journal article·2018-04

Response of a molybdenum alloy to plasma nitriding

Zhenxue Zhang, Xiaoying Li, Hanshan Dong

Publisher page

Abstract

Abstract A molybdenum alloy (TZM: 0.50 wt% titanium, 0.08 wt% zirconium and 0.02 wt% carbon with balanced molybdenum) was used to investigate its response to plasma nitriding in terms of layer formation and hardening at temperatures between 500 and 760 °C using various times. A thin hard nitride case plus a shallow diffusion zone was formed after plasma nitriding. The thickness of nitride layer increased with the treatment temperature and time. The nitrided surface of molybdenum alloy had a low coefficient of friction against the Al2O3 counterpart ball at ambient atmosphere and elevated temperatures, and the wear resistance of the surface was greatly improved. Molybdenum had a tendency to react with nitrogen to form a mixed nitride phases at the tested temperature range, and the TZM alloy had an activation energy of 330 kJ/mol.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Studies on the development of TZM alloy by aluminothermic coreduction process and formation of protective coating over the alloy by plasma spray technique10.1016/j.ijrmhm.2011.04.010 ↗
2. International Molybdenum Association (IMOA)
3. Titanium-Zirconium-Molybdenum (TZM) alloy against Al2O3 and Si3N4 balls under several environments and temperatures10.1016/j.triboint.2016.10.049 ↗
4. Microstructure of a molybdenum nitride layer formed by nitriding molybdenum metal10.1111/j.1151-2916.2001.tb00810.x ↗
5. The carburization and nitriding of molybdenum and TZM10.1016/0263-4368(93)90046-I ↗
6. Edrisy · 2016 · 63
7. Investigations on a nitriding process of molybdenum thin films exposed to (Ar–N2–H2) expanding microwave plasma10.1016/j.surfcoat.2008.10.012 ↗
8. Expanding microwave plasma process for thin molybdenum films nitriding: nitrogen diffusion and structure investigations10.1016/j.surfcoat.2011.03.056 ↗
9. Plasma nitrided and TiCN coated AISI H13 steel by pulsed dc PECVD and its application for hot-working dies10.1016/j.surfcoat.2004.03.048 ↗
10. XPS and XRD studies of fresh and sulfided Mo2N10.1016/S0169-4332(98)00267-0 ↗
11. Active screen plasma nitriding of 316 stainless steel for the application of bipolar plates in proton exchange membrane fuel cells10.1016/j.ijhydene.2014.04.102 ↗
12. Plasma-nitriding and characterization of FeAl40 iron aluminide10.1016/j.actamat.2014.11.044 ↗
13. Weaver · 1972
14. Molybdenum nitride films: crystal structures, synthesis, mechanical, electrical and some other properties10.3390/coatings5040656 ↗
15. Influence of nitriding mechanisms on surface roughness of plasma and gas nitrided/nitrocarburized gray cast iron
16. The molybdenum-nitrogen phase diagram10.1016/0022-5088(78)90073-5 ↗
17. Effect of nitrogen pressure, bias voltage and substrate temperature on the phase structure of Mo–N coatings produced by cathodic arc PVD10.1016/S0257-8972(02)00866-6 ↗
18. Crystal structure and high-pressure properties of γ-Mo2N determined by neutron powder diffraction and X-ray diffraction10.1016/j.jssc.2006.03.011 ↗
19. Jehn · 1989
20. Annealing temperature effect on the mechanical and tribological properties of molybdenum nitride thin films10.1186/2193-8865-3-5 ↗
21. Characterization of molybdenum nitride coatings produced by arc-PVD technique10.1016/S0257-8972(97)00432-5 ↗
22. Tribological properties of silver- and copper-doped transition metal oxide coatings10.1016/S0043-1648(02)00292-2 ↗