journal article·2023-12

Formation of core-rim structure and interface toughening mechanism in cast WC- FeCoNiCrMo (HEA) based composite materials

Lihan Gao, Zhixing Guo, Changhua Chen, Zhongwei Wang, Daojun Zhang, Hao Peng, Ji Xiong, Guang Xian, Junbo Liu

Publisher page

Abstract

The aim of the work is to improve the toughness of cast WC-based composite material by introducing FeCoNiCrMo high-entropy alloy (HEA) into the system. The results indicated that a circular ‘diffusion layer’ formed on the surface of cast WC after HEA addition, resulting in a ‘core-rim’ structure. During the pressureless infiltration process, decomposition of cast WC occurs and the carbon element reacts with Mo in HEA forming Mo 2C, and the other elements such as Co, Fe and Ni react with Mo and W forming (Fe, Co, Ni) 3Mo 3C type carbon-deficient phase. The composition of the ‘diffusion layer’ is mainly HEA content, but the binder is enriched in Ni and rare in Mo regardless of HEA addition level. With the increase of HEA addition, formation of irregular island-shaped structure can be seen in the Cu binder phase. Due to the core-rim structure, the grain size of cast WC can be reduced and the hardness of the composite is improved. The bonding energy of WC (0001) -Mo 2C (0001) and WC (10 1 ¯ 0) -Mo 2 C (0001) interfaces is evaluated using DFT calculation, which 7.975 eV and 6.480 eV and higher than that of WC-Cu interface in composite without HEA addition. FEM analysis reveals that the interfacial residual stress is alleviated due to the existence of the diffusion layer. In composite without HEA addition, the cracks initiated in the cast WC phase mainly propagates along the ceramics-metal interface, resulting in debonding and early fracture. The crack propagation mode shows much difference after the formation of core-rim structure, which indicate the toughening by HEA addition. When the crack propagates towards the interface, the crack does not propagate along the interface, but passes through the interface area and quickly stops propagating. Therefore, the interface toughness is improved after HEA addition.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Sintered diamond: a synthetic carbonado10.1126/science.169.3948.868 ↗
2. Polycrystalline diamond compact with enhanced thermal stability10.1016/j.jmst.2017.03.014 ↗
3. Recent advances in superhard materials10.1146/annurev-matsci-070115-031649 ↗
4. Preparation of diamond10.1038/1841094a0 ↗
5. Improved vacuum tribological properties of sintered polycrystalline diamond compacts treated by high temperature annealing10.1016/j.carbon.2017.09.039 ↗
6. Materials: ultrahard polycrystalline diamond from graphite10.1038/421599b ↗
7. WC–TiC–Ni cemented carbide with enhanced properties10.1016/j.jallcom.2007.10.132 ↗
8. Characterization and properties of MTCVD Ti(C,N) coated cemented carbide substrates with Fe/Ni binder10.1016/j.ijrmhm.2009.10.004 ↗
9. Effects of partial substitution of copper for cobalt on the microstructure and properties of ultrafine-grained WC-Co cemented carbides10.1016/j.jallcom.2017.11.006 ↗
10. Comparative investigation of the Ni and the Fe effect on the structure and mechanical response of a WC-W-Ni hardmetal obtained by infiltration10.1016/j.ijrmhm.2018.11.002 ↗
11. Microstructural evolution and mechanical properties of TiC-containing WC-based cemented carbides prepared by pressureless melt infiltration10.1016/j.ceramint.2022.08.107 ↗
12. Impact of Ce2O3 on microstructure and properties of matrix-body for PDC drill bits synthesized via pressureless melt infiltration10.1016/j.ceramint.2022.06.006 ↗
13. Tribological properties of copper alloy-based composites reinforced with tungsten carbide particles10.1016/j.wear.2011.01.015 ↗
14. Microstructure and properties of ZrC–W composite fabricated by reactive infiltration of Zr2Cu into WC/W preform10.1016/j.matchemphys.2014.12.029 ↗
15. Microstructure and mechanical properties of novel tungsten heavy alloys prepared using FeNiCoCrCu HEA as binder10.1016/j.msea.2021.142451 ↗
16. Fabrication and characterization of WC-HEA cemented carbide based on the CoCrFeNiMn high entropy alloy10.1016/j.jallcom.2018.02.292 ↗
17. Fabrication and mechanical properties of AlCoNiCrFe high-entropy alloy particle reinforced Cu matrix composites10.1016/j.jallcom.2015.07.125 ↗
18. On the application of NbTaTiVW refractory high entropy alloy particles in the manufacturing process of WC based matrix body drill bits
19. Effect of WC content on microstructures and mechanical properties of FeCoCrNi high-entropy alloy/WC composite coatings by plasma cladding10.1016/j.surfcoat.2019.125326 ↗
20. Microstructures and wear behaviour of (FeCoCrNi)1-x(WC)x high entropy alloy composites10.1016/j.ijrmhm.2018.03.019 ↗
21. Investigation on the interface characteristic between WC(001) and diamond(111) by first-principles calculation10.1016/j.diamond.2022.108864 ↗
22. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases10.1016/j.actamat.2016.06.063 ↗
23. Anomalous decrease in X-ray diffraction intensities of Cu–Ni–Al–Co–Cr–Fe–Si alloy systems with multi-principal elements10.1016/j.matchemphys.2007.01.003 ↗
24. Improved corrosion resistance of air plasma sprayed WC-12%Co cermet coating by laser re-melting process10.1016/j.matlet.2017.01.010 ↗
25. Microstructure and magnetic properties of NiCrMoAl/WC coatings by laser cladding: effect of WC metallurgical behaviors10.1016/j.surfcoat.2018.07.021 ↗
26. The study of ternary carbides formation during SPS consolidation process in the WC-Co-steel system10.1016/j.ijrmhm.2009.05.001 ↗
27. Influence of Mn additions on the microstructure and magnetic properties of FeNiCr/60% WC composite coating produced by laser cladding10.1016/j.ijrmhm.2014.05.010 ↗
28. Hardmetals prepared from WC-W2C eutectic particles and AlCrFeCoNiV high entropy alloy as a binder10.1016/j.vacuum.2021.110630 ↗
29. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
30. Solid-solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
31. Phase stability in high entropy alloys: formation of solid-solution phase or amorphous phase10.1016/S1002-0071(12)60080-X ↗
32. Entropy-driven phase stability and slow diffusion kinetics in an Al0.5CoCrCuFeNi high entropy alloy10.1016/j.intermet.2012.07.001 ↗
33. Concentration-dependent atomic mobilities in FCC CoCrFeMnNi high-entropy alloys10.1016/j.actamat.2018.12.033 ↗
34. High-entropy alloys: diffusion
35. Ni tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys10.1016/j.jallcom.2016.07.239 ↗
36. Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys10.1016/j.actamat.2013.04.058 ↗
37. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
38. Theoretical calculation of absolute radii of atoms and ions. Part 1. The atomic radii10.3390/i3020087 ↗