Effects of oxygen on microstructure and evolution mechanism of body-centred-cubic molybdenum
Source abstract
Abstract
Abstract Molybdenum metal have high brittleness and ductile-to-brittle transition temperature (DBTT) due to the existence of interstitial oxygen impurities, so it is of great scientific significance to strictly control and accurately analyze the oxygen content. In this work, the effects of oxygen on microstructure and evolution mechanism of body-centred-cubic metallic molybdenum are studied. The X-Ray diffraction (XRD), oxygen nitrogen analyzer, scanning electron microscope (SEM), energy dispersive spectrometer (EDS) and electron probe micro-analyzer (EPMA) are used to analyze the chemical composition, microstructure, oxygen existence and distribution form. The results demonstrate that Mo O specimens with up to 3300 ppm of oxygen content have single-phase body-centered cubic microstructure with no precipitates. When the oxygen content in molybdenum increases from 44 ppm to 2200– 3300 ppm, more oxygen exists in the pores between molybdenum grains, and the fracture mode changes from intergranular fracture to intergranular and transgranular mixed fracture. The microhardness increases with increase of oxygen content. These results provide new ideas for controlling the change trend of oxygen in molybdenum and regulating the properties of molybdenum.
Source: openaire · Quality: candidate unverified · Source record ↗
References (48)
Show source-provided references
1. The chemistry of deformation: how solutes soften pure metals10.1126/science.1118616 ↗
2. Space fission reactor structural materials: choices past, present, and future
3. Operating temperature windows for fusion reactor structural materials10.1016/S0920-3796(00)00320-3 ↗
4. Influence of impurities on hot-rolled molybdenum for high temperature applications10.1016/j.ijrmhm.2020.105294 ↗
5. Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility10.1038/nmat3544 ↗
6. Effect of plastic bending on high temperature creep resistance of molybdenum single crystals10.1016/j.ijrmhm.2020.105461 ↗
7. Creep microstructures and creep behaviors of pure molybdenum sheet at 0.7 tm10.1016/j.ijrmhm.2016.06.021 ↗
8. Microstructure and texture evolution of pure molybdenum during hot deformation10.1016/j.matchar.2019.110010 ↗
9. A new regime for mechanical annealing and strong sample-size strengthening in body centred cubic molybdenum10.1038/ncomms1557 ↗
10. Investigation of stress-strain response, microstructure and texture of hot deformed pure molybdenum10.1016/j.ijrmhm.2018.02.011 ↗
11. Fracture behavior of the La-doped molybdenum-titanium-zirconium alloy10.1016/j.msea.2019.05.031 ↗
12. Effect of secondary phases on the strength and elongation of a novel Mo-TiC-ZrC-C alloy10.1016/j.ijrmhm.2020.105336 ↗
13. Secondary phases formation in lanthanum-doped titanium-zirconium-molybdenum alloy10.1016/j.jallcom.2018.05.103 ↗
14. La2O3 effects on TZM alloy recovery, recrystallization and mechanical properties10.1016/j.msea.2015.03.114 ↗
15. Intrinsic intergranular brittleness of molybdenum
16. Recent advances in aerospace refractory metal alloys10.1179/imr.1988.33.1.131 ↗
17. Densification and grain growth during isothermal sintering of Mo and mechanically alloyed Mo-TZM10.1016/j.actamat.2009.05.013 ↗
18. Improvement in the ductility of molybdenum alloys due to grain boundary segregation10.1016/S1359-6462(01)01242-8 ↗
19. Evaluation of oxide dispersion strengthened (ODS) molybdenum and molybdenum-rhenium alloys10.1016/S0263-4368(00)00028-7 ↗
20. Grain boundary segregation engineering in as-sintered molybdenum for improved ductility10.1016/j.scriptamat.2018.07.008 ↗
21. On grain boundary segregation in molybdenum materials10.1016/j.matdes.2017.09.019 ↗
22. Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes10.1038/s41586-018-0685-y ↗
23. Effect of oxygen and nitrogen on microstructure and mechanical properties of vanadium10.1016/j.msea.2016.08.040 ↗
24. Oxygen solutes induced anomalous hardening, toughening and embrittlement in body-centered cubic vanadium10.1016/j.actamat.2020.06.023 ↗
25. Effect of oxygen on microstructure and mechanical properties of niobium10.1016/j.msea.2013.01.025 ↗
26. Mechanism of hardening and damage initiation in oxygen embrittlement of body-centred-cubic niobium10.1016/j.actamat.2019.02.030 ↗
27. Designing solid solution hardening to retain uniform ductility while quadrupling yield strength10.1016/j.actamat.2019.08.024 ↗
28. Microstructure and mechanical behavior of superelastic Ti-24Nb-0.5O and Ti-24Nb-0.5N biomedical alloys10.1016/j.jmbbm.2012.01.017 ↗
29. Mechanisms of deformation in gum metal TNTZ-O and TNTZ titanium alloys: a comparative study on the oxygen influence10.1016/j.actamat.2011.06.006 ↗
30. The microstructure and texture evolution of pure molybdenum sheets under various rolling reductions10.1016/j.matchar.2020.110357 ↗
31. Adsorption and diffusion of oxygen on metal surfaces studied by first-principle study: a review
32. Characteristics of quadruplet Ti–Mo–TiB2–TiC composites prepared by spark plasma sintering10.1016/j.ceramint.2020.05.137 ↗
33. Wear behavior of self-propagating high-temperature synthesized cu-TiO2 nanocomposites10.53063/synsint.2021.1332 ↗
34. Post hot rolling of spark plasma sintered Ti-Mo-B4C composites10.1016/j.msea.2020.140214 ↗
35. Phase relations in refractory metal-oxygen systems10.1111/j.1151-2916.1969.tb09158.x ↗
36. Phase Equilibria, crystallographic and thermodynamic date of binary alloys
37. Electron probe microanalysis: a review of recent developments and applications in materials science and engineering10.1016/j.pmatsci.2020.100673 ↗
38. Influence of molybdenum content on the microstructure of spark plasma sintered titanium alloys10.53063/synsint.2021.1114 ↗
39. Pressureless sinterability study of ZrB2-SiC composites containing hexagonal BN and phenolic resin additives10.53063/synsint.2021.1231 ↗
40. Role of Ti3AlC2 MAX phase on characteristics of in-situ synthesized TiAl intermetallics, Part I: sintering and densification10.53063/synsint.2021.1347 ↗
41. Degassing and Deoxidation processes during sintering of unalloyed and alloyed PM steels
42. Nanoindentational and conventional mechanical properties of spark plasma sintered Ti–Mo alloys10.1016/j.jmrt.2020.07.066 ↗
43. Effect of B4C content on sintering behavior, microstructure and mechanical properties of Ti-based composites fabricated via spark plasma sintering10.1016/j.matchemphys.2020.123087 ↗
44. Ab-initio study of paramagnetic defects in Mn and Cr doped transparent polycrystalline Al2O3 ceramics
45. Microwave-specific enhancement of the carbon-carbon dioxide (Boudouard) reaction10.1021/jp4076965 ↗
46. Chemical reactions during sintering of PM steel compacts as a function of the alloying route10.1080/00325899.2018.1458489 ↗
47. Sintering of ferrous metallic compacts: chemical reactions that involve interstitial elements10.1111/jace.16039 ↗
48. The role of oxygen transfer in sintering of low alloy steel powder compacts: a review of the “internal getter” effect