journal article·2026-12

Binder chemistry as a lever: Co/Ni compositional tuning for η-phase suppression in high-entropy cermets

Haiyu Li, Zhiyao Ouyang, Yuchen Zhang, Na Jin, Qiang Liu, Jinwen Ye

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

References (51)

Show source-provided references
1. Research progress and application prospect of high entropy carbide and high entropy carbonitride ceramics10.1016/j.ceramint.2025.10.461 ↗
2. Synthesis of novel single-phase high-entropy metal carbonitride ceramic powders10.1016/j.ijrmhm.2020.105390 ↗
3. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
4. Efficient single-step mechanosynthesis route of nanostructured Hf0.2Nb0.2Ta0.2V0.2Zr0.2C0.5N0.5 high entropy carbonitride powder10.1016/j.ceramint.2024.04.347 ↗
5. Tuning anionic components to control the phase stability and mechanical properties of high-entropy carbonitrides10.1016/j.matdes.2025.113775 ↗
6. C/N ratio effects on mechanical, thermodynamic and electronic properties of (TiTaZrHf)C1-xNx high-entropy carbonitride ceramics: a comprehensive first-principles study10.1016/j.jmrt.2026.04.133 ↗
7. Low temperature synthesis and densification of (Ti,V,Nb,Ta,Mo)(C,N) high-entropy carbonitride ceramics10.1016/j.jallcom.2022.167095 ↗
8. Regulating nitrogen fraction, phasic composition and mechanical properties in (Ti0.2V0.2Nb0.2Ta0.2W0.2)(CxNy) high-entropy ceramic via carbon stoichiometry10.1016/j.jeurceramsoc.2024.02.034 ↗
9. Preparation of novel high entropy carbonitride composites with high toughness10.1016/j.ceramint.2025.04.259 ↗
10. Synthesis and thermal insulation properties of (Ti1/5V1/5Mo1/5Nb1/5Ta1/5) (C0.55N0.45) high-entropy carbonitride porous ceramic10.1016/j.ceramint.2024.06.367 ↗
11. Six-principal-component high-entropy carbonitride aerogel thermal insulator: theoretical and experimental studies10.1111/jace.20027 ↗
12. Disentangling the oxidation mechanisms of high-entropy carbonitrides10.1016/j.corsci.2025.112850 ↗
13. High-entropy carbonitrides with superior oxidation resistance: fabrication and investigation of oxidation behavior under non-isothermal and isothermal conditions10.1016/j.jeurceramsoc.2024.116980 ↗
14. A comparative study on the oxidation behaviour of NbC-Ni, WC-Co, and high entropy carbide-Ni based cermets10.1016/j.ijrmhm.2024.106832 ↗
15. Preparation and mechanical properties of (Ti0.2Zr0.2V0.2Nb0.2Ta0.2)(C0.6N0.4)-Co high-entropy cermets10.1016/j.matchar.2022.112213 ↗
16. Synthesis, microstructure, and properties of novel series of (Ti, W, Mo, Nb, Ta) (C0.78, N0.22) high entropy ceramic-based cermets10.1016/j.ceramint.2023.11.312 ↗
17. Low-temperature fabrication of high-entropy carbonitride based cermets10.1016/j.jallcom.2025.185356 ↗
18. Liquid phase assisted synthesis of (Ti,V,Nb,Ta,W)C-Ni high entropy carbide cermets by conventional pressureless sintering10.1016/j.ijrmhm.2022.105914 ↗
19. Wetting and interfacial behavior of Fe, Co, Ni on (Ti, Zr, Hf, Nb, Ta)C high entropy ceramics10.1016/j.oceram.2023.100393 ↗
20. Low-temperature sintering mechanization of high-entropy (W,Nb,Mo,Ta, Ti)C cermet via spark plasma coupled high-frequency induction sintering10.1016/j.ceramint.2024.01.408 ↗
21. Microstructure and mechanical properties of cellular (Ti,M)(C,N)-based cermets fabricated by pre-granulation and subsequent vacuum sintering10.1016/j.ijrmhm.2024.106822 ↗
22. High performance (Ti, Ta, Nb, V, Zr)(C, N) cermets: balancing fracture toughness and wear resistance10.1016/j.matchar.2026.116351 ↗
23. Fabrication of (Ti,W,Mo,Ta,Nb)(C,N)-Co cermet tools and its performance in turning nodular cast iron10.1016/j.ceramint.2025.01.464 ↗
24. Thermal shock induced evolution of microstructure and mechanical properties in ultrafine-grained tungsten alloys10.1016/j.ijrmhm.2026.107651 ↗
