Synthesis of Y2O3-doped WC-Co powders by wet chemical method and its effect on the properties of WC-Co cemented carbide alloy
Source abstract
Abstract
WC-8Co composite powders doped with Y 2O 3 were prepared by wet chemical method, and the densification of alloy proceeded by spark plasma sintering at 1200 °C, 1250 °C, and 1300 °C. The microstructure of the composite powders and alloys was analyzed by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, and high-resolution transmission electron microscopy. Result showed that the addition of Y 2O 3 could refine WC particles during carbonization and WC grains during sintering. In the microstructure of WC-Co alloys, Y 2O 3 solidly dissolved in the body of WC crystal with the form of the second-phase nanocrystal. Moreover, the effect of sintering temperature on WC-8Co cemented carbide doped with Y 2O 3 was studied. The comprehensive performance of WC-8Co cemented carbide doped with Y 2O 3 was best at the sintering temperature of 1250 °C with the hardness of 19.64 GPa and fracture toughness of 11.97 MPa m 1/2.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Fabrication and cutting performance of reactively hot-pressed TiB2-TiC-SiC ternary cutting tool in hard turning of AISI H13 steel10.1007/s00170-016-9789-4 ↗
2. Cutting performance of a functionally graded cemented carbide tool prepared by microwave heating and nitriding sintering10.1515/htmp-2019-0011 ↗
3. Cobalt oxide as a raw material for the production of WC-Co cemented carbides and its advantages for the pressing process10.1016/j.ijrmhm.2017.12.004 ↗
4. Effect of VC addition on preparation and mechanical properties of nanocrystalline WC-Co alloys
5. Mechanical properties and microstructure of spark plasma sintered WC-8wt.%Co-VC-cBN ultrafine grained cemented carbide10.1016/j.ceramint.2019.08.078 ↗
6. Microwave-assisted synthesis of vanadium and chromium carbides nanocomposite and its effect on properties of WC-8Co cemented carbides10.1016/j.scriptamat.2016.04.024 ↗
7. Effects of ZrC and SiC addition on the microstructures and mechanical properties of binderless WC10.1016/j.ijrmhm.2017.09.002 ↗
8. ZrO2 (3Y) toughened WC composites prepared by spark plasma sintering10.1016/j.jallcom.2013.03.259 ↗
9. Influence of Ni and ZrO2 contents on sintering and mechanical properties of WC-2wt.%ZrO2-1wt.%Ni composites10.1016/j.ceramint.2019.02.198 ↗
10. Effects of Y2O3 addition on microstructures and mechanical properties of WC-Co functionally graded cemented carbides10.1016/j.ijrmhm.2014.11.004 ↗
11. Tungsten carbide platelet-containing cemented carbide with yttrium containing dispersed phase10.1016/S1003-6326(08)60019-9 ↗
12. Isotropic thermal conductivity in rolled large-sized W-Y2O3 bulk material prepared by powder metallurgy route and rolling deformation technology10.1016/j.fusengdes.2018.10.009 ↗
13. Microstructure and properties of Y2O3-doped steel-cemented WC prepared by microwave sintering10.1007/s12598-013-0131-0 ↗
14. Spark plasma sintering on nanometer scale WC-Co powder10.1016/j.matlet.2005.04.002 ↗
15. Hardness to toughness relationship of fine-grained WC-Co hardmetals10.1016/S0263-4368(98)00028-6 ↗
16. Effect mechanism of arsenic on the growth of ultrafine tungsten carbide powder10.1016/j.apt.2018.02.030 ↗
17. Fabrication of ultrafine and high-purity tungsten carbide powders via a carbothermic reduction-carburization process10.1016/j.jallcom.2019.01.055 ↗
18. Effect of cobalt on the synthesis and sintering of WC-Co composite powders10.1016/j.jallcom.2018.06.367 ↗
19. Growth mechanisms of WC in WC-5.75 wt% Co10.1016/j.ceramint.2011.06.016 ↗
20. Local grain growth in cemented carbide sintering
21. Effect of nano-yttria addition on the properties of WC/Co composites10.1016/j.matdes.2013.05.034 ↗
22. Y2O3- and NbC-doped ultrafine WC-10Co alloys by low pressure sintering10.1016/j.ijrmhm.2009.12.008 ↗
23. Microstructure and properties of ultrafine cemented carbides-differences in spark plasma sintering and sinter-HIP10.1016/j.msea.2012.05.065 ↗
24. Temperature dependent elastic and thermal expansion properties of W3Co3C, W6Co6C and W4Co2C ternary carbides10.1016/j.jallcom.2016.01.061 ↗
25. Morphology of eta phase in cemented carbides with Fe-based binders influenced by carbon content and nitrogen atmosphere10.1016/j.ceramint.2019.07.063 ↗
26. Dvornik · 2015 · 1 · 45
27. Studying of sintered WC-8Co powder with coatings of aluminum oxide produced by atomic layer deposition
28. The influence of various re:co ratios on microstructures and properties of WC-co-re cemented carbides10.1016/j.matlet.2019.04.055 ↗