13 and a new hot-work die steel at high temperature10.1007/s11665-016-2124-2 ↗
5. Laser additive manufacturing of metallic components: materials, processes and mechanisms
6. Microstructure and high temperature properties of laser cladded WTaNbMo refractory high entropy alloy coating assisted with ultrasound vibration10.1016/j.jallcom.2022.165888 ↗
7. Microstructure performance enhancement of Si3N4 reinforced laser clad KF110 base composite coatings10.1111/ijac.13904 ↗
8. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
9. Microstructure evolution, texture and laser surface HEACs of Al-mg-Si alloy for light automobile parts10.1016/j.matchar.2019.110093 ↗
10. Controlled formation of coherent cuboidal nanoprecipitates in body-centered cubic high-entropy alloys based on Al2(Ni Co, Fe, Cr)14 compositions10.1016/j.actamat.2018.01.050 ↗
11. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system10.1016/j.actamat.2013.09.037 ↗
12. Ductile and ultrahigh-strength eutectic high-entropy alloys by large-volume 3D printing10.1016/j.jmst.2022.04.004 ↗
13. Seaweed eutectic-dendritic solidification pattern in a CoCrFeNiMnPd eutectic high-entropy alloy10.1016/j.intermet.2017.02.004 ↗
14. Simultaneous strength-ductility enhancement of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy by cryo-rolling and annealing
15. Microstructure and mechanical properties of CoCrFeNiZrx eutectic high-entropy alloys10.1016/j.matdes.2017.08.030 ↗
16. Y/Hf-doped AlCoCrFeNi high-entropy alloy with ultra-oxidation and spallation resistance10.1016/j.corsci.2019.108426 ↗
17. Microstructures and compressive properties of multicomponent AlCoCrFeNiMox alloys
18. Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys10.1016/j.intermet.2012.03.005 ↗
19. Microstructure, kinetics and thermodynamics of HEA Al0.5CoCrFeNi at T ≥ 800 °C
20. The FCC to BCC phase transformation kinetics in an Al0.5CoCrFeNi high entropy alloy10.1016/j.jallcom.2017.03.249 ↗
21. Solid-solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
22. Prediction of high-entropy stabilized solid-solution in multi-component alloys10.1016/j.matchemphys.2011.11.021 ↗
23. Microstructure and high temperature erosion behavior of laser cladded CoCrFeNiSi high entropy alloy coating10.1016/j.surfcoat.2021.127218 ↗
24. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
25. Al0.5FeCoCrNi high entropy alloy prepared by selective laser melting with gas-atomized pre-alloy powders10.1016/j.msea.2018.10.035 ↗
26. Designing rules of laser-clad high-entropy alloy coatings with simple solid solution phases10.1007/s40195-020-01040-0 ↗
27. Designing eutectic high entropy alloys of CoCrFeNiNbx10.1016/j.jallcom.2015.09.153 ↗
28. Strengthening mechanism in two-phase FeCoCrNiMnAl high entropy alloy coating10.1016/j.apsusc.2020.147205 ↗
29. Direct solidification of bulk ultrafine-microstructure eutectic high-entropy alloys with outstanding thermal stability10.1016/j.scriptamat.2019.02.035 ↗
30. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
31. Deformation behaviors and cyclic strength assessment ofAZ31B magnesium alloy based on steady ratcheting effect10.1016/j.msea.2018.03.023 ↗
32. Selective laser melting of an equiatomic AlCrCuFeNi high-entropy alloy: processability, non-equilibrium microstructure and mechanical behavior10.1016/j.jallcom.2018.08.290 ↗
33. In-situ high-resolution transmission electron microscopy investigation of grain boundary dislocation activities in a nanocrystalline CrMnFeCoNi high-entropy alloy10.1016/j.jallcom.2017.03.194 ↗
34. Microstructure and Wear resistance of laser clad CoCrFeNiTiNbBx high entropy alloy coatings10.1007/s11666-021-01270-3 ↗
35. Tribological properties of AlCrCuFeNi2 high-entropy alloy in different conditions10.1007/s11661-016-3396-8 ↗
36. Microstructure and wear properties of nitrided AlCoCrFeNi high-entropy alloy10.1016/j.matchemphys.2017.05.029 ↗
37. Effect of isothermal quenching on microstructure and hardness of GCr15 steel10.1016/j.jmrt.2021.09.096 ↗
38. Microstructures and wear resistance of CoCrFeNi2V0.5Tix high-entropy alloy coatings prepared by laser cladding10.3390/cryst10050352 ↗
39. Synthesis and characterization of AlCoCrFeNiNbx high-entropy alloy coatings by laser cladding10.3390/cryst9010056 ↗
40. CoCrFeNi(W1-x Mox) high-entropy alloy coatings with excellent mechanical properties and corrosion resistance prepared by mechanical alloying and hot pressing sintering10.1016/j.matdes.2016.12.076 ↗
41. Tribological behaviors and mechanisms of Ti3AlC210.1007/s11249-007-9202-4 ↗
42. Oxide-film-dependent tribological behaviors of Ti3SiC210.1016/j.wear.2006.11.003 ↗