Mössbauer characterisation and physical property measurements of Fe and FeNi bonded NbC cermets
Source abstract
Abstract
Niobium carbide cermets have shown promising results in wear resistant applications, specifically as cutting tools. There is limited information available on the magnetic and physical properties of NbC with alternate metal binders. In this study, NbC cermets with 12 wt% Fe and FeNi binders were produced by liquid phase sintering and compared to Co and Ni binder NbC cermets. The effects of 4 wt% Mo 2C additive to the various metal binder NbC cermets were also evaluated. The magnetic, electrical and thermal properties have been investigated using Mӧssbauer spectroscopy and a Physical Property Measurement System. The Mössbauer spectrum shows the presence of ferromagnetic phases in the binder for the NbC-12Fe grades, with magnetic fields ranging from 29.4 T to 33.1 T. The NbC-12FeNi spectrum is dominated by a paramagnetic phase with a minor ferromagnetic component. The addition of molybdenum carbide to NbC-FeNi results in only a paramagnetic structure which is most likely a gamma-FeNi phase compared to NbC-Fe where the spectrum is dominated by ferromagnetic behaviour. Vibrating sample magnetometer measurements show weak ferromagnetic structures in all the cermet grades at room temperature (300 K). At 2 K, multiple fields were observed exhibiting strong ferromagnetic behaviour. The addition of Mo 2C to the NbC cermets with the various metal binders reduces the magnetic field, except for the NbC-Fe grade where no change in the field strength is observed. The thermal conductivity for the NbC cermets at room temperature varies between 25 and 46 W/K.m which is significantly lower than WC-Co hardmetals (120 W/K.m).
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Potentials of niobium carbide (NbC) as cutting tools and for wear protection10.1016/j.ijrmhm.2018.01.009 ↗
2. Effect of different binders and secondary carbides on NbC cermets10.1007/s10010-022-00583-1 ↗
3. Machine learning based prediction of mechanical properties of WC-co cemented carbides from magnetic data only10.1016/j.ijrmhm.2024.106665 ↗
4. Microstructures of cemented carbides10.1016/S0261-3069(01)00006-1 ↗
5. W content in Co binder during sintering of WC-Co10.1016/S1359-6454(97)00459-X ↗
6. A comparative study of microstructure and magnetic properties of a Ni–Fe cemented carbide: influence of carbon content10.1016/j.ijrmhm.2019.01.014 ↗
7. Bennett
8. Study on machining characteristics of WEDM with ultrasonic vibration and magnetic field assisted techniques10.1016/j.jmatprotec.2016.04.007 ↗
9. An eco-friendly pulsed magnetic field treatment on cemented carbide (WC–12Co) for enhanced milling performance10.1016/j.jclepro.2022.130748 ↗
10. Gütlich · 2010
11. Dickson · 1986
12. A Mössbauer spectroscopy study of Fe based cemented carbides10.1016/j.ijrmhm.2019.105127 ↗
13. Microstructure, mechanical and machining properties of LPS and SPS NbC cemented carbides for face-milling of grey cast iron10.1016/j.ijrmhm.2017.12.036 ↗
14. Influence of microstructure on hardness and thermal conductivity of hardmetals10.1016/j.ijrmhm.2019.105170 ↗
15. Thermal properties of cemented carbides used for metal cutting10.1016/j.ijrmhm.2022.106097 ↗
16. Spreadsheet based analysis of Mössbauer spectra10.1007/s10751-016-1271-z ↗
17. Thermal conductivity and electrical resistivity of cemented transition-metal carbides at low temperatures10.1111/j.1151-2916.1991.tb04121.x ↗
18. Hummel · 2012
19. Iron(III) oxides from thermal processes-synthesis, structural and magnetic properties, Mössbauer spectroscopy characterization, and applications10.1021/cm0111074 ↗
20. Investigation on the reaction of iron powder mixture as a portable heat source for thermoelectric power generators10.1007/s10973-013-3619-9 ↗
21. Influence of carbon content and processing treatment of metallic binder on the outgassing and sintering of NbC based cemented carbide10.1016/j.ceramint.2020.07.347 ↗
22. Influence of niobium impurity on spin density in metallic iron
23. Systems of niobium monocarbide with transition metals10.1016/0022-5088(72)90145-2 ↗
24. Thermodynamics of Fe-Ti-C and Fe-Nb-C austenites and nonstoichiometric titanium and niobium carbides10.1016/B978-0-08-036234-2.50007-6 ↗
25. Mössbauer spectroscopy of Fe-Ni and Fe-Pt alloys10.1016/0304-8853(79)90185-9 ↗
26. Mössbauer and x-ray study of mechanically alloyed Fe-Ni alloys around the invar composition10.1088/0953-8984/20/48/485204 ↗
27. Geballe · 1966 · vol. 2 · 293
28. Tutorial: a beginner’s guide to interpreting magnetic susceptibility data with the Curie-Weiss law10.1038/s42005-022-00853-y ↗
29. Ledwig · 2021
30. Physical and chemical nature of cemented carbides10.1179/imtr.1979.24.1.149 ↗
31. Influence of alternative hard and binder phase compositions in hardmetals on thermophysical and mechanical properties10.3390/met13111803 ↗
32. Understanding low-temperature magnetization curves with law of approach to saturation in Co0.5Zn0.5Fe2O410.1007/s10854-022-09042-7 ↗
33. Study of thermal expansion and thermal conductivity of cemented WC-co composite10.1016/j.ijrmhm.2014.06.009 ↗
34. NbC-based cermets: influence of secondary carbide addition and metal binder
35. Sintering behavior and microstructural evolution of NbC-Ni cemented carbides with Mo2C additions10.1016/j.ijrmhm.2020.105295 ↗