Effects of Ni addition on mechanical properties and corrosion behaviors of coarse-grained WC-10(Co, Ni) cemented carbides
Source abstract
Abstract
Abstract The effects of the Ni content on the mechanical properties and corrosion behavior of coarse-grained WC-10Co cemented carbide, with a grain size of 3.5 μm, were investigated using scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), electrochemical measurements, and mechanical property tests. The results indicate that the strength and toughness are improved with the addition of 2 wt% Ni without sacrificing hardness. Furthermore, the existence of Ni can decrease the corrosion current density (icorr) of WC-10Co cemented carbide in both 0.1 M HCl and 0.1 M NaOH solutions. The SEM and XPS results reveal that only a minor amount of WO3 formed in the corroded surface in HCl solution. The corrosion behavior was determined by the dissolution of the binder phase, and Ni can develop the charge-change resistance (Rct). Contrarily, the Co binder phase were oxidized to a dense passive film (Co(OH)2 and Co3O4) in NaOH solution, and the addition of Ni was conducive to the enhancement of the diffusion resistance (Rf). This may give insights into adding an appropriate Ni content in coarse-grained WC-Co cemented carbide, in which the wear and corrosion of the components coexist.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Synthesis, sintering, and mechanical properties of nanocrystalline cemented tungsten carbide -a review10.1016/j.ijrmhm.2008.07.011 ↗
2. Influences of the preparation methods of WC-Co powders on the sintering and microstructure of coarse grained WC-8Co hardmetals10.1016/j.ijrmhm.2014.10.012 ↗
3. Synthesis of ultrafine WC-Co composite powders under hydrogen atmosphere with in situ carbon via a one-step reduction-carbonization process10.1111/ijac.12628 ↗
4. Effects of TaC on microstructure and mechanical properties of coarse grained WC-9Co cemented carbides10.1016/S1003-6326(15)63715-3 ↗
5. Binder phase structure in fine and coarse WC-Co hard metals with Cr and V carbide additions10.1016/j.ijrmhm.2013.04.001 ↗
6. Influence of Ru additions on the corrosion behaviour of WC-Co cemented carbide alloys in sulphuric acid10.1016/j.ijrmhm.2011.02.007 ↗
7. Corrosion behavior of WC-Co hardmetals in the oil-in-water emulsions containing sulfate reducing Citrobacter sp10.1016/j.corsci.2015.01.036 ↗
8. The influence of pH on sliding wear of WC-based materials10.1016/S0263-4368(00)00007-X ↗
9. Electrochemical corrosion behaviors of straight WC-Co alloys: exclusive variation in grain sizes and aggressive media10.1016/j.ijrmhm.2016.02.009 ↗
10. TEM and ToF-SIMS studies on the corrosion behavior of vanadium and chromium containing WC-Co hard metals in alkaline solutions10.1016/j.ijrmhm.2011.01.008 ↗
11. Effect of adding method of Cr on microstructure and properties of WC-9Ni-2Cr cemented carbides10.1016/j.ijrmhm.2012.11.010 ↗
12. Effects of Ni on the microstructures and properties of WC-6Co cemented carbides fabricated by WC-6(Co, Ni) composite powder10.1016/j.ceramint.2014.10.165 ↗
13. Effect of Cu, Ni on the property and microstructure of ultrafine WC-10Co alloys by sinter-hipping10.1016/j.ijrmhm.2011.02.012 ↗
14. Some speculations on an increase of WC-Co cemented carbide service life under dynamic loads10.1016/S0263-4368(02)00090-2 ↗
15. Influence of different post treatments on microstructure and properties of WC-Co cemented carbides10.1016/j.jallcom.2014.09.100 ↗
16. Evolution of the WC grain shape in WC-Co alloys during sintering: effect of C content10.1016/j.ijrmhm.2008.06.001 ↗
17. Deformation characteristics of WC micropillars10.1016/j.jeurceramsoc.2014.05.045 ↗
18. Physical and chemical nature of cemented carbides
19. Microabrasion of WC–Co hardmetals in corrosive media10.1016/j.wear.2003.09.003 ↗
20. Use of FIB/SEM to assess the tribo-corrosion of WC/Co hardmetals in model single point abrasion experiments10.1016/j.triboint.2012.11.008 ↗
21. Influence of TiC additions on the corrosion behaviour of WC-Co hardmetals in alkaline solution10.1016/j.ijrmhm.2014.05.009 ↗
22. Electrochemical behavior of cobalt in aqueous solutions of different pH10.1023/A:1003893122201 ↗
23. The evaluation of tribo-corrosion synergy for WC–Co hardmetals in low stress abrasion10.1016/j.wear.2003.04.001 ↗