Microstructure and mechanical properties of TiC–TiN based cermets for tools application
Source abstract
Abstract
The objective of this work is to develop materials with both a good hardness and a good toughness. Titanium carbonitride has a significant hardness (2000Hv), but its toughness (6 MPa√m) is insufficient for tools applications. Toughness can be improved by addition of a metallic binder. Cermets based on TiC and TiN with Ni as binder are the most developed materials. In the present work, the effect of TiN addition and binder content on the microstructure and the properties of the TiC based cermets elaborated by pressureless sintering have been investigated. Results show that dense cermets with specific core/rim structure have been obtained. The rupture strength and the toughness increase with the addition of Ni. The optimum values of mechanical properties were found for the cermet with 15 wt% Ni and 10 wt% TiN addition, respectively, which exhibits a Vickers hardness over 1400 Hv0.3 and a fracture toughness around 13.6 MPa√m.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Ti(C, N) cermets-metallurgy and properties10.1016/0263-4368(95)00027-G ↗
2. Some physical and metal cutting properties of titanium carbonitride base materials
3. Sinterability of carbide–nitride phases of titanium in high pressure conditions10.1016/S0924-0136(96)02561-7 ↗
4. Advances in modern nitrogen-containing hardmetals and cermets10.1016/S0263-4368(00)00016-0 ↗
5. Spark-plasma-sintering (SPS) of nanostructured titanium carbonitride powders10.1016/j.jeurceramsoc.2004.06.008 ↗
6. Solid state properties of group IVb carbonitrides10.1016/0925-8388(94)01315-9 ↗
7. Hardness and elastic properties of Ti(CxN1−x), Zr(CxN1−x) and Hf(CxN1−x)10.1016/S0925-8388(00)01057-4 ↗
8. Titanium carbonitride-based cermets: processes and properties10.1016/0921-5093(93)90588-6 ↗
9. Advanced TiC and TiN based cermets
10. TiMoCN based cermets Part II. Microstructure and room temperature mechanical properties10.1016/S0263-4368(03)00011-8 ↗
11. Fundamentals of liquid phase sintering for modern cermets and functionally graded cemented carbonitrides (FGCC)10.1016/S0263-4368(00)00041-X ↗
12. Microstructure and tribo-mechanical properties of ultrafine Ti(CN) cermets10.1016/S0263-4368(02)00004-5 ↗
13. Formation of core:rim structures in Ti(C, N)–WC–Ni cermets via a dissolution and precipitation process10.1111/j.1151-2916.2000.tb01415.x ↗
14. Microstructure of hot pressed Ti(C, N)-based cermets10.1016/S0955-2219(02)00120-6 ↗
15. Phase evolution and microstructure characteristics of ultrafine Ti(C, N)-based cermet by spark plasma sintering10.1016/j.ijrmhm.2004.03.002 ↗
16. Spark plasma sintering of Ti(C, N) cermets with intermetallic binder phases10.1016/j.ijrmhm.2006.03.004 ↗
17. Hot pressed titanium nitride obtained from SHS starting powders: influence of a pre-sintering heat-treatment of the starting powders on the densification process10.1016/j.jeurceramsoc.2006.02.032 ↗
18. Effect of green state on the sintering of Ti(C, N)-based cermets10.1016/0924-0136(95)01914-6 ↗
19. Indentation fracture of WC–Co cermets10.1007/BF00555296 ↗
20. Titanium–carbonitride-based hard alloys for cutting tools10.1016/0025-5416(88)90724-0 ↗
21. Critical review on the elastic properties of transition metal carbides, nitrides and carbonitrides10.1016/S0925-8388(97)00297-1 ↗
22. TiC and Ti (C, N) cermet microstructures
23. Influence of titanium nitride addition on the microstructure and mechanical properties of TiC-based cermets10.1016/j.ijrmhm.2005.05.008 ↗
24. On the disappearance of Mo2C during low-temperature sintering of Ti(C, N)–Mo2C–Ni cermets10.1023/A:1004603422252 ↗
25. Effect of TiC/TiN powder size on microstructure and properties of Ti(C, N)-based cermets10.1016/j.msea.2006.10.003 ↗