Dynamic stored energy gradient induced oriented growth of subgrains in rapidly hot-extruded tungsten heavy alloys
Source abstract
Abstract
Abstract Highly oriented lath-like subgrains decorated by numerous dislocation tangles and dislocation-free irregular grains were observed to prevail in a heavily hot-extruded fine-grained 93 W-4.9Ni-2.1Fe (wt.%) alloy. Except for such lath-like subgrains, there were also a considerable number of equiaxed strain-free grains visible in an extruded coarse-grained 93 W-4.9Ni-2.1Fe alloy. A mechanism in terms of a new concept designated as dynamic stored energy gradient was proposed to illustrate the formation of the lath-like subgrains that were actually created in extremely short time (only around 0.3 s) during hot extrusion. Due to the limited extrusion time, thermally activated diffusion of tungsten atoms was unlikely to play a decisive role in this process. It is found that there has been a significant driving force gradient at the growth front of the subgrains, which is believed to substantially promote directional annihilation of edge dislocation dipoles to develop the lath-shaped configuration of the subgrains in the extruded alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Microstructure and mechanical properties of a hot- hydrostatically extruded 93W-4.9Ni-2.1Fe alloy
2. Microstructure and highly enhanced mechanical properties of fine-grained tungsten heavy alloy after one-pass rapid hot extrusion10.1016/j.msea.2011.01.070 ↗
3. Dynamic recrystallization mechanisms of an Fe–8% Al low density steel under hot rolling conditions10.1016/j.scriptamat.2012.07.037 ↗
4. Grain refinement due to complex twin formation in rapid hot forging of magnesium alloy10.1016/j.scriptamat.2012.10.007 ↗
5. Kinetics of flow and strain-hardening10.1016/0001-6160(81)90112-7 ↗
6. A unified phenomenological description of work hardening and creep based on one-parameter models10.1016/0001-6160(84)90202-5 ↗
7. On the mechanisms of work hardening and flow-stress saturation10.1016/S1359-6462(00)00363-8 ↗
8. On the mechanisms of dynamic recovery10.1016/S1359-6462(02)00235-X ↗
9. Modeling the initiation of dynamic recrystallization using a dynamic recovery model10.1016/j.jallcom.2011.07.014 ↗
10. Validation of a model for static and dynamic recrystallization in metals10.1016/j.ijplas.2011.12.006 ↗
11. Effect of matrix alloy and cold swaging on micro-tensile properties of tungsten heavy alloys10.1016/j.matlet.2005.08.050 ↗
12. Densification behavior of nanocrystalline W-Ni-Fe composite powder prepared by sol-spray drying and hydrogen reduction process10.1016/j.jallcom.2009.09.050 ↗
13. Hull · 2001
14. Humphreys · 2004
15. Controlling factors for the brittle-to-ductile transition in tungsten single crystals10.1126/science.282.5392.1293 ↗
16. Self-diffusion in tungsten10.1103/PhysRevB.18.6566 ↗
17. Theory of dislocation cell size in deformed metals10.1016/0025-5416(82)90086-6 ↗
18. The recrystallization process in some polycrystalline metals10.1098/rspa.1962.0080 ↗