25. Cemented carbide microstructures: a review10.1016/j.ijrmhm.2018.12.004 ↗
26. Influence of varying carbon content in (V,Nb,Ta,Ti,W)C high entropy carbide- Ni based cermets on densification, microstructure, mechanical properties and phase stability10.1016/j.ceramint.2022.11.121 ↗
27. Effect of carbon content and metal binder type on phase composition in high-entropy carbide-based hardmetals10.1016/j.ijrmhm.2025.107611 ↗
28. Facile synthesis of high entropy carbide-nickel based cermets by in-situ carbo-thermal reduction of transition metal oxides10.1016/j.actamat.2024.119924 ↗
29. The wear behavior of (Ti, W, Mo, Cr) (C, N)-based cermet under a wide load range10.1016/j.ijrmhm.2025.107122 ↗
30. Microstructural evolution and properties of Ti(C,N)-based cermets: role of (Ti0.8W0.05Mo0.05Ta0.05Hf0.05)(C,N) multicomponent carbonitride additions10.1016/j.ijrmhm.2026.107812 ↗
31. Influence of metal element types on the density, phase purity, and mechanical properties of high entropy carbide ceramics10.1016/j.ijrmhm.2025.107578 ↗
32. Regulating microstructures and mechanical properties of (Ti0.2V0.2Nb0.2Ta0.2W0.2)C-Co high-entropy cermet in vacuum-pressure sintering10.1016/j.ijrmhm.2025.107246 ↗
33. Tuning microstructure for superb mechanical properties in a Ti(C, N)-(WMoTaNbTi)C-Ni/co cermets via change sintering temperature10.1016/j.ijrmhm.2024.106801 ↗
34. Entropy-driven elemental diffusion and microstructural evolution in Co-based composites reinforced with high-entropy carbonitrides10.1016/j.ijrmhm.2026.107679 ↗
35. Tuning interfacial wettability in high-entropy cemented carbides for enhanced mechanical performance10.1111/jace.20317 ↗
36. Influence of different binder metals in high entropy carbide based hardmetals10.1080/00325899.2022.2076311 ↗
37. Super-hard yet tough and self-lubricating (TiZrHfNbTa)CxNy high entropy carbonitride films deposited by magnetron sputtering10.1016/j.surfcoat.2025.132241 ↗
38. Microstructure, mechanical and tribological behavior of CrHfNbTaTiCxNy high-entropy carbonitride coatings prepared by double glow plasma alloy10.1016/j.wear.2023.204751 ↗
39. Exceptionally wear resistant (W0.2Mo0.2Ta0.2Nb0.2Ti0.2)(C0.75N0.25) high entropy carbonitride10.26599/JAC.2025.9221127 ↗
40. Effect of varying carbon content on microstructural evolution and mechanical properties of (TiZrHf)cx-Ni cermets10.1111/jace.70134 ↗
41. Single-phase formation process and carbon vacancy regulation of10.15541/jim20240477 ↗
42. Studying the effects of vacancy structures on helium trapping and desorption in TiC by first-principles methods10.1016/j.commatsci.2025.114385 ↗
43. Anionic vacancy filled-up mechanism in (Ti 0.2 V 0.2 Nb 0.2 Ta 0.2 W 0.2 )C x high-entropy carbide10.1016/j.jeurceramsoc.2024.116887 ↗
44. Fracture toughness of cemented carbides: testing method and microstructural effects10.1016/j.ijrmhm.2014.08.018 ↗
45. Effect of CoCrFeNiMn HEA binder on microstructure and mechanical properties of (TiNbTaZrHf)CxN1-x-based high-entropy cermets10.1016/j.ceramint.2025.01.463 ↗
46. Enhancement effects of FeCoNiCrMn high-entropy alloy doping on the Ti(C, N)-based cermets: microstructure and mechanical properties10.1016/j.ijrmhm.2024.106695 ↗
47. Low-temperature fabrication of high-entropy carbonitride based cermets10.1016/j.jallcom.2025.185356 ↗
48. Self-consistent equations including exchange and correlation effects10.1103/PhysRev.140.A1133 ↗
49. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
50. Ab initio molecular dynamics for liquid metals10.1103/PhysRevB.47.558 ↗
51. Ab initio molecular-dynamics simulation of the liquid-metal-amorphous-semiconductor transition in germanium10.1103/PhysRevB.49.14251 ↗