Effect of refractory elements on boronizing properties of the CoCrFeNi high entropy alloy
Source abstract
Abstract
Abstract The chemical composition of high entropy alloys (HEAs) is complex and HEAs contain a wide variety of alloying elements. The aim of this study was to investigate the effect of refractory elements (Ti, Nb) content on the boronizing behavior of CoCrFeNi alloys. The X-ray Diffractometer (XRD) analysis showed that boride layers containing Ni2Si, FeB, Fe2B, Co2B and Cr5B3 phases. In addition to this, TiB2 and NbB2 phases were detected on CoCrFeNiTi and CoCrFeNiNb alloys, respectively. The content of Ti and Nb in alloys resulted in decrease in boride layer (BL) thickness, which was measured for, CoCrFeNi, CoCrFeNiTi and CoCrFeNiNb as 70 μm, 7 μm and 4.3 μm respectively. Si atoms which were accumulated close to BL and Si atoms were not transferred into substrates. Therefore, it was concluded that the BL prevented the transition of Si atoms. The interface of the BL having smooth morphology was identified on alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Boriding (boronizing)
2. Effect of boronizing temperature and time on microstructure and abrasion wear resistance of Cr12Mn2V2 high chromium cast iron10.1016/j.surfcoat.2008.06.170 ↗
3. Effects of Nb additions on the microstructure and mechanical property of CoCrFeNi high-entropy alloys10.1016/j.intermet.2015.01.004 ↗
4. Growth kinetics and abrasive wear resistance of boride layers on Fe-15Cr alloy10.1179/026708310X12683157551577 ↗
5. The pack-boronizing of pure vanadium under a controlled atmosphere10.1016/j.apsusc.2010.06.013 ↗
6. Pack-boriding of low alloy steel: microstructure evolution and migration behaviour of alloying elements10.1080/14786435.2019.1680890 ↗
7. Boriding of Fe and Fe-C, Fe-Cr, and Fe-Ni alloys - boride-layer growth-kinetics10.1557/JMR.1989.1354 ↗
8. Effects of alloying elements on the growth of Iron boride coatings10.1007/BF01729165 ↗
9. Kinetics of borided 31CrMoV9 and 34CrAlNi7 steels10.1016/j.matchar.2006.10.007 ↗
10. Microstructure, Growth Kinetics, and Abrasive Wear Resistance of Boride Layers on Fe-30% Cr Alloy10.1007/s11106-013-9463-4 ↗
11. Characterisation of boride layer formed on Fe-Mo binary alloys10.1080/02670844.2016.1148322 ↗
12. Effect of titanium on the boronizing behaviour of pure iron10.1016/j.surfcoat.2008.07.009 ↗
13. The effect of vanadium on the boronizing properties of pure iron10.1016/j.surfcoat.2013.01.034 ↗
14. Influence of manganese on pack boriding behaviour of pure iron10.1179/1743294411Y.0000000010 ↗
15. Microstructural characterisation of borided binary Fe-W alloys10.1080/02670844.2016.1263712 ↗
16. Surface modification of Fe-8Si alloy by boronizing and its characterization
17. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
18. A review of the serrated-flow phenomenon and its role in the deformation behavior of high-entropy alloys
19. Enhanced strength-ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae10.1038/s41467-019-08460-2 ↗
20. Fatigue behavior of a wrought Al0.5CoCrCuFeNi two-phase high-entropy alloy10.1016/j.actamat.2015.07.004 ↗
21. Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi10.1038/ncomms10143 ↗
22. The effect of molybdenum on the corrosion behaviour of the high-entropy alloys Co1.5CrFeNi1.5Ti0.5Mox in aqueous environments10.1016/j.corsci.2010.04.004 ↗
23. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
24. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
25. Tensile properties of high- and medium-entropy alloys10.1016/j.intermet.2013.03.018 ↗
26. Surface hardening of FCC phase high-entropy alloy system by powder-pack boriding10.1016/j.surfcoat.2018.10.017 ↗
27. Successful boronizing of nickel-based alloys
28. Microstructure analysis of boronized pure nickel using boronizing powders with SiC as diluent10.1016/j.vacuum.2009.06.048 ↗
29. Characterization of boronized layers on Vanadis 6 tool steel
30. Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys10.1016/j.actamat.2013.04.058 ↗
31. A diffusion model for describing the bilayer growth (FeB/Fe2B) during the iron powder-pack boriding10.1016/j.apsusc.2005.01.016 ↗
32. Surface strengthening in Al0.25CoCrFeNi high-entropy alloy by boronizing10.1016/j.matlet.2018.12.029 ↗