Mechanical properties and microstructure of Al2O3/Ti(C,N)/CaF2@Al2O3 self-lubricating ceramic tool
Source abstract
Abstract
Abstract Due to the poor mechanical properties of solid lubricants, direct addition to the ceramic matrix will reduce the mechanical properties of the material. In this study, Al(OH)3 was coated on the surface of nano CaF2 by non-uniform nucleation method and added to Al2O3/Ti(C,N) ceramic matrix. Al2O3/Ti(C,N)/CaF2@Al2O3 was prepared by vacuum hot pressing sintering. Compared with the material directly added with nano-solid lubricant, the mechanical properties of ceramic tools added with coated nano-solid lubricant have been significantly improved. Among them, when the content of coated nano-solid lubricant is 10 vol%, the ceramic material has better comprehensive mechanical properties. SEM observation shows that the cross-sectional particle distribution of nano-coated powder ceramic material is relatively uniform and has good compactness. The fracture mode of ceramic materials is a mixed fracture mode of intergranular fracture and transgranular fracture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Wear behaviour of alumina based ceramic cutting tools on machining steels10.1016/j.triboint.2005.01.021 ↗
2. Dry machining: machining of the future10.1016/S0924-0136(00)00445-3 ↗
3. Self-lubrication of sintered ceramic tools with CaF2 additions in dry cutting10.1016/j.ijmachtools.2005.07.047 ↗
4. Self-lubrication of nitride ceramic coating by the chlorine ion implantation10.1016/S0257-8972(03)00929-0 ↗
5. Properties and preparation of micro-textured self-lubricating ceramic materials by in-situ molding process
6. Formulated self-lubricating carbon coatings on carbide ceramics10.1016/j.wear.2010.11.015 ↗
7. Al2O3/(W,Ti)C/CaF2, multi-component graded self-lubricating ceramic cutting tool material10.1016/j.ijrmhm.2014.04.006 ↗
8. Friction reducion mechanism of Al2O3/TiC/CaF2 self - lubricating ceramic tools in machining processes10.3901/JME.2006.07.109 ↗
9. Wear process and analysis of lubrication failure about sputtering MoS2 composite solid films applied to spacecraft10.4028/www.scientific.net/AMM.275-277.1671 ↗
10. Friction and wear properties of bronze–graphite composite under water lubrication10.1016/j.triboint.2003.12.013 ↗
11. Phase reactions and chemical stability of ceramic carbide and solid lubricant particulate additions within sintered high speed steel matrix10.1179/pom.1993.36.4.267 ↗
12. Self-lubricating composites for extreme environmental conditions
13. Solid lubricant materials for high temperatures—a review10.1016/0301-679X(82)90089-5 ↗
14. Self-lubricating composites of porous nickel and nickel-chromium alloy impregnated with barium fluoride-calcium fluoride eutectic10.1080/05698196608972150 ↗
15. Some topographical and tribological characteristics of a CaF2/BaF2 eutectic-containing porous nichrome alloy self-lubricating composite10.1080/05698197508982760 ↗
16. High-temperature tribological behavior of ZrO2–MoS2–CaF2, self-lubricating composites10.1016/j.jeurceramsoc.2012.08.003 ↗
17. Self-lubrication of Al2O3/TiC/CaF2, ceramic composites in sliding wear tests and in machining processes10.1016/j.matdes.2005.12.003 ↗
18. Kong · 2013 · 64
19. Tribological behaviour of Si3N4–BN ceramic materials for dry sliding applications10.1016/S0043-1648(02)00219-3 ↗
20. Finite element design and fabrication of Al2O3/TiC/CaF2, gradient self-lubricating ceramic tool material10.1016/j.ceramint.2014.03.101 ↗
21. Composition design and mechanical properties of mixed (Ce,Y)-TZP ceramics obtained from coated starting powders10.1016/j.jeurceramsoc.2004.07.003 ↗
22. Self-lubricating ceramic cutting tool material with the addition of nickel coated CaF2, solid lubricant powders10.1016/j.ijrmhm.2015.12.003 ↗
23. Mechanical properties and microstructure of Al2O3/TiC based self-lubricating ceramic tool with CaF2@Al(HO)310.1016/j.ijrmhm.2018.04.001 ↗
24. Design and preparation of high-performance alumina functional graded self-lubricated ceramic composites10.1016/j.compositesb.2012.09.090 ↗
25. A novel design to produce high-strength and high-toughness alumina self-lubricated composites with enhanced thermal-shock resistance—part I: Mechanical properties and thermal shock behavior of Al2O3/Mo-Al2O3, laminated composites10.1016/j.jeurceramsoc.2016.08.016 ↗
26. Synthesis of (h-BN)/SiO2, core–shell powder for improved self-lubricating ceramic composites10.1016/j.ceramint.2015.12.102 ↗
27. Hot-pressed Al2O3/SiC whiskery TiC nanocomposites
28. Toughening effect of ZrB2, in Al2O3-ZrB2, nanocomposite ceramics10.1016/S1875-5372(16)30146-1 ↗
29. Formation of intragranular nano-structures in micro-sized ceramic composite materials10.1016/j.msea.2008.02.029 ↗
30. Effect of Nano-sized CaF2 on Mechanical Properties of Self-lubricating Ceramic Material